Grupos
Iniciar sesión
Grupos
GEOtopDev
Conversaciones
Acerca de
Enviar comentarios
Ayuda
GEOtopDev
Comunicarse con los propietarios y los administradores
1–30 de 121
Marcar todas como leídas
Denunciar grupo
0 filas seleccionadas
Christophe Kinnard
,
Matteo Dall'Amico
3
4/10/2023
Adjusting surface elevation (DEM) for snow height?
yes, thanks a lot. It would be great to add an option to adjust the DEM to allow filling of
no leída,
Adjusting surface elevation (DEM) for snow height?
yes, thanks a lot. It would be great to add an option to adjust the DEM to allow filling of
4/10/2023
Christophe Kinnard
7/3/2023
Looking for Stefano!
Dear all, I am working on a publication using the Geotop model, and I am looking to contact Stefano
no leída,
Looking for Stefano!
Dear all, I am working on a publication using the Geotop model, and I am looking to contact Stefano
7/3/2023
Emanuele Cordano
,
zege...@gmail.com
2
3/11/2022
geotop:cnt:1 res:0.0172303 lambda:1 Dt:18 P:0 ?
Dear Emanuele, I just came across this question. If you are compiling with meson, you need to change
no leída,
geotop:cnt:1 res:0.0172303 lambda:1 Dt:18 P:0 ?
Dear Emanuele, I just came across this question. If you are compiling with meson, you need to change
3/11/2022
leixiaoqin
19/7/2021
GEOTOP 3.0 compile error with cmake
Dear GEOtop developers, I am beginner of GEOtop, and try to install GEOtop on Ubuntu 16.04. After
no leída,
GEOTOP 3.0 compile error with cmake
Dear GEOtop developers, I am beginner of GEOtop, and try to install GEOtop on Ubuntu 16.04. After
19/7/2021
Hadi Mohammadzadeh khani
2/6/2021
Error:: Number too high
Hello everyone We are trying to run the model at hourly intervals over 15 years which the number of
no leída,
Error:: Number too high
Hello everyone We are trying to run the model at hourly intervals over 15 years which the number of
2/6/2021
Christophe Kinnard
, …
Emanuele Cordano
4
10/5/2021
CurvaturesMapFile
Hello Both, Thanks for your inputs. I confirm that Geotop writes four curvature maps to the input
no leída,
CurvaturesMapFile
Hello Both, Thanks for your inputs. I confirm that Geotop writes four curvature maps to the input
10/5/2021
Giacomo Bertoldi
4/5/2021
Seminar GEOtop calibration tools - Tuesday, 04. May 2021 16:00-17:00
Hi all, I invite yo all on the today seminar. "Calibration of the GEOtop model using
no leída,
Seminar GEOtop calibration tools - Tuesday, 04. May 2021 16:00-17:00
Hi all, I invite yo all on the today seminar. "Calibration of the GEOtop model using
4/5/2021
Hadi Mohammadzadeh khani
15/4/2021
Air pressure
Dear GEOtop developers, I have a question regarding using air pressure as the model input. I used the
no leída,
Air pressure
Dear GEOtop developers, I have a question regarding using air pressure as the model input. I used the
15/4/2021
Mohsen Soltani
,
yako...@gmail.com
3
17/3/2021
GEOtop 2.1 install on centOS7 -- compile error in cmake
Hi Giacomo, Thank you very much for the reply. I did successfully compiled the GEOtop V3.0 using
no leída,
GEOtop 2.1 install on centOS7 -- compile error in cmake
Hi Giacomo, Thank you very much for the reply. I did successfully compiled the GEOtop V3.0 using
17/3/2021
Hadi Mohammadzadeh khani
,
Giacomo Bertoldi
2
23/11/2020
BlowingSnow does not work
Dear Hadi, unfortunately the blowing snow feature in GEOtop has been never fully developed and tested
no leída,
BlowingSnow does not work
Dear Hadi, unfortunately the blowing snow feature in GEOtop has been never fully developed and tested
23/11/2020
Emanuele Cordano
23/9/2020
Re: *** stack smashing detected ***: <unknown> terminated afrer Re: Eg no value bare soil 375 70
geotop:Soil water evaporates from the first 2 layers geotop:Soil water transpires from the first 7
no leída,
Re: *** stack smashing detected ***: <unknown> terminated afrer Re: Eg no value bare soil 375 70
geotop:Soil water evaporates from the first 2 layers geotop:Soil water transpires from the first 7
23/9/2020
Emanuele Cordano
2
3/9/2020
Clusius-Clapeyron
Thanks Giacomo, this is the code on which I'm working : https://github.com/ecor/geotop/tree/v3.0
no leída,
Clusius-Clapeyron
Thanks Giacomo, this is the code on which I'm working : https://github.com/ecor/geotop/tree/v3.0
3/9/2020
Emanuele Cordano
,
Giacomo Bertoldi
2
9/4/2020
Wind direction?
Emanuele, for what i know, wind direction is not mandatory. You can skip it. Best, Giacomo On Fri,
no leída,
Wind direction?
Emanuele, for what i know, wind direction is not mandatory. You can skip it. Best, Giacomo On Fri,
9/4/2020
Emanuele Cordano
,
Elisa Bortoli
4
23/2/2020
GEOtop 3.0 some tests failed
You are welcome! Thanks @Emanuele Cordano for spotting the missing infos in the README and thanks @
no leída,
GEOtop 3.0 some tests failed
You are welcome! Thanks @Emanuele Cordano for spotting the missing infos in the README and thanks @
23/2/2020
Emanuele Cordano
10/12/2019
Re: Digest for geotopdev@googlegroups.com - 1 update in 1 topic
Dear Stefano, welcome on board. I'm Emanuele Cordano. Actually I'm the maintainer and owner
no leída,
Re: Digest for geotopdev@googlegroups.com - 1 update in 1 topic
Dear Stefano, welcome on board. I'm Emanuele Cordano. Actually I'm the maintainer and owner
10/12/2019
Stefano Campanella
4/12/2019
Ideas on GEOtop development (MHPC thesis). Feedback request.
