Cod Hacked Version
Matilda Equiluz
(Edit: I would appreciate it if you wouldn't add anything or change anything. This creepypasta is a WIP and isn't finished. I will only be able to add pages over the weekend, since I have a lot going on over the week.)
I love Henry Stickmin. I've played and 100% completed every game in the series. I'm serious, this series means a lot to me. I've played the games for years now and only recently bought the collection. I preferred the old games, so I planned on Friday to replay them.
It was a Friday night, meaning I didn't have school tomorrow, so I went to make another Newgrounds account to 100% the flash games again. I finished Breaking the Bank, Escaping the Prison, and Stealing the Diamond, and I searched around for Infiltrating the Airship. I went and searched "infiltrating the airship", and I couldn't find the game, but instead I found an announcement by PuffballsUnited. He said in the announcement: "Someone hacked into my account, and stole the .swf file for Infiltrating the Airship, made his own mod, and tried publishing it as his own. I stopped him, and allowed him to publish it on some other site. I'm trying to fix the .swf file to post it back to Newgrounds, but it might take some time. Be patient, and it'll be back up on Newgrounds. Anyways, here's the link to his game:" and posted the link.
I knew this was important if I was going to find a mod of a game I've already completed tons of times. I opened up Discord, and started a call with two of my friends that are online. I'll name the first one Elmer, and the second one Ray for convenience. I start up the flash game, and I try to get the rank where you part with the government, this rank being called "Government-Supported Private Investigator". I boot up the first cutscene and the game is the exact same, other than the Toppat Clan holding more dangerous weapons than they actually had, so I'm gonna guess the Toppat Clan wants to kill me. I get on top of the ship and use the Earpiece, as Charles gives me directions. The vacuum is the correct option, as usual, but the person that you suck up is actually killed, and not just caught in the vacuum. He screams in agony as he's torn to shreds, and Henry walks into the ship. A kill counter pops up, only displaying the number one. The Toppat Clan is having a meeting, but a meeting about taking down the government and killing everyone in it to reign supreme. I chose to use the glue to stick to the wall and pass by, but it leads to a fail, which is different from the original game. The Toppat Clan member takes Henry's body and has a conference about what to do with him, and the clan sacrifices him for a blood ritual. My friends were usually doing their own thing, like playing Persona but they eventually look at what I was doing and were confused as hell, same with me. I was sitting there questioning at what was even going on, compared to the original game. I choose disguise, and Henry puts on a disguise, and walks through the room, and everyone asks him if he's okay. Henry takes off the disguise, and pulls out a large AK-47 and proceeds to try to kill everyone on the ship. (Un)fortunately, the leader doesn't die and tries to kill Henry, in a quick-time event. I died twice, but eventually made it. I decide to quit the game for now and go to bed to clear my mind.
when i nmap my server ,postman started a port 15611, run a websocket service ( ogar agar.io server)(game server?)
http:// IP:15611 display upgrade required
is this OK? previous version no this .
@VIPPP This websocket server is being created by Postman for usecases related to Postman Interceptor. (You can read more about it here). It can be used to capture requests from browser to Postman app via this WebSocket server. This is also a local interface with encrypted messages and communication on this server should not be happening until Postman Interceptor extension is installed.
So you have seen many tutorials for creating a paracord Helix or DNA or twister or Cyclonic Fob...right? Me too :), (what a beautiful coincidence :] ). So why another tutorial? Well, like I said it is a hacked version, which means it is not like traditional knots you have been tying to make a helix, in fact it was an accidental outcome while making something totally different. So named as Hacked Version.
I was trying to learn to make Trilobite Knot from one of the books of JD (amazing person) of fusionknots.com and something happened (keep reading to find out) by mistake and resulted in a beautiful helix knot, so my dear friends I thought of sharing the idea with you.
At the end of this tutorial you will be able to make a zipper pull , a bracelet and an awesome helix fob, so that is a 3-in-1 combo. And don't worry, you will only make one thing and rest will follow. How cool is that :)
NOTE: At this point, you may choose if you want to make a more prominent helix curve or a normal one. If you pull the cord now to make the weave tight and if you continue to do so, you will make a helix with small curves (like the hot pink one in the main picture of this tutorial). Otherwise a weave with moderate tightness will yield a bigger helix curve (like the white one). Your call.
