Project X Lz Ei Profile
Emigdio Binet
The Eagle Project is part of RTD's FasTracks initiative, a voter-approved program to expand rail and bus transit throughout the Denver metropolitan region. FasTracks includes 122 miles of commuter rail and light rail, 18 miles of bus rapid transit service, the redevelopment of Denver Union Station (DUS), 21,000 new parking spaces, and other improvements.
The Eagle Project has been procured through a concession agreement between RTD and Denver Transit Partners to design, build, finance, operate, and maintain the project's components for 34 years. RTD retains ownership of all assets at all times, set fares and fare policies, and keeps all project revenues. RTD is making availability payments to the concessionaire based on established performance metrics.
The TIFIA loan is secured by a senior lien gross revenue pledge of RTD's 0.4 percent sales tax revenues and a subordinate lien pledge of RTD's 0.6 percent sales tax revenues. The 0.4 percent sales tax may only be used to construct and operate the FasTracks mass transit system. The TIFIA lien is on parity with RTD's existing FasTracks senior revenue bonds.
I am building out a Archive in control center to archive projects once they are complete. As a part of the process, I want to update the Project Profile data to update a sheet showing that the project is Archived. I have added a column to the intake sheet and the Summary sheet. In the Archive workflow, I see Update Project Profile Data, but I do not see those columns in the dropdown. What sheet needs to have the Project Archived field to be updated through the Update Profile Data filed in the Archive tool of Control Center.
I opened a support ticket, but I can't close this pop-up no matter what I click or what browser I use and I'm wondering if anyone has any insight. I'm LOCKED OUT of my work because of some stupid UI refresh alert. ?
The project expanded the Springs Rescue Mission Campus as the designated location for unaccompanied adults experiencing homelessness from 4.5 to 8.7 acres, developing adjacent, blighted land as well as the commercial properties intermixed with its previous facilities.
As part of the response to the 2011 tornado that struck Joplin, MO, the City partnered with the State of Missouri to leverage CDBG-DR funds to construct a state of the art 38,000 square foot early childhood center. The center provides half-day educational services to special needs and disadvantaged three- to five-year olds and can accommodate approximately 400 children.
In 2016, the Renaissance Community Co-op opened a 10,000 square foot grocery store in one of Greensboro's food deserts. The new store is community-owned and democratically controlled by its members, the majority of whom live in the surrounding community. The store stocks healthy foods at affordable prices with a commitment to locally sourced products.
A new Community Integrated Living Arrangement (CILA) group home for six extremely low-income adults with severe intellectual and developmental disabilities. Residents of this group home receive much-needed housing as well as life skills training, enabling them to achieve their potential, advance their independence and participate as full members of the community.
A set of new and enhanced CDBG and CDBG-CV Project Profile pages are under development and will be launched soon! They will feature a new landing page and project pages with vibrant and colorful images and graphics. Stay tuned for more information.
Hello I'm trying to extrude a font from a surface. First using a sketch, adding the text, lining it up over-head where I want it and negatively extrude from surface. But when I go to perform the extrusion I am encountered with this error. I changed around a few setting and it turns out that it doesn't like this font, which is unfortunate because this is a very specific font.
If you're trying to make a join: I think the issue is that the surface you are trying to extrude from is a curved, sculpted surface. I would either project the silhouette to a lower plane and then extrude into the key cap, or you can use the patch tools to divide up the face and thicken the Q at the top.
So I tried it with a different font, and that didn't work. So I exploded the text for Arial font. It would let me extrude the hole in a capital "A" from the surface but would not let me extrude just the letter. I had to extrude both the letter and hole the extrude in the other direction the hole.
SO then I tried it with my font. Gotham Rounded Light. It cannot explode the text. Something about it, it just doesn't like the text. I tried installing both OpenType and True type of that font to no avail.
The table below lists projects currently receiving construction grant payouts or those seeking CIG funding that may receive a construction grant in the future. The project profiles provide a description of each project and other available information. Project profiles on this webpage are updated only when a project reaches a milestone, or when a project has received a project rating (as outlined in the Final Interim Policy Guidance), therefore, information shown in the corresponding project profile may not match the information contained in the CIG Dashboard.
The information below reflects the status of projects during development of the Fiscal Year 2023 Annual Report on Funding Recommendations. As projects advance through the process, updated profiles will be posted on the Current Projects page.
The Miami-Dade County Department of Transportation and Public Works (DTPW) proposes to implement commuter rail service along the existing Florida East Coast Railway rail line between Downtown Miami and the City of Aventura in northeast Miami-Dade County. DTPW plans to implement the service with five stations and improvements to the existing rail infrastructure. The project is planned to include Park-and-Ride facilities, a vehicle maintenance facility, and the purchase of rolling stock.
Profile data populates as a summary at the top of each project sheet. It can also be displayed on the Project Dashboard, providing a quick project overview. You can even link profile data to the Blueprint Summary or to portfolio-level dashboards.
If the value is filled in when the project is created, it's identified as Intake profile data in the blueprint builder. The Intake profile data is configured with rules on where the data comes from, either manually entered by the Project Creator in the Create Project wizard or automatically filled in with data or a cell link from an intake sheet.
When you add profile data in the blueprint builder, it appears in your sheets at the end of the summary section. When you update the source template through the blueprint builder, only new projects have the additional profile data and current projects don't change.
The Santa Clara Valley Transportation Authority (VTA) plans to extend the Bay Area Rapid Transit District (BART) Silicon Valley service from the Berryessa Station through downtown San Jose to the City of Santa Clara. The project includes five miles of subway tunnels, 48 heavy rail vehicles, two mid-tunnel ventilation and egress facilities, and a storage yard and maintenance facility. The project is being designed and constructed by VTA, will be owned by VTA, and operated and maintained by BART.
Dear Gurus Please guide me one of my problem need to be solved. Our user created one project definition through CJ20N for one of the companies project profile in control data tab for Project Definition create. We have 4 different project profile for 4 different companies. Unfortunately, user selected wrong project profile for project definition while create the project in our SAP system and saved. We did not assign any cost or network in this project definition because we know that will not allow any changes. User try to change this project profile to another profile but system not allowed ( already gray on that field ) He can change all other field through mass change process except this project profile in control data tab. How can we change this project definition profile in control data tab without deletion of this project. We know we can delete this project and create again with same number, but we are trying to change this field without deleting. Could any one tell me any solution to change the project profile in project definition control data tab. Consider this matter in urgent basis please. Best regards ppnath
Dear ppnath
you cannot change project profile but you can solve your problem by copying
the project and at time of copying assign required project profile and then
deleting the unrequired project.after that rename the newly created project
with that of the deleted one.
Our user created one project definition through CJ20N for one of the
companies project profile in control data tab for Project Definition
create.
We have 4 different project profile for 4 different companies.
Unfortunately, user selected wrong project profile for project
definition while create the project in our SAP system and saved.
We did not assign any cost or network in this project definition because
we know that will not allow any changes.
User try to change this project profile to another profile but system
not allowed ( already gray on that field )
He can change all other field through mass change process except this
project profile in control data tab.
How can we change this project definition profile in control data tab
without deletion of this project.
We know we can delete this project and create again with same number,
but we are trying to change this field without deleting.
Dear ppnath,
As far as I know, Its not possible to change the project profile in the
project def control tab once the project is saved. Only option is to
delete the project created with wrong profile in the control tab, and
create a new project with required project profile in the project def
control tab.