Physical design engineers 5+ yrs exp

[Guthula]

AMD Hyderabad is looking for PD canditates with over 5 yrs of exp.

Key Responsibilities:

The position is for a Physical Design Engineer in the AMD PD group
catering to building the next generation fusion SoCs and discrete
graphics processors. Fusion programs cater to the next gen compute
requirements bringing in CPU, GPU and other functions on an integrated
monolithic die. This position requires interface with large front-end
design teams in US, Canada, Shanghai and India, mentoring new hires
and owing an entire chip or portion of the chip from RTL/gates to
tapeout.

The Physical Design Engineer will be responsible for 1. full chip
activities covering floorplanning, clocking, budgeting, timing,
verification etc., and/or 2. block level physical design activities
which includes: floor planning, placement, scan-reordering, clock tree
synthesis, in place optimization, routing, timing analysis/closure,
ECO tasks (timing, functional, noise based ECOs), design rule checks
(DRC), and Layout vs. Schematic (LVS) checks, low power solution
development etc. In addition to this, he/she will also be
participating in Physical design flow development/upgrade by
continuously working with internal design teams and CAD vendors.

Job Requirements:
• Understanding Verilog HDL
• Understanding Deep Submicron effects such as 90nm and below
• Understanding OCV, DFM, DFY
• Excellent Block level and Full-chip physical design skills
• Self-motivated, leadership skills and experience working with
global teams
• Minimum 5 years of ASIC physical design experience
• Back ground of ASIC Physical Design: Floor planning, Clock Tree
Synthesis, P&R, extraction, EM/IR Drop Analysis, timing and Signal
Integrity closure, physical verification, low power implementation etc
• Hands on experience and expertise in Cadence, Synopsys, Magma or
Mentor Physical Implementation Tools
• Should have participated in a minimum of 3 fullchip tapeouts.

Position: Physical Design Manager

Minimum Exp: 10 years (3+ years management preferred)
Key Responsibilities:
The Physical Design Manager will be responsible for the planning and
execution of all SoC or IP physical design activities for AMD’s next
generation products. She/he will be responsible for execution of
Physical Design (place and route) duties both at block level, IP/macro
level, as well as chip-level. This includes: floor planning,
placement, scan-reordering, clock tree synthesis, in place
optimization, routing, timing analysis/closure and ECO tasks (timing,
functional, noise based ECOs), design rule checks (DRC), and Logical
vs. Schematic (LVS) checks.
The candidate will:
• Provide technical direction, mentoring, skill development
• Be a forward thinker to improve process and innovation
• Interface with other local and global front end and Physical Design
Managers/Directors to define schedules, resource requirements etc.,
• Provide leadership and direction in crisis
• Interface with front-end ASIC teams to resolve issues and problems
• Responsible for execution of program. Multiple projects on the go.

In addition, strong communication skills and an ability to work in
large groups are essential to being successful. Insight into multi-
site project development will be an asset.
The following aspects are desirable:
• Technical
o Understanding Verilog HDL
o Understanding Deep Submicron effects such as 90nm and below
o Understanding OCV, DFM, DFY
o Excellent Block level and Full-chip physical design skills
o Back ground of all aspects of ASIC Physical Design: Floor planning,
Clock Tree Synthesis, P&R, extraction, EM/IR Drop Analysis, timing and
Signal Integrity closure, physical verification, low power
implementation etc
o Hands on recent or past experience and expertise in Cadence,
Synopsys, Magma or Mentor Physical Implementation Tools
o Understanding of complete SoC development cycle, from architecture
to post-silicon debug preferred
o Should have participated in a minimum of 3 fullchip tapeouts
• Management
o Minimum 3 years of ASIC physical design management experience,
working with global teams
o Self-motivated, conflict resolution skills, and experience working
with global teams across time zones
o Detail oriented and schedule driven
o People management skills as well as technical project management
skills

[BABU SRINIVASAN]

--
You received this message because you are subscribed to the Google Groups "FPGA Design" group.
To post to this group, send email to fpga-...@googlegroups.com.
To unsubscribe from this group, send email to fpga-design...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/fpga-design?hl=en.