Hello everyone! reGOSH finished the first Spanish version of the Hacking Instructions for using the Logitech C270 with the OpenFlexure Microscope v6. Kudos to @topogarcia and @pcremades for leading the writing process.
This is great. I am updating the C270 web cam optics module for version 7 of the microscope to be more the same as the Pi camera version. This will give a lower magnification, similar to the Pi Camera basic optics version. Your first photo shows both the C270, and the Pi Camera mounted in the microscope, how do you find they compare in use? Previously people have said the C270 magnification is too much, which is part of the reason for modifying it. (eg USB Webcam Lens Spacers and Camera Platforms)
Current progress is on Gitlab at Lens spacers for C270 and Arducam B0196 (!309), there is a view app button that will take you to the instructions for that merge request. The most recent STLs are linked in the customisations page.
Disclaimer: I took these pictures at different times, conditions, and illumination. I omitted calibration and other technical recommendations due to the short time for testing before the last workshop.
Hi all
I was thinking on importing some minor features of the 7 version to the 6 version that I think is better for C270. Particulary the stage with nut traps.
I think the one in the repository is v7 but not sure how to to get to v6 in .scad. Can any one point at me where/how to find it?
Thanks
The repository has a tag on the commit for the V6.1.5 release (and all other releases) so you can fork or branch from that point: Tags OpenFlexure / openflexure-microscope GitLab. It would be good to know what it is that you particularly need from V6 that is not so good in V7, it may be not so difficult to build a version similar to V6 from the V7 code, which would keep everything together. For example it should be possible to switch off the cable tidies to make a simpler version for manual use, although the walls might not join up properly automatically.
Hey folks, indeed, there is the new ESP32-S3-based camera. Much better than the ESP32-CAM AI TInker module. We got some from the Seeed XIAO line. Testing it now. Same camera module, different controller. Firmware here: mat
The form factor looks more simple to integrate with the openflexure microscope as it is small enough to fit between teh stage legs. Some of the ESP32 camera boards are too long and would need to point downwards.
edit: There actually is a tag: med-stable-preview-version. All tags are archived at -microscope/ so -microscope/med-stable-preview-version/ has all of the built STLs at that point. Obviously it is not a tested release version, so anything may not work or be incompatible with itself or with V6.1.X or V7. You will need to do any testing yourself.
The test for the manual version of V7 came out OK. This is a very poor photo with the new version of the Logitech C270 webcam optics installed (see USB Webcam Lens Spacers and Camera Platforms on this forum)
manual_1736668 63.7 KB
It is unlikely that this will get into the main release for a while, but it is available with the View app button on the merge request (with the usual caveats that it is an untested work in progress, so may be broken at any time)
By downloading this hack, you will receive the A4 tie belt pattern sheet and a digital instruction booklet.
You can also read a step-by-step tutorial on our blog proposed by the bubbly Charlne Hands (IG @charlene_hands)
To sew this hack, get our LA Jupe pattern and sew the buttoned version.
Delivery to France is free from 90 euros of purchase. The delivery time after preparation of your order is 48 to 72 hours. A doubt when receiving your order? You have 14 days to change your mind and return unsuitable products to us. PDF and dematerialized products cannot be returned or exchanged. All remnants cannot be exchanged or refund.
Hi,
I have read many walkthrough on this machine and their nmap scan shows the samba version but for me it just shows samba 3.x-4.x . How can i actually find the version of smb. COuld someone please help me out finding the smb version.
Thank you
A little late but the reason this is happening is because the script that ships with nmap on Kali needs to be updated. You need to grab that contents of the file smb.lua from the nmap repo and use it to replace the script that ships with Kali. Then your smb enumeration will work properly.
Kali Linux is an open-source, Debian-based Linux distribution geared towards various information security tasks, such as Penetration Testing, Security Research, Computer Forensics and Reverse Engineering.
64591212e2