how to run a simple test using GateSpace open acs

[panchdev]

hi !

i am using GateSpace OpenAcs for first time ,
i am not sure about how to run a simple test using one of the test
methods given there such as inform, reboot , upload , transfer
complete etc.

i added the device id using Find Device ID button which is mac address
of my computer
and tried to run the test and it displayed a blank log file

I need your help in figuring out that what kind of script or
application i need at the client side (that is running on my
computer) which will interact with the ACS.

and if it is possible then please provide me with a sample script for
communicating with openAcs.

i would be very thankful for any help

[panchdev]

hi !
i forgot to mention that i am using Gsoap 2.7 and TR069 xsd file
http://www.broadband-forum.org/cwmp/cwmp-1-0.xsd

[Greg Baltzer]

I'm not familiar with the xsd file you mentioned.

On your OpenACS admin page, you can download a TR-069 client application
that can be built and run on a linux workstation. I suggest you use it.

All communications are initiated by the client - if you don't have a client
application, there will be no log data (ie. No test will actually run).

[panchdev singh]

thanks very much Greg for such a quick response
but i am not able locate the client application you mentioned in the last mail

--
regards
Panchdev

[Greg Baltzer]

Look in the “Documentation” section of the page.

Listed as:
Common WAN Management Protocol Client (CWMPc) software

[panchdev singh]

thanks very much Greg i found that client application...

i ran it as ./cwmpc -d -l 192.168.2.11 -w 192.168.2.11

note : 192.168.2.11 is my local IP adress

and the following messages were coming in the terminal
************************************************************************

Create Instance: InternetGatewayDevice.Layer3Forwarding.Forwarding.10.
Create Instance: InternetGatewayDevice.Layer3Forwarding.Forwarding.9.
Create Instance: InternetGatewayDevice.Layer3Forwarding.Forwarding.8.
Create static instance: InternetGatewayDevice.LANDevice.1.
Create Instance: InternetGatewayDevice.LANDevice.1.LANHostConfigManagement.IPInterface.1.
Create static instance: InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.1.
Create static instance: InternetGatewayDevice.WANDevice.1.
SIOCADDRT: Operation not permitted
SIOCADDRT: Operation not permitted
SIOCADDRT: Operation not permitted
Data Model restored from config.save
cpeLockConfiguration( LockCnt=1)
closeConnection Discard
cpeUnlockConfiguration( LockCnt=0, changed=False)
cpeLockConfiguration( LockCnt=1)
closeConnection Discard
cpeUnlockConfiguration( LockCnt=0, changed=False)
cpeLockConfiguration( LockCnt=1)
closeConnection Discard
cpeUnlockConfiguration( LockCnt=0, changed=False)
cpeLockConfiguration( LockCnt=1)
closeConnection Discard
cpeUnlockConfiguration( LockCnt=0, changed=False)
cpeLockConfiguration( LockCnt=1)
closeConnection Discard
cpeUnlockConfiguration( LockCnt=0, changed=False)


*******************************************************
now i want to know that how do i use the open acs control panel settings
to run a sample test for CWMPc application

once gain thanks very much Greg for your quick and helpful replies

--
regards
Panchdev

[Greg Baltzer]

Please forward to me the cpestate.xml file you are using.

[Greg Baltzer]

By the way... You should specify the interface name not the IP address.

Use the ./cwmpc –h to get the help on command line options