Run Xforce Keygen As Admin Mack
Berry Spitsberg
I am using a Mac for the first time and need to run Terminal as an admin. I have installed NodeJs and Git and want to download Phone Gap/Corova but when I try to install Cordova, it comes back with an error saying I should be an admin when running the terminal. How do I open a command prompt in terminal as an admin to the Mac Pro?
Setting a user's primary group ID to 80 will add them to the admin group, and hence give them admin rights on the computer. I don't know of any specific problems this would cause, but it's not the normal way to make a user an admin, and hence I wouldn't consider it optimal. I'd rather make someone an admin by adding a secondary membership in the admin group with the command sudo dseditgroup -o edit -a usernametomakeadmin -t user admin, or just by checking the "Allow user to administer this computer" box in the Users & Groups preferences.
On Mac, all installations must be placed in /Applications, which always requires administrative access to write too. If 1Password was to be installed in another location, some of the integration and security features we rely upon wouldn't work. Unfortunately, this means there is no way around the administrative access rights requirement when installing or updating 1Password on Mac.
If your IT team has any deployment tools such as Intune, Jamf, Kandji, or others, 1Password does have installation packages which are suitable for use in these tools, which means that the installation of 1Password, and subsequent updates would be managed by the IT team, and not end users. Admin permissions are still needed, but end users wouldn't be prompted for updates and credentials. If you're interested in this as a potential work around, we have a helpful support article on the topic: Deploy 1Password for Mac and Windows
In the linked article, it seems that once deployed with JEMF, there is no way the user could auto update 1password, but the admin should provide the new pkg. Is that so? or is there a way to deploy automatic updates to the users?
Note that this may result in the new account being logging in automatically when the system is restarted, replacing whatever account may have been set to automatically log in previously. If you need to retain access to the original account without knowing its password, this may mess that up.
That should bring up a dialog that will allow you to change your password and, maybe, set the account to admin. If you cannot set an account to admin, then you will need to reboot into single user mode (hold Cmd-S while starting up your Mac). When you get to the command line (black screen, white text) type:
This makes the file system writeable, and then removes the file that tells OS X that you've setup the system. Hit Ctrl-D" to continue your boot and you should get the "Welcome to Macintosh" startup and you will be able to setup a NEW account (make sure it is a new account). This account will be an admin account.
The goal is to remove a flag file /var/db/.AppleSetupDone which tells macOS that the Setup Assistant has already completed. If the file is missing macOS will launch the Setup Assistant which includes the creation of a new account with administrative privileges (same as on first boot of a new Mac). Note that this may result in the new account being logging in automatically when the system is restarted, replacing whatever account may have been set to automatically log in previously. If you need to retain access to the original account without knowing its password, this may mess that up.
a) use Terminal in Recovery. First you boot in Recovery Partition (CmdR at boot) and select Disk utility from the Utilities window. Select your system volume (usually named Macintosh HD) and click Mount button on the toolbar. Now the volume is read/write. Close Disk Utility, launch Terminal from the menu and type following command:
If you have another Mac available, you can use Target Disk Mode (T at boot) and connect FireWire, Thunderbolt or USB-C cable between the Macs. On the other Mac you will see a yellow icon representing an external disk (but is actually the internal disk of your Mac in Target Disk Mode) which you can access with full read/write capabilities. Note the yellow volume name (usually Macintosh HD) and type following in Terminal (with appropriate volume name entered):
PS: This procedure does require you to type a fair number of commands, you can alternatively use the OS X setup assistant for recreating the admin account. To do so, after booting to Single User mode and setting the file system for write access (see above), then run the following command:
*mounting disks r/w is now four commands in two sections and a bunch of extra info scrolled past while I was doing them, so the instructions scrolled off the top of the screen before I could finish them! And you can't copy/paste. Also dscl failed to do anything, complaining about missing files
A Medicare Administrative Contractor (MAC) is a private health care insurer that has been awarded a geographic jurisdiction to process Medicare Part A and Part B (A/B) medical claims or Durable Medical Equipment (DME) claims for Medicare Fee-For-Service (FFS) beneficiaries. CMS relies on a network of MACs to serve as the primary operational contact between the Medicare FFS program and the health care providers enrolled in the program. MACs are multi-state, regional contractors responsible for administering both Medicare Part A and Medicare Part B claims. MACs perform many activities including:
Currently there are 12 A/B MACs and 4 DME MACs in the program that process Medicare FFS claims for nearly 51% of the total Medicare beneficiary population, approximately 34 million Medicare FFS beneficiaries. In Fiscal Year 2023 (FY2023), the MACs served more than 1.2 million health care providers who are enrolled in the Medicare FFS program. Collectively in FY2023, the MACs processed more than 1.1 billion Medicare FFS claims, comprised of approximately 192 million Part A claims and 950 million Part B claims, and paid out approximately $431.5 billion in Medicare FFS benefits.
There are four A/B MACs that process home health and hospice claims in addition to their typical Medicare Part A and Part B claims. Please note that the four HH+H areas do not coincide with the jurisdictional areas covered by these four A/B MACs. Learn more about HH+H areas and the MACs responsible for them at Who are the MACs.
The DME MACs process Medicare Durable Medical Equipment, Orthotics, and Prosthetics (DMEPOS) claims for a defined geographic area or "jurisdiction", servicing suppliers of DMEPOS. Learn more about DME MACs at Who are the MACs.
MACs work with multiple functional contractors to administer the full FFS operational environment. Learn more about the relationships between the MACs and the functional contractors by viewing the diagram of MACs: The Hub of the Medicare FFS Program (PDF) and reading about what the functional contractors do at Functional Contractors Overview (PDF).
I've read on Network Security forums that I should have two accounts on my Macs (I'm the owner and only user), 1 for Admin controls / access and another for general use. I was under the impression that I only needed one account, and even though it was specified as an "Admin" account I didn't really need to worry about it as I would still need to go into Directory Utility and "Enable Root User" to really allow a program to gain access / control of my Mac.
Most security professionals recommend running with the fewest privileges as are necessary, elevating to the higher privilege only when needed, and returning to the lower privilege when the higher one is no longer needed.
Apple recommends running as a non-admin user all the time. It is the best for security, and is convenient too, since nearly all admin and root tasks can be done from a non-admin account, simply by authenticating with an admin username/password when prompted. I do admin and root tasks from my non-admin account all the time this way. My admin account almost never gets used; it has been months since I actually logged in to it.
Any administrative user can get root privileges, so the idea is that since any malware would have the privileges of the user running it, a standard account would limit the damage to whatever that user could do.
Running as an Admin user currently is only a danger to yourself accidentally messing things up. As hackers get better, there may be a possibility that they could exploit that power the admin user has to take over your computer.
If you follow K T's advice, be aware that you will not be following Apple's own security configurations guidelines. Apple says to use admin accounts only for tasks that really need to be run from them, and to keep admin accounts logged out at all other times. They even go so far as to say to "never check e-mail or browse the web while logged in to an administrator account".
I recently decided that for day-to-day use, we shouldn't use admin accounts, so I removed the admin rights from my wife's account, which worked fine, but I am unable to remove them from my own account. The option is greyed out whether I log in as myself, or as the "root" user. I have never been logged in to the account when trying to remove admin rights from it.
7fc3f7cf58