problem in installing gr-gsm

[mahmoud shakra]

Hi Sir,

i am new in Linux and Ubuntu ,, i am running Ubuntu 14.04  and i tried to install gr-gsm using Pybombs every thing was okay till the installation reached the libosmocore it failed to continue after switching it to verbose mode with -v it showed up that it can not find talloc as shown in attached , the version of Gnuradio installed in the  3.7.2 in pybombs but i installed Gnuradio 3.7.10 in the home folder ,, can anybody help me please ??!!

[Tomcsányi Domonkos]

Hi Mahmoud,

Can you try running

sudo apt-get install libtalloc-dev

And then retry?

Cheers,
Domi

> 2015. dec. 29. dátummal, 11:58 időpontban mahmoud shakra <mahmou...@gmail.com> írta:
>
> Hi Sir,
>
> i am new in Linux and Ubuntu ,, i am running Ubuntu 14.04 and i tried to install gr-gsm using Pybombs every thing was okay till the installation reached the libosmocore it failed to continue after switching it to verbose mode with -v it showed up that it can not find talloc as shown in attached , the version of Gnuradio installed in the 3.7.2 in pybombs but i installed Gnuradio 3.7.10 in the home folder ,, can anybody help me please ??!!
>

> --
> Otrzymujesz tę wiadomość, bo subskrybujesz grupę „gr-gsm” w Grupach dyskusyjnych Google.
> Aby anulować subskrypcję tej grupy i przestać otrzymywać od niej wiadomości, wyślij e-maila na gr-gsm+un...@googlegroups.com.
> Aby opublikować wpis w tej grupie, wyślij e-maila na gr-...@googlegroups.com.
> Aby wyświetlić tę dyskusję w internecie, otwórz https://groups.google.com/d/msgid/gr-gsm/da28f3f6-b073-486c-a5f8-83ef2b18dc0f%40googlegroups.com.
> Więcej opcji znajdziesz na https://groups.google.com/d/optout.
> <Screenshot from 2015-12-26 23:15:10.png><Screenshot from 2015-12-29 12:42:32.png>

[Tomcsányi, Domonkos]

Please always use "reply-all" so your mails are sent to the mailing list as well not just to me.

Now onto your question:

Try to run it as root like this:

sudo airprobe_rtlsdr.py

2015. dec. 31. dátummal, 23:59 időpontban mahmoud shakra <mahmou...@gmail.com> írta:

sorry if have done it .. i installed new fresh ubuntu and updated it first then after it faild to install libosmocore i typed "  sudo apt-get install libtalloc-dev "as u told me then it correctly continued installation then installed gr-gsm

thank u for ur helpful support Mr. Domonokos

now the question is when i type " airprobe_rtlsdr.py" to start gr-gsm it faild and showed :
linux; GNU C++ version 4.8.4; Boost_105400; UHD_003.010.git-90-g33419b5f

gr-osmosdr v0.1.4-58-g810a981d (0.1.5git) gnuradio 3.7.10git-31-gb17bcb88
built-in source types: file osmosdr fcd rtl rtl_tcp uhd hackrf bladerf rfspace airspy redpitaya
Using device #0 Generic RTL2832U OEM
usb_open error -3
Please fix the device permissions, e.g. by installing the udev rules file rtl-sdr.rules

FATAL: Failed to open rtlsdr device.

Trying to fill up 1 missing channel(s) with null source(s).
This is being done to prevent the application from crashing
due to gnuradio bug #528.

Using Volk machine: sse4_2_64
Traceback (most recent call last):
  File "/usr/local/bin/airprobe_rtlsdr.py", line 270, in <module>
    tb.start()
  File "/usr/local/lib/python2.7/dist-packages/gnuradio/gr/top_block.py", line 109, in start
    top_block_start_unlocked(self._impl, max_noutput_items)
  File "/usr/local/lib/python2.7/dist-packages/gnuradio/gr/runtime_swig.py", line 3668, in top_block_start_unlocked
    return _runtime_swig.top_block_start_unlocked(*args, **kwargs)
RuntimeError: GSM input adaptor(9): insufficient connected input ports (1 needed, 0 connected)

On Fri, Jan 1, 2016 at 12:44 AM, mahmoud shakra <mahmou...@gmail.com> wrote:

sorry what should i type exactly ?  sudo apt-get -f install what ?

On Thu, Dec 31, 2015 at 10:44 PM, Tomcsányi Domonkos <do...@tomcsanyi.net> wrote:

Could you be so kind and follow what apt suggests e.g. run sudo apt-get -f install

?

Somehow your package management system is messed up, that’s why it’s not working.

2015. dec. 31. dátummal, 15:38 időpontban mahmoud shakra <mahmou...@gmail.com> írta:

mshakra@shakra-M:~/pybombs$  sudo apt-get install libtalloc-dev
Reading package lists... Done
Building dependency tree      
Reading state information... Done
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies:
 gnuradio : Depends: libvolk1-bin but it is not going to be installed
 gnuradio-dev : Depends: libvolk1-dev but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).

On Thu, Dec 31, 2015 at 4:35 PM, mahmoud shakra <mahmou...@gmail.com> wrote:

mshakra@shakra-M:~/pybombs$ sudo apt-get install python-talloc
Reading package lists... Done
Building dependency tree      
Reading state information... Done
python-talloc is already the newest version.
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies:
 gnuradio : Depends: libvolk1-bin but it is not going to be installed
 gnuradio-dev : Depends: libvolk1-dev but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).

--

kind regards,

Cap.  Mahmoud M.Shakra

--

kind regards,

Cap.  Mahmoud M.Shakra

--

kind regards,

Cap.  Mahmoud M.Shakra

--

kind regards,

Cap.  Mahmoud M.Shakra

[mahmoud shakra]

i did run it as a root and nothing new

mahmoudshakra@shakra:~$ sudo airprobe_rtlsdr.py

linux; GNU C++ version 4.8.4; Boost_105400; UHD_003.010.git-90-g33419b5f

gr-osmosdr v0.1.4-58-g810a981d (0.1.5git) gnuradio 3.7.10git-31-gb17bcb88
built-in source types: file osmosdr fcd rtl rtl_tcp uhd hackrf bladerf rfspace airspy redpitaya

Using device #0 Realtek RTL2838UHIDIR SN: 00000001
Detached kernel driver
Found Rafael Micro R820T tuner
[R82XX] PLL not locked!
Exact sample rate is: 2000000.052982 Hz
[R82XX] PLL not locked!

Using Volk machine: sse4_2_64
Traceback (most recent call last):
  File "/usr/local/bin/airprobe_rtlsdr.py", line 270, in <module>
    tb.start()
  File "/usr/local/lib/python2.7/dist-packages/gnuradio/gr/top_block.py", line 109, in start
    top_block_start_unlocked(self._impl, max_noutput_items)
  File "/usr/local/lib/python2.7/dist-packages/gnuradio/gr/runtime_swig.py", line 3668, in top_block_start_unlocked
    return _runtime_swig.top_block_start_unlocked(*args, **kwargs)
RuntimeError: GSM input adaptor(9): insufficient connected input ports (1 needed, 0 connected)

[Piotr Krysik]

Hi,

I corrected the problem you mentioned yesterday. Please download new
version of gr-gsm. From pybombs/src/gr-gsm directory:
git pull
then reinstall gr-gsm with (from pybombs/src/gr-gsm/build directory):
make install

Best Regards,
Piotr Krysik


W dniu 03.01.2016 o 08:58, mahmoud shakra pisze: