Railcraft Locomotive

[Antenor Ketkaew]

SteamLocomotives are a form of Minecart added by the Railcraft mod. When provided with fuel and water they will move on their own, clearing any mobs from on the tracks in front of them. They accept any burnable fuel, from Sticks to Coal Coke, and need Water to run. It burns the fuel and consumes the water to build up heat. Once its heat has passed 100C, it will begin building up Steam, which is consumed to move.

They have an internal water tank of 6 Water Buckets. Water can be added to the tank using a Liquid Loader, by right-clicking the locomotive with a Water container in hand, or placing a Water container in the top-right slot of its GUI. The locomotive will also draw water from a linked Tank Cart to fill its internal tank.

Shutdown will stop the Locomotive, finish burning the current piece of fuel, and then reduce the Locomotive's heat. It is best to put locomotives into shutdown when (and only when) they will be idle for significant periods of time. Due to the long and expensive warm-up period, rapidly cycling between Shutdown and Running can use more fuel than simply setting the locomotive to "Idle".

Idle will stop the Locomotive, but continue to burn the fuel and consume the water at a significantly reduced rate. Idling is recommended for locomotives that are likely to be moving again in the near future.

Running is the mode where the Locomotive can move. It has five different speed settings, denoted with arrows (including a single reverse speed). Locomotives that are not set to "running" can only be moved by whacking the rear of their train with a crowbar - they are otherwise completely immobile. This means that making a train move typically requires the locomotive to be running and provided with fuel.

The Locomotive can be painted with Dye in a crafting Table. The Dye on top of the Locomotive will color its hull, the Dye below it will color the footplate. Two Dyes must be used to paint the Locomotive. Locomotives whistle when they travel over Whistle Tracks, when the player presses the Whistle key while riding in a linked Minecart, or periodically at random. The Whistle can be tuned with a Whistle Tuner.

Other vehicles, such as Minecarts and its variants, can be linked to a Steam Locomotive using a crowbar. Right-clicking with the crowbar will reverse the direction of the Steam Locomotive on the track. If it is linked to other vehicles, they will not be flipped with the locomotive; this will cause the locomotive to instead push them rather than pull.

It runs on an internal steam boiler, and as such will consume solid fuel items (such as coal coke, charcoal, and wood) and water to produce steam. When the steam tank is more than half full (and the "Running" mode is active), the locomotive will move forward at the speed it's set to. The number of other vehicles linked to it and the slope of the track will affect the speed of the locomotive.

There are three modes on the Steam Locomotive: Running, Idle, and Shutdown. When running, the locomotive will burn fuel and, provided the steam tank is sufficiently filled, move forward at the set speed. When Idle, the locomotive will not move but will continue burning fuel to continue producing steam and keep the internal temperature rising. When in Shutdown, the locomotive will cease burning fuel, and once the boiler cools down will stop producing steam as well.

Provided the locomotive is going fast enough, any mobs standing in front of a running train will instantly be killed. This will also happen to any players, regardless of them being in Creative mode or not, and a randomly-selected death message from the list further down will be broadcast.

Despite the danger of death, this mechanic can be used to a player's advantage. For example, a Creeper on the tracks of a typical Vanilla railway will turn a standard Minecart around, often having enough close contact with the player riding it to detonate. With a Steam Locomotive, however, the Creeper will be run over by the locomotive before it has the chance to explode. This makes a Steam Locomotive railway comparably safer than a Minecart railway powered by booster rails, even if completely exposed to mobs.

The Electric Locomotive is a special type of minecart from the Railcraft mod. This cart is powered by Railcraft's energy, which can be created by giving an Electric Feeder Unit IndustrialCraft 2's Energy Units. It will only run on the Electric type tracks normally, but if a sufficiently-charged energy storage cart is linked into the train, the locomotive can receive power from that in order to run on other track types.

The Electric Locomotive has two modes: Running and Shutdown. Shutdown mode is essentially turning off the locomotive. The Running mode is the basic "on" mode. This mode will allow the locomotive to run as normal, consuming as much energy as needed.

The locomotive also has various arrow buttons. These buttons are used to control the speed and direction of the locomotive. It can be put into reverse, but will only move at minimum speed. It defaults at maximum speed and moving forward.

