[gmclist] GMC Motorhome Parts Cross Reference

[Gary Wingerter]

I used to be able to find the site that had a cross reference from old GM part numbers to numbers that have replaced them and by whom, does anyone have the web site address for that list. When you select the cross reference option at the sites that have that option it sends you to a site that is under construction and its a new one to me. The short of it is I am looking for a replacement number for the OEM front calipers.
Gary Wingerter
75 Eleganza
Prescott,Az
To unsubscribe or change your settings - http://www.gmcnet.org/settings.htm
Donate to support GMCnet - http://www.gmcnet.org/support.html

[GARY WINGERTER]

[Billy Massey]

Hi Gary

You are a member of GMCMI. This information is within your 2007
GMCMI Parts Interchange. You should keep it handy for times like this. :-)

The 2008 edition will be coming out very soon. I will have an online
information gathering form available soon for notification of
additions, changes, deletions, etc., ....

Billy
I'm looking for my copy of Richard Groves' gmcmhparts.com web
site. Not having a lot of luck right now though.....

From page 5
Front, Caliper Assembly (LH)
GMC 78Z Parts Book 2621711
4
Item Description Part No. Item Description Part No.
Car Quest (Loaded) 16-4081
Car Quest (Unloaded) 18-4081
EIS 6139
NAPA UP 442-2011
Front, Caliper Assembly (RH)
GMC 78Z Parts Book 2621712
Car Quest (Loaded) 16-4082
Car Quest (Unloaded) 18-4082
EIS 6140
NAPA UP 442-2010
Front, Caliper, Anti Rattle Springs
Car Quest H-5492
Front, Caliper, Left Hand, Remanufactured
GMC 78Z Parts Book 2621711
Golby 439
NAPA - Rebuilt SDC 242-2010
Wagner - Rebuilt CR-80940-L
Wagner - Rebuilt L80941
Front, Caliper, Right Hand, Remanufactured
GMC 78Z Parts Book 2621712
Golby 438
NAPA - Rebuilt SDC 242-2011
Wagner - Rebuilt CR-80941-R
Wagner - Rebuilt R80941
Front, Disk Pads
GMC 78Z Parts Book (Superseded) 5468767
GMC 1154578
Bendix D-52
Bendix (Heavy Duty -- Check for proper fit) D-153
Delco 173-144
Domestic MRD-153
Performance Friction (Carbon Metallic) (Standard Pad) 0524
Performance Friction (Carbon Metallic) (Oversize Pad) 06144
Wagner SX7184
Wagner - Average Service PX-728-AR
Wagner - Better Service MX-728-AR
Wagner - Best Service SX-728-AR
Semi-Metallic (See #18, Page 2) Reference
Front, Disk Pads
Wagner (HD - Semi Metallic - Check for fit) MX-7084-R
Wagner (HD - Carbon Metallic - Check for fit) SX7084
Front, Disk Pads,
Performance Friction (Carbon Metallic) D-154
Front, Disk Pads, Ceramic
NAPA, riveted CMX-728AM
Front, Disk Pads, Organic, 1 yr. warranty
NAPA, riveted TS-728AM
Front, Disk Pads, Semi-Metallic, 2 yr. warranty
NAPA, riveted SS-728AM
Front, Disk Pads, Semi-Metallic, Lifetime
NAPA, riveted UP AE-728AM
Front, Disk Pads, Severe Duty Metallic, Lifetime
NAPA, riveted UP SD-728AM
Front, Piston Repair Kit
GMC 78Z Parts Book 5468767
Delco 173-144
EIS C-1042
NAPA UP 524
Raybestos 5584

At 06:06 PM 3/24/2008, Gary Wingerter wrote:
>I used to be able to find the site that had a cross reference from
>old GM part numbers to numbers that have replaced them and by whom,
>does anyone have the web site address for that list. When you
>select the cross reference option at the sites that have that option
>it sends you to a site that is under construction and its a new one
>to me. The short of it is I am looking for a replacement number for
>the OEM front calipers.
>Gary Wingerter

To unsubscribe or change your settings - http://www.gmcnet.org/settings.htm

[Gary Wingerter]

Billy
Thank you, I forgot about the info in the newsletter, got to use to clicking on the internet. Really appreciate the response, do you know if that internet site is going to come back??