Hi GEOtoppers! My name is Stefano Campanella and I am the new MHPC student which will work on GEOtop.
no leída,
Ideas on GEOtop development (MHPC thesis). Feedback request.
Hi GEOtoppers! My name is Stefano Campanella and I am the new MHPC student which will work on GEOtop.
4/12/2019
Francesco Serafin
, …
Giacomo Bertoldi
15
4/9/2019
GEOtop available on Docker
---------- Forwarded message --------- From: Palma Martin <Martin...@eurac.edu> Date: Wed,
no leída,
GEOtop available on Docker
---------- Forwarded message --------- From: Palma Martin <Martin...@eurac.edu> Date: Wed,
4/9/2019
Giacomo Bertoldi
12/4/2019
Documentation GEOtop - good pratices.
Dear all, at EGU we discussed about the future of GEOtop, and again and again comes the need of a
no leída,
Documentation GEOtop - good pratices.
Dear all, at EGU we discussed about the future of GEOtop, and again and again comes the need of a
12/4/2019
elisab...@gmail.com
, …
Emanuele Cordano
4
23/1/2019
New 3.0 GEOtop version
Thank you Giacomo, in your document the state-of-art referes to August 2012, should it be updated?
no leída,
New 3.0 GEOtop version
Thank you Giacomo, in your document the state-of-art referes to August 2012, should it be updated?
23/1/2019
Giacomo Bertoldi
, …
elisab...@gmail.com
8
8/1/2019
Fwd: Bug on Pressure output GEOtop version 2.0
The point is that also a part of the source code of se27xx should be changed since we found a bug.
no leída,
Fwd: Bug on Pressure output GEOtop version 2.0
The point is that also a part of the source code of se27xx should be changed since we found a bug.
8/1/2019
Giacomo Bertoldi
17/9/2018
Recent presentations on GEOtop developments.
Dear GEOtoppers, I share some recent presentations on GEOtop development with reference to Elisa
no leída,
Recent presentations on GEOtop developments.
Dear GEOtoppers, I share some recent presentations on GEOtop development with reference to Elisa
17/9/2018
Emanuele Cordano
8/8/2018
Re: GEOtop tip: how to recover simulation or spin up a simulation with GEOtop
Dear all, I think that sipin-up and model engine must be different things and should be separated.
no leída,
Re: GEOtop tip: how to recover simulation or spin up a simulation with GEOtop
Dear all, I think that sipin-up and model engine must be different things and should be separated.
8/8/2018
Giacomo Bertoldi
31/7/2018
Update GEOtop documentation.
Dear all, I´ve added some basic GEOtop documentation here: https://github.com/geotopmodel/geotop/blob
no leída,
Update GEOtop documentation.
Dear all, I´ve added some basic GEOtop documentation here: https://github.com/geotopmodel/geotop/blob
31/7/2018
chris scheidl
8/6/2018
GEOtopTRIEST_release MeteoIO Cannot find plugin ARC as requested
Dear all! We are actually installing GEOtop on the Vienna Scientific Cluster - a high performance
no leída,
GEOtopTRIEST_release MeteoIO Cannot find plugin ARC as requested
Dear all! We are actually installing GEOtop on the Vienna Scientific Cluster - a high performance
8/6/2018
elisab...@gmail.com
, …
Giacomo Bertoldi
3
3/5/2018
Libraries for the solution of linear system in GEOtop
Hi all, you need to see ...\master\geotop\src\gt_utilities\math_utils.cc the function tridiag solves
no leída,
Libraries for the solution of linear system in GEOtop
Hi all, you need to see ...\master\geotop\src\gt_utilities\math_utils.cc the function tridiag solves
3/5/2018
riccardo rigon
16/1/2018
A New paper made with GEOtop
The nice thing is that it does not derive from the GEOtop developers. Does someone has access to the
no leída,
A New paper made with GEOtop
The nice thing is that it does not derive from the GEOtop developers. Does someone has access to the
16/1/2018
chris scheidl
,
Senoner Samuel
3
21/12/2017
GeoTop 2.1 and latest MeteoIO release?
Samuel!! Many thanx! I just wanted to be sure!! Still far away from being able to patch GeoTop onto
no leída,
GeoTop 2.1 and latest MeteoIO release?
Samuel!! Many thanx! I just wanted to be sure!! Still far away from being able to patch GeoTop onto
21/12/2017
Emanuele Cordano
,
Senoner Samuel
9
18/8/2017
onepoint_hydrostatic example
Thank you Samuel for the suggestions. I put the settings LapseRatePrec=0 SnowCorrFactor=1 in
no leída,
onepoint_hydrostatic example
Thank you Samuel for the suggestions. I put the settings LapseRatePrec=0 SnowCorrFactor=1 in
18/8/2017
Emanuele Cordano
,
Senoner Samuel
4
18/8/2017
geotop installation
Hi Emanuele, Try to re-compile the version with METEOIO-ON again, it seems you moved or renamed some
no leída,
geotop installation
Hi Emanuele, Try to re-compile the version with METEOIO-ON again, it seems you moved or renamed some
18/8/2017
Giacomo Bertoldi
8/8/2017
Update link
Dear all, I was looking to this model´repository: http://csdms.colorado.edu/wiki/Hydrological_Models
no leída,
Update link
Dear all, I was looking to this model´repository: http://csdms.colorado.edu/wiki/Hydrological_Models
8/8/2017