Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Download Er Mapper 7.1 Full Version
578 views
Skip to first unread message
Janet Stenstrom
Dec 26, 2023, 12:18:14 PM12/26/23
to
If you want to use an instanced version of the Mapper in Automapper, then I think you can use the MappingEngine class. I believe the static Mapper class instantiates and configures an MappingEngine object to do all of the nitty gritty mapping work.
License of use:
eggNOG data and the eggNOG-mapper tool are open-source and fully free resources for academics. However, any kind of commercial usage requires explicit licensing; please contact info biobyte.de for further information.
Download Er Mapper 7.1 Full Version
Download https://t.co/dfOjR70mSH
If you can send me details for a device on your private instance that is transmitting messages, then I can use that to test, debug and fix the issue. Please send me details like this in private, like on the TTN Slack, or email info ttnmapper.org
- Profile change on button press: you direct RS mapper to change key mappings after pressing (or while holding) the device button. This might be particularly useful for people with simpler joysticks as this doubles options available on single device. Also, you might want to have different setup for combat and different for landing ect. Possibilities are limitless.
I do have profiles for Falcon BMS and K-50 done at least partially. However, I did actually prefer to mix in-game buttons settings with RS mapper, so these profiles are not "complete" - only certain functions on "release" buttons are mapped. I will try to post them when I am back home and log into my flying rig.
unfortunately I have no experience with Xpadder, but description seems pretty similar. RS Mapper does not simulate mouse movements but honestly, that's rather trivial thing to code if it was ever needed. And yes, RS mapper is a freeware app, developed within some 2 or 3 weeks of "free time" in the evenings, not "started over 10 years ago" ;-)
Spreadsheet Mapper is a powerful tool for mapping point locations. It starts with enough spreadsheet rows for 1,000 placemark points, and provides a tool for adding additional rows. Adding more than a few thousand rows/points will slow down the spreadsheet mapper, and produce a very large KML file.
SQLAlchemy features two distinct styles of mapper configuration, which thenfeature further sub-options for how they are set up. The variability in mapperstyles is present to suit a varied list of developer preferences, includingthe degree of abstraction of a user-defined class from how it is to bemapped to relational schema tables and columns, what kinds of class hierarchiesare in use, including whether or not custom metaclass schemes are present,and finally if there are other class-instrumentation approaches present suchas if Python dataclasses are in use simultaneously.
Regardless of what style of mapping used, all ORM mappings as of SQLAlchemy 1.4originate from a single object known as registry, which is aregistry of mapped classes. Using this registry, a set of mapper configurationscan be finalized as a group, and classes within a particular registry may referto each other by name within the configurational process.
With all mapping forms, the mapping of the class can be configured in many waysby passing construction arguments that ultimately become part of the Mapperobject via its constructor. The parameters that are delivered toMapper originate from the given mapping form, includingparameters passed to registry.map_imperatively() for an Imperativemapping, or when using the Declarative system, from a combinationof the table columns, SQL expressions andrelationships being mapped along with that of attributes such as__mapper_args__.
When mapping with the declarative mappingstyle, additional mapper configuration arguments are configured via the__mapper_args__ class attribute. Examples of use are availableat Mapper Configuration Options with Declarative.
For upgrading glass, it needs to be compiled against each version of Sitecore. Kernel and System.Web.Mvc.dll assemblies. To ensure clean upgrade, ensure that all the projects are references with the correct version of Sitecore and re add the glass NuGet packages so that glass mapper refers to correct path. If Project is set up with TDS to regenerate site core models, upgrade to Glass Mapper 5.0.15 will lead to errors and should change in the following Glass Mapper APIs used in the project with Glass Mapper Auto regenerate models feature. These steps are not required if manual glass model mapping is done on solution.
This is a library implementing the Mapper algorithm in Python. KeplerMapper canbe used for visualization of high-dimensional data and 3D point cloud data.KeplerMapper can make use of Scikit-Learn API compatible cluster and scalingalgorithms. You can find the source code on github atscikit-tda/kepler-mapper.
The Device-mapper is a component of the linux kernel (since version 2.6) thatsupports logical volume management. It is required by LVM2 andEVMS. The original LVM (included in stock 2.4 kernels) does not use it.
dm-develis the mailing list for any device-mapper-related questions and discussion.
Subscribe by sending email to dm-devel+subscribe lists.linux.dev.
Unsubscribe by sending email to dm-devel+unsubscribe lists.linux.dev.
The list archives are at -devel/
The mailing list address isdm-devel lists.linux.dev.
Dozer team is happy to announce release 5.2.0. This version fixes fourteen bugs of different kind and provides several new features, such as referencing current mapper object inside a custom converter. Upgrade is recommended for all 5.x.x users.
