Wrong version of ducati firmware?
56 vistas
Ir al primer mensaje no leído
Daniel Berlin
23 oct 2012, 11:44:55 a.m.23/10/12
para geexbo...@googlegroups.com,toml...@openbricks.org
Hey, it looks to me that with the last few pushes, the ducati firmware
being grabbed is now out of date for the plugin/kernel.
This is as of yesterday around noon, when i last kicked off the build.
I did verify the kernel is reporting the firmware was loaded, iva was
started and respoinding to rpc/dce pings.
However,trying to use the gst-ducati decoder gives a dce error of
"could not get plugin base: -22".
I then grabbed the latest firmware from the ti-omap ppa package
(ti-firmware-ipu-dce), overwote the ducati firmware in /lib/firmware,
rebooted, and that made things happy again.
being grabbed is now out of date for the plugin/kernel.
This is as of yesterday around noon, when i last kicked off the build.
I did verify the kernel is reporting the firmware was loaded, iva was
started and respoinding to rpc/dce pings.
However,trying to use the gst-ducati decoder gives a dce error of
"could not get plugin base: -22".
I then grabbed the latest firmware from the ti-omap ppa package
(ti-firmware-ipu-dce), overwote the ducati firmware in /lib/firmware,
rebooted, and that made things happy again.
Thomas Genty
23 oct 2012, 3:10:40 p.m.23/10/12
para geexbo...@googlegroups.com
Le 23/10/2012 17:44, Daniel Berlin a �crit :
thanks for the info.
Tom
> Hey, it looks to me that with the last few pushes, the ducati firmware
> being grabbed is now out of date for the plugin/kernel.
>
> This is as of yesterday around noon, when i last kicked off the build.
>
> I did verify the kernel is reporting the firmware was loaded, iva was
> started and respoinding to rpc/dce pings.
> However,trying to use the gst-ducati decoder gives a dce error of
> "could not get plugin base: -22".
ok, i will check this, maybe a problem with our symlinks
> being grabbed is now out of date for the plugin/kernel.
>
> This is as of yesterday around noon, when i last kicked off the build.
>
> I did verify the kernel is reporting the firmware was loaded, iva was
> started and respoinding to rpc/dce pings.
> However,trying to use the gst-ducati decoder gives a dce error of
> "could not get plugin base: -22".
thanks for the info.
>
> I then grabbed the latest firmware from the ti-omap ppa package
> (ti-firmware-ipu-dce), overwote the ducati firmware in /lib/firmware,
> rebooted, and that made things happy again.
No problem decoding a video ? , that's a good news
> I then grabbed the latest firmware from the ti-omap ppa package
> (ti-firmware-ipu-dce), overwote the ducati firmware in /lib/firmware,
> rebooted, and that made things happy again.
Tom
Daniel Berlin
23 oct 2012, 3:58:17 p.m.23/10/12
para geexbo...@googlegroups.com
On Tue, Oct 23, 2012 at 3:10 PM, Thomas Genty <toml...@gmail.com> wrote:
3122302 ducati-dce-sysm3.xem3
The one from the ti-firmware-ipu-dce PPA is:
3618829 ti-firmware-ipu-dce.xem3
This was from a clean build yesterday.
>
>>
>> I then grabbed the latest firmware from the ti-omap ppa package
>> (ti-firmware-ipu-dce), overwote the ducati firmware in /lib/firmware,
>> rebooted, and that made things happy again.
>
> No problem decoding a video ? , that's a good news
I decoded an xbmctest.mkv that was h264 + DTS 50 times in a loop
(mainly to check for leaks/etc), with no issues, even if i ctrl-c'd it
in the middle/etc.
>
> Tom
> Le 23/10/2012 17:44, Daniel Berlin a écrit :
>
>> Hey, it looks to me that with the last few pushes, the ducati firmware
>> being grabbed is now out of date for the plugin/kernel.
>>
>> This is as of yesterday around noon, when i last kicked off the build.
>>
>> I did verify the kernel is reporting the firmware was loaded, iva was
>> started and respoinding to rpc/dce pings.
>> However,trying to use the gst-ducati decoder gives a dce error of
>> "could not get plugin base: -22".
>
> ok, i will check this, maybe a problem with our symlinks
> thanks for the info.
FWIW: They are different sizes. The one i saw in the build output was:
>
>> Hey, it looks to me that with the last few pushes, the ducati firmware
>> being grabbed is now out of date for the plugin/kernel.
>>
>> This is as of yesterday around noon, when i last kicked off the build.
>>
>> I did verify the kernel is reporting the firmware was loaded, iva was
>> started and respoinding to rpc/dce pings.
>> However,trying to use the gst-ducati decoder gives a dce error of
>> "could not get plugin base: -22".
>
> ok, i will check this, maybe a problem with our symlinks
> thanks for the info.
3122302 ducati-dce-sysm3.xem3
The one from the ti-firmware-ipu-dce PPA is:
3618829 ti-firmware-ipu-dce.xem3
This was from a clean build yesterday.
