Adding a metal plate layer in gpyro_0.8186

[Alexandra.D]

Hello guys, 

I want to develop my gpyro_0.8186 script to include a metal plate layer to model a sandwich panel. I don't know how to do this so I was wondering if anyone had an example I could look at or any tips on how to do this. 

BW

Alexandra 

[Richter, Franz H]

Dear Alexandra,

I am not aware of anyone having done this in the 0.8 version. However, Izabella did included an Al block in 0.7 in the simulations (https://www.sciencedirect.com/science/article/pii/S0010218015002667). It was included as an extra layer.

Kind Regards

Franz Richter    

Research Assistant 

Department of Mechanical Engineering 

Imperial College London

http://www.imperial.ac.uk/people/franz.richter11

---

From: gpyro-wor...@googlegroups.com <gpyro-wor...@googlegroups.com> on behalf of Alexandra.D <alexandra...@gmail.com>
Sent: 02 March 2020 12:24
To: Imperial Gpyro Working Group <gpyro-wor...@googlegroups.com>
Subject: Adding a metal plate layer in gpyro_0.8186

 

This email from alexandra...@gmail.com originates from outside Imperial. Do not click on links and attachments unless you recognise the sender. If you trust the sender, add them to your safe senders list to disable email stamping for this address.

--
You received this message because you are subscribed to the Google Groups "Imperial Gpyro Working Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email to gpyro-working-g...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/gpyro-working-group/5959fadd-f352-4892-8ccc-cd3b60eea397%40googlegroups.com.