Framebuilders

yes, they have value... the question, as you probably know, would be how much effort is it to measure

Hey Jim, I used 3/16" (~5 mm) 4130 plate when I made some plates 8 or so years ago. It seemed to

I think that's actually a stick welder, which you can use for scratch-start TIG with a few extra

Hi Builders, Many know I've been working on this for some time, and at long last I have *all* the

Anybody have a stash, or know where to get, DT Swiss replacement levers? I could not find a shop with

Or depending on the original diameter, bond in a tube with a seatclamp, and use a smaller OD seatpost

Alex, I ran those numbers and got pretty much exactly the same results so I think you're right on

Don, I'm assuming your question is to me. No, I'm only saying the tire and rim need to be

Found some. Thanks folks! On Wednesday, June 1, 2022 at 2:16:57 PM UTC-7 Tom T wrote: Looking for 2

In about 1974 or 1975 Motobecane used Swiss threads. There was debate going on at the ISO meetings

I've been asked to miter some titanium frame tubes. I've never worked with Ti, so I'm

NOT MY AD. If it was anywhere near me I'd grab it to replace my Nortac. There's a nice

Hey everybody! I've been having a great time in Europe, and Lester from: https://lestercycles.com

Crust will sometimes sell frame parts, sorry if you checked and they don't have any. Is the

Hello, To help you remember, I am Roland Della Santa's cousin. I'm wondering if there is

On 4/29/22 18:24, Mark Bulgier wrote: > I just repaired a Shimano UF (semi-vertical), it cracked

Hello everyone— In the last couple of weeks you guys bought over 600 Reynolds seat stays from me.

Omar, I have been slowly collecting the parts for 5 vintage framesets, and already have 1 full

With the previous photos of the barrel adjusters, upon second look, you can see that I had not

Hey all- I'm in the process of building my second Ti frame after taking a UBI course this past

Thanks Drew. If all goes as planned I should be able to pack this in a typical large suitcase, 20x26

Albie: I would be interested in the Quik-lok clamp if it is still available. Thanks, Daniel On Monday

Omar, I'm happy to buy them for our Ukraine frames. I'm traveling for a couple of days but

Since 2000, I've been involved with a project to provide bicycles to Ukrainian pastors. I've

Mark- You are a maniac! Nice work! I really want you to make some Rube Goldberg linkage so that you

The package has sold On Friday, March 11, 2022 at 12:18:57 PM UTC-8 corrie martin wrote: "grab

Hi All, I want to thank you for your support over the last fifteen years of designing, manufacturing

For Sale: Detroit Torch DHC2000 Promaster Oxy Acetylene Kit Cobra W5100-140 Acetylene Low Pressure

I have a variety of tubes for sale. Mostly Columbus and some True Temper tubes. See attached price

Alex Llama wrote "To piggyback off of what Mark said, V-blocks are a great, cheap starting point