Wavetek 9100
Lola Bergo
If you're constantly being asked to calibrate more and more with less and less, the 9100 Calibration System from Fluke Calibration is the answer you've been waiting for. Its exceptional performance in both the analog and digital domain allows it to calibrate an extremely wide range of test and measurement equipment - quickly, efficiently and to ISO 9000 requirements.
Take advantage of the Model 9100's unique procedure mode, which guides operators step-by-step through the entire calibration process, and you'll not only calibrate more with less - you'll do it faster.
The 9100 is a multifunction calibrator with a breadth and depth of outputs never before available from a single calibration source. In addition to DC and AC voltage to 1050V, variable Resistance to 400MΩ and DC and AC current to 20A (1000A via the optional current coils), the 9100 delivers continuously variable capacitance values to 40mF and conductance values to 2.5 milliSiemens. It also generates digitally synthesized and phase-locked sine, square, triangle, impulse and trapezoidal waveforms, variable amplitude pulses to 10 MHz, pulse widths to 2 seconds, and duty cycles between 0.05% and 99.95%.
Fit the insulation/ continuity tester option and it synthesizes resistance values as high as 2GΩ at test voltages up to 1000V. Fit the power meter option and it simultaneously generates variable phase angle voltages and currents that allow you to calibrate power meters up to 1 MW or 1 MVAR.
Never before has such versatility and simplicity been synonymous with such a comprehensive calibration package as the Model 9100. Incorporating PCMCIA card technology for stand alone operation, the Model 9100 has the unique ability to calibrate 15 different categories of General Purpose Test Equipment, in a single portable calibration source. This together with the capacity to directly generate results certificates compliant with your Quality System requirements, makes the Model 9100 Multifunction Calibrator a cost effective, yet simple solution to your everyday needs.
If you want to write your own procedures, or you want to fully automate the calibration of instruments that can be controlled and interrogated via the IEEE-488 bus, you can integrate the 9100 into a PC-based calibration workstation, by running MET/CAL Plus software.
Frequently used functions such as voltage, current and resistance have dedicated front-panel keys that allow you to activate them at the touch of a button. Less commonly used functions are selected using screen menus and soft-keys to avoid cluttering the front-panel with too many keys.
Wavetek 9100 General Calibrators
Follow us for the latest equipment specials.
Refurbished Wavetek 9100Our Price:$16,992.00
$14,992.00
Sell EquipmentRepairsAdd to cartE-mail this page
Wavetek 9100 Details
Wavetek 9100
Also branded as Fluke 9100 after Fluke's acquisition of this product family. If you're constantly being asked to calibrate more and more with less and less, Wavetek's 9100 Calibration System is the answer you've been waiting for. Its exceptional performance in both the analog and digital domain allows it to calibrate an extremely wide range of test and measurement equipment - quickly, efficiently and to ISO 9000 requirements. For the 9100, calibrating everything from handheld digital multimeters to high performance digital-storage oscilloscopes is all part of a day's work. Take advantage of the Model 9100's unique procedure mode, which guides operators step-by-step through the entire calibration process, and you'll not only calibrate more with less - you'll do it faster. The 9100 is a multifunction calibrator with a breadth and depth of outputs never before available from a single calibration source. In addition to DC and AC voltage to 1050V, variable Resistance to 400Mohms and DC and AC current to 20A (1000A via the optional current coils), the 9100 delivers continuously variable capacitance values to 40mF and conductance values to 2.5 milliSiemens. It also generates digitally synthesized and phase-locked sine, square, triangle, impulse and trapezoidal waveforms, variable amplitude pulses to 10 MHz, pulse widths to 2 seconds, and duty cycles between 0.05% and 99.95%. Add one of the two oscilloscope calibration options and it generates all the waveforms required to calibrate oscilloscopes up to 250 MHz or 600 MHz. No other multi-product calibrator gives you such wide workload coverage and versatility.