>
>>
>> I then grabbed the latest firmware from the ti-omap ppa package
>> (ti-firmware-ipu-dce), overwote the ducati firmware in /lib/firmware,
>> rebooted, and that made things happy again.
>
> No problem decoding a video ? , that's a good news
(mainly to check for leaks/etc), with no issues, even if i ctrl-c'd it
in the middle/etc.
>
> Tom
Thomas Genty
23 oct 2012, 5:43:03 p.m.23/10/12
para geexbo...@googlegroups.com
Le 23/10/2012 21:58, Daniel Berlin a �crit :
both packages firmware-arm-syslink-mm & firmware-arm-ipu-dce
have the same files with different size
remove firmware-arm-syslink-mm & re-install firmware-arm-ipu-dce should work
Tom
> On Tue, Oct 23, 2012 at 3:10 PM, Thomas Genty <toml...@gmail.com> wrote:
>> Le 23/10/2012 17:44, Daniel Berlin a �crit :
>>
>>> Hey, it looks to me that with the last few pushes, the ducati firmware
>>> being grabbed is now out of date for the plugin/kernel.
>>>
>>> This is as of yesterday around noon, when i last kicked off the build.
>>>
>>> I did verify the kernel is reporting the firmware was loaded, iva was
>>> started and respoinding to rpc/dce pings.
>>> However,trying to use the gst-ducati decoder gives a dce error of
>>> "could not get plugin base: -22".
>> ok, i will check this, maybe a problem with our symlinks
>> thanks for the info.
> FWIW: They are different sizes. The one i saw in the build output was:
> 3122302 ducati-dce-sysm3.xem3
that's the one from firmware-arm-syslink-mm-2.x.8~2+dce1+1.1
>>> Hey, it looks to me that with the last few pushes, the ducati firmware
>>> being grabbed is now out of date for the plugin/kernel.
>>>
>>> This is as of yesterday around noon, when i last kicked off the build.
>>>
>>> I did verify the kernel is reporting the firmware was loaded, iva was
>>> started and respoinding to rpc/dce pings.
>>> However,trying to use the gst-ducati decoder gives a dce error of
>>> "could not get plugin base: -22".
>> ok, i will check this, maybe a problem with our symlinks
>> thanks for the info.
> FWIW: They are different sizes. The one i saw in the build output was:
> 3122302 ducati-dce-sysm3.xem3
both packages firmware-arm-syslink-mm & firmware-arm-ipu-dce
have the same files with different size
remove firmware-arm-syslink-mm & re-install firmware-arm-ipu-dce should work
Tom
Davide Cavalca
23 oct 2012, 11:44:58 p.m.23/10/12
para geexbo...@googlegroups.com
Il 2012-10-23 12:58 Daniel Berlin ha scritto:
> On Tue, Oct 23, 2012 at 3:10 PM, Thomas Genty <toml...@gmail.com>
> wrote:
>> Le 23/10/2012 17:44, Daniel Berlin a écrit :
>>
>>> Hey, it looks to me that with the last few pushes, the ducati
>>> firmware
>>> being grabbed is now out of date for the plugin/kernel.
>>>
>>> This is as of yesterday around noon, when i last kicked off the
>>> build.
>>>
>>> I did verify the kernel is reporting the firmware was loaded, iva
>>> was
>>> started and respoinding to rpc/dce pings.
>>> However,trying to use the gst-ducati decoder gives a dce error of
>>> "could not get plugin base: -22".
>>
>> ok, i will check this, maybe a problem with our symlinks
>> thanks for the info.
>
> FWIW: They are different sizes. The one i saw in the build output
> was:
> 3122302 ducati-dce-sysm3.xem3
>
> The one from the ti-firmware-ipu-dce PPA is:
>
> 3618829 ti-firmware-ipu-dce.xem3
>
> This was from a clean build yesterday.
Good catch, thanks! Our defconfig was still including the old syslink
> On Tue, Oct 23, 2012 at 3:10 PM, Thomas Genty <toml...@gmail.com>
> wrote:
>> Le 23/10/2012 17:44, Daniel Berlin a écrit :
>>
>>> Hey, it looks to me that with the last few pushes, the ducati
>>> firmware
>>> being grabbed is now out of date for the plugin/kernel.
>>>
>>> This is as of yesterday around noon, when i last kicked off the
>>> build.
>>>
>>> I did verify the kernel is reporting the firmware was loaded, iva
>>> was
>>> started and respoinding to rpc/dce pings.
>>> However,trying to use the gst-ducati decoder gives a dce error of
>>> "could not get plugin base: -22".
>>
>> ok, i will check this, maybe a problem with our symlinks
>> thanks for the info.
>
> FWIW: They are different sizes. The one i saw in the build output
> was:
> 3122302 ducati-dce-sysm3.xem3
>
> The one from the ti-firmware-ipu-dce PPA is:
>
> 3618829 ti-firmware-ipu-dce.xem3
>
> This was from a clean build yesterday.
firmware packages, which aren't needed anymore and were hijacking the
ducati-m3-core0.xem3 symlink. Should be fixed now.
Davide
Responder a todos
Responder al autor
Reenviar
0 mensajes nuevos