4iii Precision Power Meter & Cadence - no cadence reading.

[Peter Mac]

Hi,

Just getting used to the fantastic software but cannot find how to pair my 4iiii precison (left crank only) power meter as a device such that the GC software also picks up the cadence reading. There appears to be no option for power & cadence when selecting a device.Is this correct or am I, as I suspect, missing something? Any help would be appreciated.

Thanks,

Peter

[Peter Mac]

Additional info. - the cadence reading from the power meter works fine for the Edge 800 and the software I was using before, i.e. VeloReality.

[Jon Escombe]

Hi,

I'd expect it to just work as-is. If you can send me your antlog.raw
file from a short train session (a few minutes should suffice), I'll
take a look at what it's sending. You'll find that file in the GC
settings folder..

Cheers,
Jon

On 16/02/17 14:14, Peter Mac wrote:
>
>
> On Thursday, February 16, 2017 at 11:21:44 AM UTC, Peter Mac wrote:
>

> <https://www.facebook.com/permalink.php?story_fbid=10156746843186515&id=150629846514>

> Hi,
> Just getting used to the fantastic software but cannot find how to
> pair my 4iiii precison (left crank only) power meter as a device
> such that the GC software also picks up the cadence reading. There
> appears to be no option for power & cadence when selecting a
> device.Is this correct or am I, as I suspect, missing something? Any
> help would be appreciated.
> Thanks,
> Peter
>
>
> Additional info. - the cadence reading from the power meter works fine
> for the Edge 800 and the software I was using before, i.e. VeloReality.
>

> --

[lebowskii98 _]

Hi Peter,

Did you find a solution? I've got the same power meter and the exact same thing is happening. It works fine with my Edge 520 and with the trial I had with TrainerRoad.

Thanks.

[Jon Escombe]

Hi, if you're able to send me an antlog.raw file, I'll take a look at
the received data and see what's going on..

Thanks,
Jon