Wavetek (Fluke) 9100 can be used to calibrate digital multimeters up to 8.5 digital and oscilloscopes with bandwidths up to 600MHz.
The Wavetek 9100 is capable of generating DC & AC voltages to 1050V, Resistance up to 400MΩ and DC & AC current up to 20A (1000A via the optional current coils). The Wavetek 9100 also delivers variable capacitance values up to 40mF.
With the addition of the two oscilloscope calibrater options, it can generate waveforms required to calibrate oscilloscopes up to 250 MHz or 600 MHz.
The 9100 can calibrates over 15 different categories of general-purpose test equipment including power meters, insulation testers and oscilloscopes. Automation is available through METCAL, streamlining the calibration process and allowing faster throughput.
The new high performance 5720A offers an unprecedented accuracy level that delivers the lowest uncertainties available. It calibrates more of your precision meter workload, more easily and cost effectively than ever before. That's why the Model 9100 incorporates a unique procedure mode that guides untrained operators through the entire calibration process, with direct printout of calibration results on a connected printer.
Hi my name is Said and I work in the National Institute of Industrial Technology of Argentina, in a calibration lab. We have a Wavetek 9100 Calibrator, Agilent 34401A Digital Multimeter and a NI GPIB IEEE-488-2 board. I have a problem with the Calibrator driver, in the transition from 90 V to 110 V in the DC and AC Voltage the instrument starts to ring an alarm and the program shows me the follow message: "Error -1073807339 occurred at VISA Read in wt9100 Error Query.vi->wt9100 Configure Output State.vi->wavetek multipoint VCC con array desde txt modificado 1.vi" and "Possible reason(s):
VISA: (Hex 0xBFFF0015) Timeout expired before operation completed."
The Wavetek 9100 is a multifunction calibrator with a breadth and depth of outputs never before available from a single calibration source. In addition to DC and AC voltage to 1050V, variable Resistance to 400M and DC and AC current to 20A (1000A via the optional current coils), the Wavetek 9100 delivers continuously variable capacitance values to 40mF and conductance values to 2.5 milliSiemens. It also generates digitally synthesized and phase-locked sine, square, triangle, impulse and trapezoidal waveforms, variable amplitude pulses to 10 MHz, pulse widths to 2 seconds, and duty cycles between 0.05% and 99.95%
This form collects your name, email, phone number and other information to help us serve you. This information may be stored for later use by GTE. Please check this box to confirm that you understand this. For complete details, please refer to our Privacy Policy.
Optimize performance, results and calibration processes with this Fluke 9100S/725-KIT Hi-Temp Dry-Well and Process Calibrator Kit. Ideal for use in the field or the laboratory, it will test and calibrate almost any process parameter and comes equipped with the dry-block calibrator and the multifunction process calibrator. The versatile design of the kit allows it to work on a large selection of processes to improve the efficiency and accuracy of the workplace.
Easily source and measure a wide variety of process parameters and test many process devices. This unit is capable of measuring and sourcing mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules. Additionally, it features a small and compact design.
I recently bought a fixer-upper Fluke 9100 from Andy.
Andy said the PSU was shot, a blown capacitor and there was an issue with the screen.
First stop was the PSU. After replacing the poly box caps on the input line I was still no better off, the PSU trips the power out. After a fair amount of testing and head scratching I found the 12v PCB transformer to be blown and was shorted. Its game over for this PSU for now and ill try an alternative source.
So I dug out a micro ATX power supply which had the right voltages and wired it in.
At least I know the screen works, I was beginning to worry.
Clearly there are a couple of issues with the display. I started probing around the driver chips at the back on the PCB until I put my probe on one of the output pins and I blew the 125mA fuse that supplies the 70v.
This little mishap led me to find that two of these 5818 driver chips were shorted internally and were outputting 70v on one of their pins. I removed the two offenders and ordered a couple of replacements from eBay.
While I was waiting for the chips to arrive I burned a new 2764 EPROM for the Z8 processor on Andys recommendation.