How To Build A Bonsai Tree In Minecraft

0 views
Skip to first unread message

Bertha Simmons

unread,
Jul 26, 2024, 12:27:19 AM7/26/24
to frasaselma

Bonsai Trees is a mod created by Davenonymous. It adds Bonsai Pots that allow for growing trees within two vertical blocks. Grown trees can be harvested from the Bonsai Pots for drops specific to that tree.

It has support for trees from vanilla Minecraft, Forestry (and Extra Trees), Pam's HarvestCraft, IndustrialCraft 2, and Integrated Dynamics. Tree drops and tick growth multipliers can be modified using CraftTweaker.

Saplings, except those which use NBT data, can be made compatible using JSON configuration files. Each tree requires a TreeType definition, which can be either JSON or Java, and a shape definition, which is JSON. Tree shape definitions for TreeTypes implemented in Java can be generated automatically using the generateMissingShapes command, whereas shape definitions for JSON TreeTypes have to be constructed in the world and saved using the saveTreeShape command.

There are two blocks added by Bonsai Trees: the Bonsai Pot, and the Hopping Bonsai Pot. The only difference between the functionality of the two blocks is, the Hopping Bonsai Pot will automatically harvest its tree and deposit the loot into a container placed below itself. Otherwise, trees grow exactly the same speed (when growing in the same material).

To put your dirt (or other material) into the bonsai pot, right click on an empty bonsai pot with the dirt. Then you can right click on the dirt with a sapling to place the sapling into the pot. When you hover over the sapling in the pot you can see a percentage. When the percentage gets to 100% the tree is grown. Right click on the fully grown tree with any tool that can break wood (axe, paxel, etc). The tree will break and start growing again from scratch. All of its drops will drop to the ground. To remove the sapling from the pot, right click with your tool on a non-mature tree. This can be finicky, but you will have the best luck right clicking the center of the top of the pot. If it is not working, try changing the angle you are facing the bonsai pot from. To change the block that the tree is growing on, you have to break the bonsai pot and replace the different block.

The speed that a sapling grows is determined solely by the substance which it is growing on. Below is a list of substances which you can use to grow trees. Keep in mind that if you are playing in prestige mode, some of these variants might need to be locked.

"Help! My Bonsai tree is dying!" Unfortunately, we get cries for help quite often on our forums. So we created a how-to guide on reviving a dying Bonsai. I'll take you through all the steps to rescue your bonsai.

But there's hope for you yet! How do you revive a bonsai tree?
Bonsai care is not that difficult. However, we estimate that more than 75% of newly bought Bonsai trees die within the first month. Follow the steps below to successfully care for your Bonsai tree.

First of all, you need to know what kind of tree you have. Indoor Bonsai have entirely different needs than outdoor Bonsai. You need to adapt the care of your Bonsai to its specific needs. If you're not sure what kind of Bonsai you have, use the Identify my Bonsai guide. If you're just starting out, you most likely have a Juniper or Ficus tree.

Now that you've identified your Bonsai, learn how to take care of it correctly in our Tree species section. If you happen to have a Ficus or Juniper tree simply click the link underneath the corresponding image above. Once you start watering and fertilizing your tree correctly, and you've found the optimal placement for your specific tree, your Bonsai is on it's way to recovery, and healthy growth.

#1 Mistake: Forgetting to water
Bonsai trees are planted in small pots, which doesn't leave a lot of room for reserves in terms of nutrients and water. If you forget to water your Bonsai and the soil dries out completely, the roots will quickly dry out and the tree will die. You'll know your roots are drying out when the soil is completely dry and the leaves start to wither and fall off, or if you have an evergreen, its foliage will slowly turn yellow. If the roots have dried up completely you won't be able to save the tree. However, If the roots aren't completely dry yet, you can rescue the tree by watering it properly and following the appropriate care routine.

How much to water your Bonsai needs depends on the type of tree you have and the soil you've planted it in. If you've purchased a cheap starter Bonsai, chances are it's been shipped over from China in clay-like soil to survive the journey. This kind of soil does not absorb water quickly, and the trees can arrive with complications. To help your tree regain its strength and get it ready to repot, make sure you water it thoroughly. Water your tree, wait a few minutes, and then water it again, to make sure the entire clay-like soil has a chance to absorb all the moisture. Once your tree has recovered, repot it in the correct soil mixture as per our care guide. Read more about watering Bonsai trees and about repotting your bonsai.

