Gigabyte Network Adapter Driver Windows 10

[Olivie Inoue]

Hey. Having a weird issue with my ethernet adapter. Everything had been working good and there were no notable changes in my setup (hardware or software) that sparked this. I was off my computer for dinner, came back, and the internet was no longer working. I'll attach as many details as I can, including the output of the SSU.

I'm on Windows 10 64 bit Pro. I'm using Verizon FIOS and the internet itself is working fine. WiFi is fine and I've tried several combinations of ports and ethernet cables for my PC. Beyond that, I can have other devices work and generate IP addresses from my router via a wired connection. So, I'm assuming it's local to my machine in some way. The error message I ultimately get is this, from the Windows diagnostic tool:

"Ethernet doesn't have a valid ip configuration fix windows 10"

Physically the light on the back of my PC is a solid orange. I'll provide a link to the manual but I have an ASRock X570 Steel Legend motherboard and the ethernet (Intel I211 Gigabit) is on that board. Below is a link to that motherboard manual and attached is the output of the SSU tool.

Since you already performed troubleshooting to possibly fix the issue and we can see that you are using the latest driver from your OEM, we just want to check if you are willing to try the latest generic driver from our Intel download center link below? Please be advised that the software drivers linked from this page are generic versions, and can be used for general purposes. However, Original Equipment Manufacturer(OEM) might have altered the features, incorporated customizations, or made other changes to the software or software packaging they provide. We would suggest raising the issue to Asrock as well to check if they have newer driver that you can test aside from the one on their download site.

Please be informed that we will now close this request since we haven't received any response from our previous follow ups. Please feel free to post a new question if you may have any other inquiry in the future as this thread will no longer be monitored.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

I have rebooted and disabled driver signature enforcement just incase but no change. I have also downloaded and installed the " Intel Management Engine Interface" from the link above which installed without issues. Rebooted and the same issue with the LAN drivers!

Lastly I see the motherboard only supports Windows 7, Windows 8 and Windows 10. Based on the nature of Server 2012 R2 I would say you can run it but as they state on their page they do not have any support for other OS others than the ones they have listed.

I too faced the same issue for Windows 2008 R2, installer will not work. But through update driver on Device Manager for Network, it updated correctly for Windows 2008 R2 Ent, but failed for Windows 2008 R2 Std. Same driver works for Windows 2008 R2 and not for Windows 2008 R2 Std. Strange.

Encountered the same problem on Asus PRIME H270-Plus trying to install network driver on WS2012R2. Everything pointed that MB has Realtek LAN adapter but drivers never installed. Solution was here: -Ethernet-Connections-CD - in folder PRO1000\Winx64\NDIS64 I found a driver named something like Intel I210 Gigabit Ethernet Controller and it successbully installed.

You can use certain settings for optimum GigE Vision streaming performance, including reduced CPU load and smaller likelihood of dropped frames. Use the following settings for the Gigabit Ethernet adapter jumbo packet and receive buffers for the best performance.

Set Jumbo Frame (or Jumbo Packet) to the maximum supported value, for example, 9014 bytes. Gigabit Ethernet controllers that support jumbo frames can transfer packet sizes larger than the standard Ethernet frame size (1500 bytes).

Make sure that any vendor drivers are unchecked and that anti-virus program drivers are unchecked. If you cannot uncheck the anti-virus software from the adaptor due to organization restrictions, you may need to purchase a second gigabit Ethernet card. In this case, leave all of the options as is for the network card for your PC, and configure the second card as described here, which will only connect to your camera.

To configure automatic IP address assignment for the camera network connection, on the General tab, select Obtain an IP address automatically and Obtain DNS server address automatically, and click OK.

If you have multiple cameras connected to multiple Ethernet cards, you cannot have them all set to automatic IP configuration. You must specify the IP address for each card and each card must be on a different subnet.

I had a problem with my Internet connection it didn't work since my pc turned off accidentally so I Unstalled network adapter drive (Intel 82579lm gigabyte network connection) trying to fix the problem by reinstall it again but I didn't find the correct drive

If you see an ethernet controller device, I have zipped up and attached the W10 ethernet controller drivers that Windows Update would have installed automatically for you if you had an internet connection.