The locomotive can be given Golden Railway Tickets or normal Railway Tickets to help in switching and signaling mechanics. The ticket should be put in the slot, and it will mimic it, or use it, depending on the type of ticket. Once this is set the location cannot be removed, unless it is hit with a Crowbar. The ticket can be locked with the lock button. This will not prevent its destination from disappearing on break, but it will prevent anyone else from changing it.

Multiple locomotives can be used in a single train of linked carts for adding more power and speed. Locomotives can be quickly turned around using a Crowbar. The gray dot points in the direction that it will move. For switching purposes, the locomotive can also be painted. This will use a secondary color and a primary color.

Burwood was the first Locomotive built in Newcastle NSW, as well as the first locomotive built outside a metropolitan area. It was built by J.S. Rodgers Engineering for E.C. Merewether Esquire. It was built for the price of 1350 pounds. The order was received 9 July 1877 and the work was completed June 1878.

The boiler was constructed of "Lowmoor Plates", as also were the axles and all working parts that were case-hardened. The firebox of the boiler was made of copper and the tubes of solid drawn brass. There were two injectors, colonial made, each of which was capable of supplying the boiler with water. All steam and feed pipes were of copper and brass.

Railcraft is a mod created by CovertJaguar that primarily expands upon existing Minecart functionality, including new tracks, new carts, a signaling system, and the ability to link carts to one another. As well as advanced Minecart and rail systems, Railcraft adds unique ways of item transportation, liquid storage, and item-based redstone logic.

It also has a very extensive set of decorative blocks, such as Quarried, Abyssal, Blood Stained, Frost Bound, Sandy, Infernal, Bleached Bone, and Nether. As well as these new block sets, it also adds new variations of the existing block sets, such as Slabs, Walls, and Stairs.

Railcraft is split into various different sections, called Modules. These modules are used for disabling/enabling certain parts of this mod. They can be toggled in the /minecraft/config/railcraft/modules.cfg configuration file by setting them to either true or false. There are 25 modules currently present in Railcraft:

The 'Trojan' range included B,C,B'B' and C'C' wheel arrangement designs, with an axleload of up to 25 tonnes, and capable of being built to track gauges between 610mm and 1676mm. Locomotives could be supplied with a variety of diesel engines, up to 3,000 hp (2,200 kW), with diesel electric or diesel hydraulic transmissions, with either radial arm or commonwealth type bogie suspension designs, and with single or double cab variants. The family was designed for industrial operators, and trip work.[4][5]

The Port Talbot locomotive's chassis were constructed at Corus's Llanwern site, with assembly at Scunthorpe taking place during 2008.[6] The first locomotive, number 920, went into service in late 2009.[7] 921 and 922 were delivered in 2011.[1]

The locomotives were found to have a number of design issues, and the fourth unit was modified by the Hunslet Engine Company. Modifications included the replacement of a ceiling-mounted driving panel to a more conventional position, replacement of the engine control electronics, and other modifications to solve a number of teething and design issues. Dynamic testing of the rebuilt locomotive took place at the Chasewater Railway, and the locomotive began in-service testing at Port Talbot steelworks in April 2012.[1] The other 3 locomotives were also to be modified by Hunslet in 2012.[1]

I currently have several old Rivarossi steam engines that have Pizza cutter flanges. I was able to get these engines to run on some old Railcraft code 70 track that I had on hand, from years past. The wheels JUST cleared the rail spike detail. I believe that Railcraft became ME track. I, in turn, tried Shinohara Code 70, which was available at a local MRR shop, and found that the flanges didn't clear the spike detail. My problem is that I can't seem to find ME track at any hobby or MRR shops in my local area, and I hesitate to order a bunch of ME code 70 to find out if I will have the same problem. In short, does anyone out there know if the Railcraft and ME code 70 is the same, say except for the fact that the Railcraft was brass vs ME is nickle-silver? Any input on this will be appreciated.

not sure if they're the same company... but I have some older ('60s era) Mantua locos with pizza-cutter flanges, and they clear the spike head detail by not much more than .005" (assuming of course my math is correct in regard to the height of the rail and the depth of the wheel flange)...

If your problem is oversize flanges, the solution is to turn them down, or replace the wheels with some with RP-25 flanges. I have reduced oversize driver flanges by filing them (very gently) while running the motor at moderate speed. The object is to keep the driver tires cool while slowly bringing them down to something closer to the proper size. Unpowered wheels can be filed down while rotating them with a rubber wheel chucked in a power drill.

3a8082e126