Gary Wingerter
75 Eleganza
Prescott,Az

[GARY WINGERTER]

Billy
Thank you, I forgot about the info in the newsletter, got to use to clicking on the internet. Really appreciate the response, do you know if that internet site is going to come back??

[Ken Burton]

You can get rotors from Cinnabar for big bucks or from JIM K. for less bucks. I'll bet Jim Bounds also has them. The rotors are not a common auto parts store item.
--
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

[Billy Massey]

At 08:51 PM 3/24/2008, Gary Wingerter wrote:
>do you know if that internet site is going to come back??

I doubt it. It's creator lost interest rather quickly. I have an
inquiry in to his last know address about it. If I can find the
files, I'll put it up on bdub.net and try to make it interactive.

bdub

[Billy Massey]

Much Thanks to Charles Boyd for coming to our rescue. He had copied
and saved Richard's web site and actually knew where he'd put it
(which is more than I can say for myself).

Dick Groves' old www.gmcmhparts.com is now resting comfortably at
www.bdub.net/gmcmhparts/.

Now, if anyone knows a simple (or not) way to make this page
interactive, please let me know. It really needs to be where anyone
can add part numbers to it when they come up with them.

Thanks from all of us, Chuck.
bdub

At 08:51 PM 3/24/2008, Gary Wingerter wrote:
>do you know if that internet site is going to come back??

[Rob Mueller]

G'day,

I got one rotor from Jim B for $95.00 on March 1st. I got a second rotor
from Cinnabar for $96.60 on March 14th. Jim K has them listed for $80.00.

Be advised they're listed under Front Suspension & Steering.

http://www.appliedgmc.com/frtsuspension.html

Don't ask me why not under Brakes; maybe because he's Ornamental!

Now you're wonderin'; hmmm? why didn't he get two from Jim B in the first
place? The reason is when you see huge gouges on the outboard face of one
disk you should check the inboard face of the other disk if the outboard
face is good! DUH!!!

Regards,
Rob Mueller
Sydney, Australia
75 - Avion - AUS - The Blue Streak
75 - Avion - USA - Double Trouble

[Steven Ferguson]

I was able to find a wide variety just by selecting 1976 Toronado. Same pads.

On Mon, Mar 24, 2008 at 4:06 PM, Gary Wingerter <garl...@msn.com> wrote:
> I used to be able to find the site that had a cross reference from old GM part numbers to numbers that have replaced them and by whom, does anyone have the web site address for that list. When you select the cross reference option at the sites that have that option it sends you to a site that is under construction and its a new one to me. The short of it is I am looking for a replacement number for the OEM front calipers.

> Gary Wingerter
> 75 Eleganza
> Prescott,Az

> To unsubscribe or change your settings - http://www.gmcnet.org/settings.htm
> Donate to support GMCnet - http://www.gmcnet.org/support.html
>

--
Steve Ferguson
'76 EII
Sierra Vista, AZ
Urethane bushing source
www.bdub.net/ferguson/

[John Chalinder]

I was going to offer to scan from my copy of the crossref book that I got with
my rig. But, I see you're in good hands with the advice already given. And,
I've learned something in the process of reading the other responses.

John Chalinder
TZE033V100250 Starchild
1973 23' Transmode w/Glacier color scheme
(Little did I know at the time of purchace that I would come to live just 30
miles from the West entrance to Glacier NP)

On Mon, 24 Mar 2008 23:06:40 -0000

[Shawn Bennear]

I was thinking of trying to put a universal parts reference guide on my site as well, but I dont know who to see to get permission...

shawn
--
1973 23' GMC Custom
2003 Pt Cruiser, Tangerine Edition DC2
1995 GMC Yukon (Jeremeys)

My GMC Website is up!

http://www.gmcmotorhomeworld.com

[Richard]

svbusdriver wrote on Tue, 25 March 2008 16&#58;06

> I was thinking of trying to put a universal parts reference guide on my site as well, but I dont know who to see to get permission...
>
> shawn

This would be a great idea!

I have been going round and round looking for proper
part numbers.

Any idea what the # is for the blower fan speed switch
on a '77 Palm Beach dash air?

Thanks,

--
Bukzin
1977 Palm Beach
Chico California