Are you interested in creating maps that display 2010 Census Population and Housing data for use in reports, presentations, or general viewing? If so, then the Census Data Mapper is an application you should explore. The beta version of the application is now available for use at the following URL: www.census.gov/geo/maps-data/maps/datamapper.html.
Create the docker image on a server which has internet access i.e.
# docker pull nexus3.onap.org:10001/onap/org.onap.dcaegen2.services.pm-mapper:1.2.0
1.2.0: Pulling from onap/org.onap.dcaegen2.services.pm-mapper
Digest: sha256:f6a9349b575d7a62525196fec4f610a773db0ec6ff49be0bc6d0b134fc52a76d
Status: Downloaded newer image for nexus3.onap.org:10001/onap/org.onap.dcaegen2.services.pm-mapper:1.2.0
nexus3.onap.org:10001/onap/org.onap.dcaegen2.services.pm-mapper:1.2.0
# docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
nexus3.onap.org:10001/onap/org.onap.dcaegen2.services.pm-mapper 1.2.0 2bb6a1b426ab 36 minutes ago 101MB
# docker save 2bb6a1b426ab > 1.2.0.mapper.tar
On each of the K8s worker nodes copy the docker image for mapper (and DFC).
i.e.
cd /dockerdata-nfs/onap-dcaegen2/
docker load -i 1.2.0.mapper.tar
docker images
docker tag 06776409bc03 dcaegen2/pmmapper.1.2.0
The mapper version shows 5.1 (Help > About) after patch build_4305 has been installed. The Standards version is now 5.2 after installing the patch 4305. This is confirmed in the Dump_Info. Have the Map Editor fixes been correctly installed?
To enhanced accessibility and reduce the risk of misconfiguration,Connectome Mapper 3 comes with an interactive GUI, aka cmpbidsappmanager,which supports the user in all the steps involved in the configuration ofthe pipelines, the configuration and execution of the BIDS App, andthe control of the output quality. In addition, to facilitate the useby users not familiar with Docker and Singularity containers,Connectome Mapper 3 provides two Python commandline wrappers(connectomemapper3_docker and connectomemapper3_singularity) that willgenerate and run the appropriate command.
With the new --track_carbon_footprint option of the connectomemapper3_docker and connectomemapper3_singularity BIDS App python wrappers, andthe new "Track carbon footprint" option of the BIDS Interface Window of cmpbidsappmanager, you can estimate the carbon footprint incurred by theexecution of the BIDS App. Estimations are conducted using codecarbon to estimate the amount of carbon dioxide (CO2)produced to execute the code by the computing resources and save the results in /code/emissions.csv.
0aad45d008
License of use:
eggNOG data and the eggNOG-mapper tool are open-source and fully free resources for academics. However, any kind of commercial usage requires explicit licensing; please contact info biobyte.de for further information.
Download Er Mapper 7.1 Full Version
Download https://t.co/dfOjR70mSH
If you can send me details for a device on your private instance that is transmitting messages, then I can use that to test, debug and fix the issue. Please send me details like this in private, like on the TTN Slack, or email info ttnmapper.org
- Profile change on button press: you direct RS mapper to change key mappings after pressing (or while holding) the device button. This might be particularly useful for people with simpler joysticks as this doubles options available on single device. Also, you might want to have different setup for combat and different for landing ect. Possibilities are limitless.
I do have profiles for Falcon BMS and K-50 done at least partially. However, I did actually prefer to mix in-game buttons settings with RS mapper, so these profiles are not "complete" - only certain functions on "release" buttons are mapped. I will try to post them when I am back home and log into my flying rig.
unfortunately I have no experience with Xpadder, but description seems pretty similar. RS Mapper does not simulate mouse movements but honestly, that's rather trivial thing to code if it was ever needed. And yes, RS mapper is a freeware app, developed within some 2 or 3 weeks of "free time" in the evenings, not "started over 10 years ago" ;-)
Spreadsheet Mapper is a powerful tool for mapping point locations. It starts with enough spreadsheet rows for 1,000 placemark points, and provides a tool for adding additional rows. Adding more than a few thousand rows/points will slow down the spreadsheet mapper, and produce a very large KML file.
SQLAlchemy features two distinct styles of mapper configuration, which thenfeature further sub-options for how they are set up. The variability in mapperstyles is present to suit a varied list of developer preferences, includingthe degree of abstraction of a user-defined class from how it is to bemapped to relational schema tables and columns, what kinds of class hierarchiesare in use, including whether or not custom metaclass schemes are present,and finally if there are other class-instrumentation approaches present suchas if Python dataclasses are in use simultaneously.
Regardless of what style of mapping used, all ORM mappings as of SQLAlchemy 1.4originate from a single object known as registry, which is aregistry of mapped classes. Using this registry, a set of mapper configurationscan be finalized as a group, and classes within a particular registry may referto each other by name within the configurational process.
