Carb, or EFI Systems
The filter above. Is a 2 micron carb filter from what I understand . Was installed 5 weeks ago in a Qjet. The adhesive that held the steel ends on. Came loss. Then contaminated the carb. So why did that filter come apart? Could this same thing happen to
an EFI filter?
Next. If a Qjet required a 2 micron filter according to GM. What does my GM, 454 TB require that I have. I have in line filters just before my two 13 LBS. EFI pumps at the rear now. Most small in line filters seem to be 20 micro. As I see it. Isn't my in
line filters just sorting out the big rocks? Shouldn't I have a smaller micron filters to protect my EFI pumps, and TB? Are some of the EFI pump issues. Because our pumps aren't properly protected? Does that GM TB have a filter/screen? I think of our 78
Royale. Like Apollo 13. Failure IS NOT an option. Been that way for 16 years. Never been towed. YET.
This might be of interest to those on the GMC net. Maybe someone could post this there. I'm monitored by Billie M.
Bob Dunahugh