carb hat, air cleaner adapter

11 views
Skip to first unread message

Eric Schmidt

unread,
Dec 9, 2024, 7:34:07 PM12/9/24
to GMCMH EFI
When I first installed my system, I used a stock air cleaner manually modified to fit. I wasn't too pleased with the Spectre adapter, nor the stock Jeep adapters, so I kept looking. I finally found one made by TorqStorm. The price was right, and it fits perfectly. No spacer needed, no clearance issues anywhere yet, and it fits under the hatch! It takes a 4" hose, but that is easily dealt with. I am in the process of swapping out the Holley TB with a Rochester TB, so more to come.

gbec...@graestone.org

unread,
Dec 10, 2024, 8:17:26 AM12/10/24
to EFI GoogleList
Eric, 

Can yoiu please give us a link to the TorqStorm carb adaptor to a 4” hose? I find one on their site for $175, and one for $300. Perhaps your idea of “price is right” is different than mine? *grin*

Thanks.

On Dec 9, 2024, at 4:34 PM, Eric Schmidt <jjjmi...@gmail.com> wrote:

When I first installed my system, I used a stock air cleaner manually modified to fit. I wasn't too pleased with the Spectre adapter, nor the stock Jeep adapters, so I kept looking. I finally found one made by TorqStorm. The price was right, and it fits perfectly. No spacer needed, no clearance issues anywhere yet, and it fits under the hatch! It takes a 4" hose, but that is easily dealt with. I am in the process of swapping out the Holley TB with a Rochester TB, so more to come.

--
You received this message because you are subscribed to the Google Groups "GMCMH EFI" group.
To unsubscribe from this group and stop receiving emails from it, send an email to gmcmh-efi+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/gmcmh-efi/886619c5-bcb7-4bf3-9a55-8b028762f684n%40googlegroups.com.

---------
Best Wishes,


Eric S.

unread,
Dec 10, 2024, 11:45:51 AM12/10/24
to gmcm...@googlegroups.com
Here you go...

BTW, the$300 choice includes all the silicone hoses to fit their blower system. 

You received this message because you are subscribed to a topic in the Google Groups "GMCMH EFI" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/gmcmh-efi/zAqV5puZtEI/unsubscribe.
To unsubscribe from this group and all its topics, send an email to gmcmh-efi+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/gmcmh-efi/AD5BC314-05D0-470E-A3D9-2E1D882494C6%40graestone.org.

gbec...@graestone.org

unread,
Dec 10, 2024, 7:15:56 PM12/10/24
to EFI GoogleList
Thanks/


On Dec 10, 2024, at 8:45 AM, Eric S. <jjjmi...@gmail.com> wrote:

Here you go...

BTW, the$300 choice includes all the silicone hoses to fit their blower system. 

Keith V

unread,
Dec 11, 2024, 9:32:37 AM12/11/24
to EFI GoogleList
I do like that hat, but the inlet is weird, how do you adapt a hose to it?
For $300 you get a blow off valve adapter, which is useless, the elbow adapter is only $50, but there's no straight adapter which is what I'd need

From: gmcm...@googlegroups.com <gmcm...@googlegroups.com> on behalf of gbec...@graestone.org <gbec...@graestone.org>
Sent: Tuesday, December 10, 2024 6:15 PM
To: EFI GoogleList <gmcm...@googlegroups.com>
Subject: Re: [GMCMH-EFI] carb hat, air cleaner adapter
 
--
You received this message because you are subscribed to the Google Groups "GMCMH EFI" group.
To unsubscribe from this group and stop receiving emails from it, send an email to gmcmh-efi+...@googlegroups.com.

Eric S

unread,
Dec 11, 2024, 9:32:35 PM12/11/24
to gmcm...@googlegroups.com

After doing some measuring, it appears that a 3 1/2" (89 mm) hose should go over the snorkel. I saw that the hat came with a 4" clamp, so I assumed it would take a 4" hose. Ooops. I am thinking that a 3 1/2" duct, like silicone brake cooling duct, will fit with a little persuasion. I will source something cheap, like dryer duct, to test for fit etc. Pegasus Racing stocks lots of hose adapters, tubing, etc.

You received this message because you are subscribed to a topic in the Google Groups "GMCMH EFI" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/gmcmh-efi/zAqV5puZtEI/unsubscribe.
To unsubscribe from this group and all its topics, send an email to gmcmh-efi+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/gmcmh-efi/LV8P223MB11477BE247AC5E7D6BC099E8A43E2%40LV8P223MB1147.NAMP223.PROD.OUTLOOK.COM.

Dave Stragand

unread,
Dec 12, 2024, 9:17:24 PM12/12/24
to GMCMH EFI
Is this the one?


-Dave
Low profile carburetor hat for single supercharger systems. The new hat measures just under 8-inches in diameter with a height of only 3.25-inches. Perfect for low hood clearance situations.


From: gmcm...@googlegroups.com <gmcm...@googlegroups.com> on behalf of Eric Schmidt <jjjmi...@gmail.com>
Sent: Monday, December 9, 2024 7:34 PM
To: GMCMH EFI <gmcm...@googlegroups.com>
Subject: [GMCMH-EFI] carb hat, air cleaner adapter
 
When I first installed my system, I used a stock air cleaner manually modified to fit. I wasn't too pleased with the Spectre adapter, nor the stock Jeep adapters, so I kept looking. I finally found one made by TorqStorm. The price was right, and it fits perfectly. No spacer needed, no clearance issues anywhere yet, and it fits under the hatch! It takes a 4" hose, but that is easily dealt with. I am in the process of swapping out the Holley TB with a Rochester TB, so more to come.

--
You received this message because you are subscribed to the Google Groups "GMCMH EFI" group.
To unsubscribe from this group and stop receiving emails from it, send an email to gmcmh-efi+...@googlegroups.com.
Reply all
Reply to author
Forward
0 new messages