levneal enriquo walerian

0 views

Skip to first unread message

Laurelino Braendel

unread,

Aug 2, 2024, 7:54:17 PM8/2/24

to godanimens

123Scan is an easy-to-use, PC-based software tool that enables the quick and easy set-up of Zebra scanners. With over 600,000 users worldwide, this is the single utility you will need to setup your Zebra scanner.

ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. 2024 Zebra Technologies Corp. and/or its affiliates.

iFab EasyScan makes it easy to start digitizing workflows in O&P. The 3D scanning software is specially adapted to the requirements of taking patient measurements. It is particularly intuitive and easy to use.

iFab EasyScan means precise real-time capturing of patient measurements and accurate visualization including texture. It enables a short scanning distance, easy continuation of the scan in case of interruptions and working in offline mode. iFab EasyScan is the solution for seamless workflows and mobile, flexible working.

"In the past, my residual limb was plastered. I then sat there for a long time and had to wait for the plaster to dry. After that, you have all the mess that has to be disposed of. I am glad that there is now this quick, clean and above all pleasant solution with the iFab EasyScan!"

The iFabEasyScan is nice because you just hold it in one hand while having the digital display on your computer. It is very simple. I can do a scan in as little as 20 seconds. This allows me to be more patient focused. If I am spending less time working back in the lab, I can spend more time with my patient.

What is great about the iFab EasyScan is that it also captures the image and texture of the scanned object. So when you go to modify, you can refer back to those markings. You can look at the image and see where you placed your markers.

3. Start scanning and continue until you capture the entire object completely. Optionally, add more images to the job via the camera function. Now, you can upload the completed scan directly to the iFab Customer Center.

Reliable and free network scanner to analyze LAN. The program shows all network devices, gives you access to shared folders, provides remote control of computers (via RDP and Radmin), and can even remotely switch computers off. It is easy to use and runs as a portable edition. It should be the first choice for every network admin.

I registered to the site here just to answer any man experiencing this problem. One long year I have been waiting to fix the problem with my samsung SCX-3405 scanner problem. Ever since Windows 10 - 64 bit updated to 1803, probably a lot of people had this issue, Easy printer manager giving an error when trying to scan. When reinstalling the drivers 10 times didn't work, I found a solution to roll back Windows to earlier update, just so I can use my SCX-3405 scanner. As this option isn't available any more, because Windows updates your PC without asking, I gave up on the scanner. Yesterday I tried and for 1 hour going through the Internet, I found it, so I want to share it.

The problem was - if you install the drivers from the samsung page of SCX-3405, or the application (if you don't know Samsung have an easy to use printer installer application) called SamsungPrinterInstaller - it installs all the needed drivers for the printer and scanner, also diagnostics, but still the Easy printer manager CAN NOT LET YOU USE THE SCANNER, even if you manually install the drivers from the download page, cycle of reinstalling scanner driver and failing.

Use the SamsungPrinterInstaller (the site manual links should work also) as you all did, but the problem is (as I'm not that of an expert in computers), that HP or whoever is in charge of the drivers of our printers - DIDN'T ADDED THE APPLICATION TO CREATE THE DOCUMENT AFTER SCANNING, SO EASYPRINTER MANAGER GIVES YOU AN ERROR!!! The application is called Samsung Easy Document Creator from Software tab in the printer page for downloads. BUT THERE IS NO SUCK APPLICATION IS SXC-3405 DOWNLOADS PAGE FROM HP!!! You would have to download it from other similar printer page for example Samsung Xpress SL-M2070 downloads page - Software tab - Samsung Easy Document Creator, download it, install it and voala, scanner will work. Here is a link to the download page of SL-M2070 - -en/drivers/selfservice/samsung-xpress-sl-m2070-laser-multifunction-printer... .

I registered for this site just to upvote your comment. Can't believe it was this simple, this worked for me! I have a Samsung SCX-3405W and had just about given up on ever being able to scan with it again. Thanks a bunch!

...for example Samsung Xpress SL-M2070 downloads page - Software tab - Samsung Easy Document Creator, download it, install it and voala, scanner will work. Here is a link to the download page of SL-M2070 - -en/drivers/selfservice/samsung-xpress-sl-m2070-laser-multifunction-printer... .

Thanks for the solution. I posted the same issue on HP community forum, but there was no answer. There was an error all the time to my M2070FW printer after update to Windows 10 1803 in USB connection. But when I installed easy document creator the scanner was recognized.

I don't suppose you'd have a fix for mac OS? I tried your option but it's giving me an .exe file which is not compatible with my mac. the scanner is about to go out the window. I've tried everything from setting up wifi, using a new USB cord, restarting both mac and scanner, re-downloading and re-installing drivers and still it will not scan. I can scan with vue scan but I get 'scanner reported an error 'message when using the samsung interface.. no code.. nothing else... I'm guessing it's to do with upgrading to Mojave, but I'm not sure where to go now..

Thanks so much, I really appreciate it! Same as yummyflower, I registered just to let you know how thankful I am! I too, have a Samsung SCX-3405W, and had googled high and low trying to troubleshoot the scanner problem. And just about to give up, I tried your method. It worked! Thanks for sharing! Really appreciate it! Cheers!

EasyScan is an easy to use image and document scanning tool which enables users to scan on many different kinds of printer models from many different brands. EasyScan works by having it automatically detect the kind of scanner you have (i.e. either Ink jet/Warp & HP Laserjet/Pearlbay, or Epson ink jet/Platinum, etc.) and then allowing you to choose the appropriate document/image to be scanned.

EasyScan was developed by Philippe Mignard, a French independent software developer. Mignard had been working with computers since he was a small kid, and through many years of software development, he was able to develop EasyScan into a complete imaging software solution. Philippe has always been keen on open source software and has released many different programs over the years. With EasyScan, he hopes to provide a solution for people who are looking to use an image scanner on a Windows PC but who do not necessarily want to spend hours training for a job, as is often required for a regular job. With EasyScan, the user can simply scan documents and images, and then have the program automatically duplicate them for them on their computer.