#2 Mistake: Placing an outdoor tree indoors
The Juniper is one of the most common Bonsai trees for beginners, but it is an outdoor tree. When placed inside, its foliage will turn yellow and the tree will slowly die. Now that you have identified your tree species, you know where to place it, and how to care for it.

#3 Mistake: Overwatering
If you've planted your Bonsai using a soil mixture that retains a lot of water, frequent watering will keep your soil wet and cause the roots to rot and die. Neglecting your tree of water can kill a tree in days, but overwatering kills your tree slowly in a matter of weeks. Read more about Watering Bonsai trees.

#4 Mistake: Insufficient light
Most, if not all indoor Bonsai plants are subtropical trees. This means they require a lot of light to survive. Most homes do not get enough natural light, so it's important to place your tree directly on a south-facing window. Anything else is just not good enough. Read more about choosing the right place for your tree.

#5 Mistake: Lack of patience
Beginners are sometimes overly enthusiastic about redesigning their trees every other week. They tend to over-prune and adjust their wiring too often, and trees can't keep up with this rate of change. Big changes to your Bonsai, like repotting or significant pruning, should only be done once a year, and at the appropriate time of year. In between these stylings, care for your tree, and maintain its shape, but do not attempt to make big changes more than once a year.

If you've cared for your tree properly as per the care guidelines, and it is still unhealthy and/or dying, your tree may be infected with some kind of pest. Check the leaves of your tree for insects and carefully remove the tree from its pot to see if there are any insects in the root mass. Read more on Pests and diseases or post a few images on our Bonsai forum to get help.

There is no magical cure to help your tree recover. The only thing you can do is follow the care guidelines for your particular tree. Don't neglect or overwater, and place your tree in an appropriate location. Hopefully, your tree will recover, and if you continue to care for your tree, it should live a long and healthy life.

Growing Bonsai trees is a fascinating hobby, so it's a real shame when beginners fail to keep their trees alive and get discouraged. Taking care of a Bonsai is not very difficult. Knowing which tree species you have and what your Bonsai needs are is all there is to it. Keep learning and improving!

The build appears relatively simple and elegant at a distance, but will it promote an opportunity to enter a state of mind where it becomes the total focus? Read on, as I explore the set in this hands-on review.

Having built the tree, and put it in its pot, it is time to build the stand for the tree. We start with a simple reddish brown frame, and build around it with alternating plates, and offset plates: this will leave us with a half module space between the adjacent tiles. We then add the legs: inverse slopes, as well as rounded plates (complete with tiles and ingots)

Over all, this was an intigueing build. Both the blossoms and the leaves were fun to put together, even if getting them optimally aligned was challenging my patience from time to time. The designer, Nico Vs has commented that the set is designed to be customised, with adjust the foliage to suit your own interests: as such a range of different sketches models are provided in the manual. It will be great to see how people might modify their own versions of the bonsai over the next few months.

What do you think of this set? Does it appeal? Do you just like the idea of getting your hands on 100 light purple frogs? Are you looking forward to customising your own version? Why not leave your comments below, and follow the Rambling Brick for further updates.

An enhanced Minecraft mod, based on the original Bonsai Trees 3 by thraaawn, that allows growing miniature versions of trees within a single block space, now with added compatibility for Oh the Biomes You'll Go (BYG) mod!

A particular soil might be needed for some of the trees. And the different types of soil provide different boosts to thegrowth of your Bonsai. It is recommended to use JEI to look up compatible saplings and available soils. TheOneProbe willshow what sapling is growing on what soil and its progress.

Insert a hopper into one of the upgrade slots to make the Bonsai Pot automatically export all harvested items into theinventory below. This is not needed to extract the items in a different way, e.g. you can also place the hopper or somepiping below the pot.

Insert any kind of axe into an upgrade slot to make the Bonsai Bot automatically cut the tree for you once its fullygrown. But be aware that items that do not fit into the output buffer will be voided. You can enchant the axe withEfficiency, Fortune and/or Silk Touch to get additional upgrade benefits!

Reply all
Reply to author
Forward
0 new messages