Fowsr, usb_interrupt_read failed

102 views

Skip to first unread message

m.na...@bnc.pl

unread,

Apr 28, 2014, 4:47:04 AM4/28/14

to fo...@googlegroups.com

Hello!

I'm trying to use fowsr (v. 2.0.131015) on my router: ASUS WL-330N3G, and after an installation when I'm trying to read the data from the Weather station with command: "fowsr -fw" I'm getting the error:

libusb: 0.000000 warning [handle_bulk_completion] unrecognised urb status -150

libusb: 0.000443 warning [do_sync_bulk_transfer] unrecognised status code 1

usb_interrupt_read failed (-34) whithin CUSB_read_block(0000,...)

With "lsusb" I'm getting:

Bus 001 Device 002: ID 1941:8021 Dream Link WH1080 Weather Station / USB Missile Launcher

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

And with "dmesg":

[ 0.000000] Linux version 3.10.36 (michal@michal-VirtualBox) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.01 r40567) ) #1 Thu Apr 24 17:36:20 CEST 2014

[ 0.000000] SoC Type: Ralink RT3350 id:1 rev:2

[ 0.000000] bootconsole [early0] enabled

[ 0.000000] CPU revision is: 0001964c (MIPS 24KEc)

[ 0.000000] MIPS: machine is Asus WL-330N3G

[ 0.000000] Determined physical RAM map:

[ 0.000000] memory: 02000000 @ 00000000 (usable)

[ 0.000000] Initrd not found or empty - disabling initrd

[ 0.000000] Zone ranges:

[ 0.000000] Normal [mem 0x00000000-0x01ffffff]

[ 0.000000] Movable zone start for each node

[ 0.000000] Early memory node ranges

[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]

[ 0.000000] On node 0 totalpages: 8192

[ 0.000000] free_area_init_node: node 0, pgdat 80288990, node_mem_map 81003780

[ 0.000000] Normal zone: 64 pages used for memmap

[ 0.000000] Normal zone: 0 pages reserved

[ 0.000000] Normal zone: 8192 pages, LIFO batch:0

[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.

[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes

[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768

[ 0.000000] pcpu-alloc: [0] 0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128

[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2

[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)

[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)

[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)

[ 0.000000] Writing ErrCtl register=000459ba

[ 0.000000] Readback ErrCtl register=000459ba

[ 0.000000] Memory: 29356k/32768k available (2134k kernel code, 3412k reserved, 543k data, 200k init, 0k highmem)

[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

[ 0.000000] NR_IRQS:256

[ 0.000000] CPU Clock: 320MHz

[ 0.070000] Calibrating delay loop... 212.58 BogoMIPS (lpj=1062912)

[ 0.080000] pid_max: default: 32768 minimum: 301

[ 0.080000] Mount-cache hash table entries: 512

[ 0.090000] pinctrl core: initialized pinctrl subsystem

[ 0.100000] NET: Registered protocol family 16

[ 0.120000] rt2880-pinmux pinctrl.1: try to register 52 pins ...

[ 0.120000] pinctrl core: registered pin 0 (io0) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 1 (io1) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 2 (io2) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 3 (io3) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 4 (io4) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 5 (io5) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 6 (io6) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 7 (io7) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 8 (io8) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 9 (io9) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 10 (io10) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 11 (io11) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 12 (io12) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 13 (io13) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 14 (io14) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 15 (io15) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 16 (io16) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 17 (io17) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 18 (io18) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 19 (io19) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 20 (io20) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 21 (io21) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 22 (io22) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 23 (io23) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 24 (io24) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 25 (io25) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 26 (io26) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 27 (io27) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 28 (io28) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 29 (io29) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 30 (io30) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 31 (io31) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 32 (io32) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 33 (io33) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 34 (io34) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 35 (io35) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 36 (io36) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 37 (io37) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 38 (io38) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 39 (io39) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 40 (io40) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 41 (io41) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 42 (io42) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 43 (io43) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 44 (io44) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 45 (io45) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 46 (io46) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 47 (io47) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 48 (io48) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 49 (io49) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 50 (io50) on rt2880-pinmux

