Re: [gqrx] RSPA1 with Gqrx

[Alexandru Csete]

On Tue, Jun 12, 2018 at 5:08 PM, beuzbeuz78 <beuzb...@gmail.com> wrote:
> Hi, i would like to know what setting should i make in Gqrx for the RPS1A ?
> I use Manjaro linux with Mate desktop.
> Thanks in advance

How did you install gqrx? Native packages don't include SDRPlay
support due to the closed source driver.

Alex

[beuzbeuz78]

I install Gqrx with Pamac (Software manager of Manjaro) i could also install Soapysdr and Soapysdrplay.

I saw on your supported hardware page the Sdrplay need "soapy=0,driver=sdrplay" is it enought ?

Tomorow my RPS1A arrive ! so excited !

[Alexandru Csete]

Yes, try that first. If the packages are recent, it could work. If
not, I have a backup solution you can try.

Alex

> --
> You received this message because you are subscribed to the Google Groups
> "Gqrx SDR" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to gqrx+uns...@googlegroups.com.
> To post to this group, send email to gq...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/gqrx/94fc1375-aca2-41f3-b970-0187ac045d2f%40googlegroups.com.
>
> For more options, visit https://groups.google.com/d/optout.

[beuzbeuz78]

Ok i will try since my RSPA1 arrive and i will see if it work ! if not i tell you and tell me the backup solution ;-) thanks again

[beuzbeuz78]

Hi, it doesn't work with soapy=0,driver=sdrplay....

I installed soapysdr-git & soapysdrplay-git.

Could you give me the backup solution ?

Thanks a lot.

[beuzbeuz78]

i successfully by using by using binary package from your site. the device string is "sdrplay=0"

[Alexandru Csete]

On Thu, Jun 14, 2018 at 12:00 PM, beuzbeuz78 <beuzb...@gmail.com> wrote:
> i successfully by using by using binary package from your site. the device
> string is "sdrplay=0"

Good, that was the backup solution :-)

Alex

[Sebastien]

Yes, Gqrx is the best solution for me with my RSP1A in linux !!

Thanks a lot