Headlining

[Peter Draycott]

When you search google for gk24 headlining, an old post comes up but I can’t see how to access it, any ideas?!

Thanks

Pete

 

Peter J Draycott  DipSurv ABEng
Draycott Chartered Surveyors
tel: +44 1590 673282
fax: +44 1590 671701
e-mail: pe...@draycotts.co.uk
www: http://www.draycotts.co.uk
======================================================================

This email is confidential and may also be privileged.  If you are not the intended recipient please notify us immediately by telephoning +44 (1590) 673282. You should not copy it or use it for any purpose nor disclose its contents to any other person.

======================================================================

 

[Simon K]

I think the old headlining post was located on the, now defunct,
gk24.org website. I thought that all the topics had been transferred
to this gk24 google groups site, but it doesn't look like they all
have. Hopefully somebody has a copy of that post & can put it here.

Regards

Simon

On Feb 27, 3:35 pm, "Peter Draycott" <Pe...@draycotts.co.uk> wrote:
> When you search google for gk24 headlining, an old post comes up but I
> can't see how to access it, any ideas?!
>
> Thanks
>
> Pete
>
> Peter J Draycott  DipSurv ABEng
> Draycott Chartered Surveyors
> tel: +44 1590 673282
> fax: +44 1590 671701

> e-mail: pe...@draycotts.co.uk <mailto:pe...@draycotts.co.uk>
> www:http://www.draycotts.co.uk<http://www.draycotts.co.uk/>

[Nickolas Davies]

i would like to second the request for any such article, or any advice as i would like to renew lots of my dream boat, and on the list is headlining so any advice would be grate
thanks

nick

[Peter Draycott]

Re: Headlining

 

I would strongly recommend removing the deck fittings and re-bedding them with new back plates. As mine (ply) were all rotted out and leaked. A couple of rainy afternoons with a marker pen soon identified them all! That was last winters job now headlining is due before the start of the season.

 

Good Luck

Pete

--
You received this message because you are subscribed to the Google Groups "GK24" group.
To unsubscribe from this group and stop receiving emails from it, send an email to gk24+uns...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

---

This email is confidential and may also be privileged. If you are not the intended recipient please notify us immediately by telephoning +44 (1590) 673282. You should not copy it or use it for any purpose nor disclose its contents to any other person.

[Nickolas Davies]

sure thats always a good idear, i think this time around thay will be all fiberglass with a nice even taper to spred the load, also thease eliminates it from further reapir work in the future (rotting related or damp)

thanks for the tip

[Nickolas Davies]

ok I have finally gave up on the idea of the head ling as my one is now out and after seeing all that mess and the fact it hides falling fittings its just not worth it

I have to now rebeded most fittings and my check stays will require the balsa core removed and replaced with grp