[ 0.120000] pinctrl core: registered pin 51 (io51) on rt2880-pinmux

[ 0.120000] pinctrl core: add 6 pinmux maps

[ 0.120000] rt2880-pinmux pinctrl.1: found group selector 7 for sdram

[ 0.120000] rt2880-pinmux pinctrl.1: found group selector 0 for i2c

[ 0.120000] rt2880-pinmux pinctrl.1: found group selector 4 for jtag

[ 0.120000] rt2880-pinmux pinctrl.1: found group selector 6 for rgmii

[ 0.120000] rt2880-pinmux pinctrl.1: found group selector 5 for mdio

[ 0.120000] rt2880-pinmux pinctrl.1: found group selector 2 for uartf

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 24 (io24) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 25 (io25) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 26 (io26) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 27 (io27) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 28 (io28) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 29 (io29) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 30 (io30) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 31 (io31) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 32 (io32) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 33 (io33) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 34 (io34) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 35 (io35) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 36 (io36) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 37 (io37) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 38 (io38) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 39 (io39) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 1 (io1) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 2 (io2) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 17 (io17) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 18 (io18) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 19 (io19) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 20 (io20) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 21 (io21) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 40 (io40) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 41 (io41) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 42 (io42) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 43 (io43) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 44 (io44) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 45 (io45) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 46 (io46) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 47 (io47) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 48 (io48) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 49 (io49) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 50 (io50) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 51 (io51) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 22 (io22) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 23 (io23) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 7 (io7) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 8 (io8) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 9 (io9) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 10 (io10) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 11 (io11) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 12 (io12) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 13 (io13) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: request pin 14 (io14) for pinctrl.1

[ 0.120000] rt2880-pinmux pinctrl.1: failed to lookup the sleep state

[ 0.150000] bio: create slab <bio-0> at 0

[ 0.160000] rt2880_gpio 10000600.gpio: registering 24 gpios

[ 0.170000] rt2880_gpio 10000600.gpio: registering 24 irq handlers

[ 0.180000] Switching to clocksource MIPS

[ 0.190000] NET: Registered protocol family 2

[ 0.200000] TCP established hash table entries: 512 (order: 0, 4096 bytes)

[ 0.220000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)

[ 0.230000] TCP: Hash tables configured (established 512 bind 512)

[ 0.240000] TCP: reno registered

[ 0.250000] UDP hash table entries: 256 (order: 0, 4096 bytes)

[ 0.260000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

[ 0.270000] NET: Registered protocol family 1

[ 0.280000] rt-timer 10000100.timer: maximum frequncy is 6510Hz

[ 0.300000] alarmtimer alarmtimer: no of_node; not parsing pinctrl DT

[ 0.340000] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[ 0.370000] msgmni has been set to 57

[ 0.380000] io scheduler noop registered

[ 0.390000] io scheduler deadline registered (default)

[ 0.400000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled

[ 0.420000] serial8250 serial8250: no of_node; not parsing pinctrl DT

[ 0.420000] pinctrl core: add 1 pinmux maps

[ 0.420000] rt2880-pinmux pinctrl.1: found group selector 3 for uartlite

[ 0.420000] rt2880-pinmux pinctrl.1: request pin 15 (io15) for 10000c00.uartlite

[ 0.420000] rt2880-pinmux pinctrl.1: request pin 16 (io16) for 10000c00.uartlite

[ 0.420000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20) is a 16550A

[ 0.440000] console [ttyS0] enabled, bootconsole disabled

[ 0.470000] pinctrl core: add 1 pinmux maps

[ 0.470000] rt2880-pinmux pinctrl.1: found group selector 1 for spi

[ 0.470000] rt2880-pinmux pinctrl.1: request pin 3 (io3) for 10000b00.spi

[ 0.470000] rt2880-pinmux pinctrl.1: request pin 4 (io4) for 10000b00.spi

[ 0.470000] rt2880-pinmux pinctrl.1: request pin 5 (io5) for 10000b00.spi

[ 0.470000] rt2880-pinmux pinctrl.1: request pin 6 (io6) for 10000b00.spi

[ 0.470000] m25p80 spi32766.0: mx25l3205d (4096 Kbytes)

[ 0.480000] 4 ofpart partitions found on MTD device spi32766.0

[ 0.490000] Creating 4 MTD partitions on "spi32766.0":

[ 0.500000] 0x000000000000-0x000000030000 : "u-boot"

[ 0.520000] 0x000000030000-0x000000040000 : "u-boot-env"

[ 0.530000] 0x000000040000-0x000000050000 : "factory"

[ 0.550000] 0x000000050000-0x000000400000 : "firmware"

[ 0.560000] 0x00000013fc7e-0x000000400000 : "rootfs"

[ 0.570000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only

[ 0.600000] mtd: device 4 (rootfs) set to be root filesystem

[ 0.610000] mtd: partition "rootfs_data" created automatically, ofs=0x300000, len=0x100000

[ 0.630000] 0x000000300000-0x000000400000 : "rootfs_data"

[ 0.650000] eth0: done loading

[ 0.660000] rt2880_wdt 10000120.watchdog: Initialized

[ 0.680000] TCP: cubic registered

[ 0.680000] NET: Registered protocol family 17

[ 0.690000] 8021q: 802.1Q VLAN Support v1.8

[ 0.730000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.

