Analog inputs not responding after updating build.

[John Arkless]

Hi folks

I've updated the GEVCU to build #5220 which is the Master branch at Collin80/GEVCU.

My original build number is 1060 which was pre-loaded with the GEVCU6.

My problem is with the throttle and brake analog inputs which don't seem to respond when viewing the log. I've confirmed that the voltages at the pins on these inputs are indeed varying with the throttle/brake levels.

Does anyone have any pointers?

Kind regards

John

[John Arkless]

Solved this by using the latest software version as linked in the EVTV website. Some issue with the serial comms in the Collin80 version maybe...

--
You received this message because you are subscribed to a topic in the Google Groups "GEVCU-Development" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/gevcu-development/nokzRU9s__E/unsubscribe.
To unsubscribe from this group and all its topics, send an email to gevcu-developm...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/gevcu-development/7d1b0731-7a6e-4bad-9f49-4e652cf72c94n%40googlegroups.com.