With all mapping forms, the mapping of the class can be configured in many waysby passing construction arguments that ultimately become part of the Mapperobject via its constructor. The parameters that are delivered toMapper originate from the given mapping form, includingparameters passed to registry.map_imperatively() for an Imperativemapping, or when using the Declarative system, from a combinationof the table columns, SQL expressions andrelationships being mapped along with that of attributes such as__mapper_args__.
When mapping with the declarative mappingstyle, additional mapper configuration arguments are configured via the__mapper_args__ class attribute. Examples of use are availableat Mapper Configuration Options with Declarative.
For upgrading glass, it needs to be compiled against each version of Sitecore. Kernel and System.Web.Mvc.dll assemblies. To ensure clean upgrade, ensure that all the projects are references with the correct version of Sitecore and re add the glass NuGet packages so that glass mapper refers to correct path. If Project is set up with TDS to regenerate site core models, upgrade to Glass Mapper 5.0.15 will lead to errors and should change in the following Glass Mapper APIs used in the project with Glass Mapper Auto regenerate models feature. These steps are not required if manual glass model mapping is done on solution.
This is a library implementing the Mapper algorithm in Python. KeplerMapper canbe used for visualization of high-dimensional data and 3D point cloud data.KeplerMapper can make use of Scikit-Learn API compatible cluster and scalingalgorithms. You can find the source code on github atscikit-tda/kepler-mapper.
The Device-mapper is a component of the linux kernel (since version 2.6) thatsupports logical volume management. It is required by LVM2 andEVMS. The original LVM (included in stock 2.4 kernels) does not use it.
dm-develis the mailing list for any device-mapper-related questions and discussion.
Subscribe by sending email to dm-devel+subscribe lists.linux.dev.
Unsubscribe by sending email to dm-devel+unsubscribe lists.linux.dev.
The list archives are at -devel/
The mailing list address isdm-devel lists.linux.dev.
Dozer team is happy to announce release 5.2.0. This version fixes fourteen bugs of different kind and provides several new features, such as referencing current mapper object inside a custom converter. Upgrade is recommended for all 5.x.x users.
Are you interested in creating maps that display 2010 Census Population and Housing data for use in reports, presentations, or general viewing? If so, then the Census Data Mapper is an application you should explore. The beta version of the application is now available for use at the following URL: www.census.gov/geo/maps-data/maps/datamapper.html.
Create the docker image on a server which has internet access i.e.
# docker pull nexus3.onap.org:10001/onap/org.onap.dcaegen2.services.pm-mapper:1.2.0
1.2.0: Pulling from onap/org.onap.dcaegen2.services.pm-mapper
Digest: sha256:f6a9349b575d7a62525196fec4f610a773db0ec6ff49be0bc6d0b134fc52a76d
Status: Downloaded newer image for nexus3.onap.org:10001/onap/org.onap.dcaegen2.services.pm-mapper:1.2.0
nexus3.onap.org:10001/onap/org.onap.dcaegen2.services.pm-mapper:1.2.0
# docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
nexus3.onap.org:10001/onap/org.onap.dcaegen2.services.pm-mapper 1.2.0 2bb6a1b426ab 36 minutes ago 101MB
# docker save 2bb6a1b426ab > 1.2.0.mapper.tar
On each of the K8s worker nodes copy the docker image for mapper (and DFC).
i.e.
cd /dockerdata-nfs/onap-dcaegen2/
docker load -i 1.2.0.mapper.tar
docker images
docker tag 06776409bc03 dcaegen2/pmmapper.1.2.0
The mapper version shows 5.1 (Help > About) after patch build_4305 has been installed. The Standards version is now 5.2 after installing the patch 4305. This is confirmed in the Dump_Info. Have the Map Editor fixes been correctly installed?
To enhanced accessibility and reduce the risk of misconfiguration,Connectome Mapper 3 comes with an interactive GUI, aka cmpbidsappmanager,which supports the user in all the steps involved in the configuration ofthe pipelines, the configuration and execution of the BIDS App, andthe control of the output quality. In addition, to facilitate the useby users not familiar with Docker and Singularity containers,Connectome Mapper 3 provides two Python commandline wrappers(connectomemapper3_docker and connectomemapper3_singularity) that willgenerate and run the appropriate command.
With the new --track_carbon_footprint option of the connectomemapper3_docker and connectomemapper3_singularity BIDS App python wrappers, andthe new "Track carbon footprint" option of the BIDS Interface Window of cmpbidsappmanager, you can estimate the carbon footprint incurred by theexecution of the BIDS App. Estimations are conducted using codecarbon to estimate the amount of carbon dioxide (CO2)produced to execute the code by the computing resources and save the results in /code/emissions.csv.
0aad45d008
0 new messages