Hi. I'm currently having some issues with my ethernet network connection on my Dell XPS 15 9570. The XPS doesn't have an ethernet port, but I've got a USB3.0 gigabit ethernet adapter because ethernet is more reliable than WiFi where I live. This setup has worked for about a year. Now, however, the connection keeps dropping for a few seconds once every few minutes.

This leads me to believe there is a hardware issue in my laptop. Does anyone know how the hardware handles a network connection via the USB ports? I know there's a WLAN adapter in the XPS which can easily be replaced, but I don't suppose that that one has anything to do with my ethernet connection issues.

My theory is that it's an issue with the network card. I believe the network card for the XPS 15 is integrated on the motherboard. Can anyone confirm this? Is this part replaceable? Or would I have to replace the full motherboard if that is the issue?

@jurrdb there is no Ethernet controller or "card" embedded into the XPS 15's motherboard, because as you say the system has no built-in Ethernet. If the system had such a controller, it would also have an Ethernet connector on the system itself. USB Ethernet adapters work by having an Ethernet controller chip built into the adapter itself. It's just that whereas an internal Ethernet controller/card would be embedded onto the motherboard or installed as an actual expansion card (in desktops/servers) and would therefore communicate with the system over PCIe, a USB Ethernet adapter connects its controller to the system over USB (to a USB controller that then connects over PCIe).

Are you sure that the Realtek driver is the correct one for that particular adapter? That driver is listed on the XPS 15's support.dell.com Drivers page because that's the correct driver for Dell docks that can be used with the XPS 15 -- because that's the controller that Dell chose to embed into those docks. It will NOT necessarily be the correct driver for the USB Ethernet adapter that you have, because there are of course multiple vendors making Ethernet controllers, and the manufacturer of your USB adapter may have chosen to use a different chipset. Simply having the Realtek driver installed shouldn't be causing any problems even if it's unnecessary, but you might want to make sure you're running the latest version of the driver that's actually appropriate for your adapter. Since you unfortunately didn't specify which specific USB Ethernet adapter you have, I can't tell you what the correct driver would be.

All that said, it admittedly would be strange for a driver issue to be the culprit if you're seeing this behavior on two different OSes running on that system -- unless you just happen to have outdated drivers on both OSes.

If driver updates don't resolve this, I would start by testing another USB Ethernet adapter, even though I realize that you've successfully tested your existing adapter on other systems. The reason I say that is because if it's a hardware issue with the XPS 15, it would likely be related to the USB controller somehow -- although in that case if you're observing these problems even when connecting it to different USB ports, I would expect you to see issues with other USB peripherals as well.

And no, the WLAN adapter shouldn't make any difference to the operation of a USB Ethernet adapter.

This one was driving me nuts for two days. I took an XPS 15 9570 that's been in use for years without issue (Ethernet or otherwise), wiped it, and installed Windows 10 from the latest ISO. Once in Windows I did a full install of all the latest Dell drivers, firmware, and BIOS. After doing the BIOS update my downloads would stop after a few seconds. Switching to WiFi and everything worked fine, back to Ethernet and I'd get that spotty connection.

Troubleshooting: I uninstalled that Realtek USB Gigabit Ethernet driver and reinstalled it with every version I could find. Didn't work. I let Windows update do it for me. Didn't work. I hopped between the little Dell USB-C to Ethernet dongle, a TB16, WD19, and WD19TB dock. Same issue on all of them. In Windows Device Manager I cleared the save power checkbox on every USB device with a Power Management tab. Didn't work.

My Solution: I made my way into the BIOS to see if maybe there was a Thunderbolt setting or something that might look suspect. I cleared the processor C-States which I remember fixed some issue several years ago, might have been freezing, but that didn't fix this. What ultimately did fix it was under Post Behavior > MAC Passthrough, I set it to Disabled and now my Ethernet connections are solid (tested on the type-c dongle and the WD19). This is likely another breadcrumb that leads to the actual issue, but since I don't need machine's MAC address to be passed through for anything, I'm happy leaving it here. Hope this helps someone else out there, maybe years from now!

c80f0f1006