[ 0.750000] Freeing unused kernel memory: 200K (8029e000 - 802d0000)

[ 8.560000] usbcore: registered new interface driver usbfs

[ 8.570000] usbcore: registered new interface driver hub

[ 8.580000] usbcore: registered new device driver usb

[ 8.600000] rt2880-pinmux pinctrl.1: request pin 10 (io10) for pio:10

[ 8.600000] rt2880-pinmux pinctrl.1: request pin 0 (io0) for pio:0

[ 8.610000] dwc_otg: version 2.72a 24-JUN-2008

[ 8.620000] dwc_otg: Core Release: 2.66a

[ 8.830000] dwc_otg: Periodic Transfer Interrupt Enhancement - disabled

[ 8.840000] dwc_otg: Multiprocessor Interrupt Enhancement - disabled

[ 8.850000] dwc_otg: Using DMA mode

[ 8.860000] dwc_otg: Device using Buffer DMA mode

[ 8.870000] dwc_otg 101c0000.otg: DWC OTG Controller

[ 8.880000] dwc_otg 101c0000.otg: new USB bus registered, assigned bus number 1

[ 8.900000] dwc_otg 101c0000.otg: irq 26, io mem 0x101c0000

[ 8.910000] dwc_otg: Init: Port Power? op_state=1

[ 8.920000] dwc_otg: Init: Power Port (0)

[ 8.930000] usb usb1: no of_node; not parsing pinctrl DT

[ 8.930000] hub 1-0:1.0: no of_node; not parsing pinctrl DT

[ 8.930000] hub 1-0:1.0: USB hub found

[ 8.940000] hub 1-0:1.0: 1 port detected

[ 8.950000] leds-gpio gpio-leds.3: pins are not configured from the driver

[ 8.960000] rt2880-pinmux pinctrl.1: request pin 9 (io9) for pio:9

[ 8.960000] rt2880-pinmux pinctrl.1: request pin 13 (io13) for pio:13

[ 8.960000] rt2880-pinmux pinctrl.1: request pin 11 (io11) for pio:11

[ 11.570000] jffs2: notice: (277) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 9 of xref (0 dead, 2 orphan) found.

[ 13.950000] NET: Registered protocol family 10

[ 13.980000] nf_conntrack version 0.5.0 (461 buckets, 1844 max)

[ 14.050000] Loading modules backported from Linux version master-2014-03-31-1-0-g5c109d2

[ 14.070000] Backport generated by backports.git backports-20140221-0-g8e94650

[ 14.170000] xt_time: kernel timezone is -0000

[ 14.230000] cfg80211: Calling CRDA to update world regulatory domain

[ 14.300000] cfg80211: World regulatory domain updated:

[ 14.310000] cfg80211: DFS Master region: unset

[ 14.310000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)

[ 14.330000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)

[ 14.350000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)

[ 14.370000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)

[ 14.380000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)

[ 14.400000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)

[ 14.420000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)

[ 14.480000] PPP generic driver version 2.4.2

[ 14.490000] NET: Registered protocol family 24

[ 14.560000] rt2800_wmac 10180000.wmac: failed to load eeprom property

[ 14.570000] ieee80211 phy0: rt2x00lib_request_eeprom_file: Info - Loading EEPROM data from 'soc_wmac.eeprom'.

[ 14.600000] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 2872, rev 0200 detected

[ 14.610000] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected

[ 14.630000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'

[ 25.240000] device eth0.1 entered promiscuous mode

[ 25.250000] device eth0 entered promiscuous mode

[ 25.270000] br-lan: port 1(eth0.1) entered forwarding state

[ 25.280000] br-lan: port 1(eth0.1) entered forwarding state

[ 26.220000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready

[ 27.280000] br-lan: port 1(eth0.1) entered forwarding state

[ 188.380000] usb 1-1: new low-speed USB device number 2 using dwc_otg

[ 188.610000] usb 1-1: no of_node; not parsing pinctrl DT

With commands "fowsr -d" and "fowsr -b" I'm getting 0 values everywhere.

Any ideas how to solve it?

Thanks and Regards,

Michal

Reply all

Reply to author

Forward

0 new messages