Clear the weather stations memory.

Marcus Löfstrand

unread,

Feb 11, 2013, 5:43:25 PM2/11/13

to fo...@googlegroups.com

Hi!

Is there a command to clear the weather stations memory with a command? When I have to reboot my OpenWrt-unit, it dumps the weather stations memory to WU, but the barometric value is almost always of and messes up the data and graphs.

/// Marcus

Leon Botha

unread,

Feb 23, 2013, 8:10:29 AM2/23/13

to fo...@googlegroups.com

Hi Marcus

The only way i know is to remove the batteries??
I do not see any command that can be send to "Reset" the counter in the "Weather station Memory Map". It does NOT mean that there is not one....

By the way, can you assist me with getting my "FOWSR" to work on Openwrt, i have been unable to get it working

Leon

Lee

unread,

Mar 3, 2013, 5:42:12 PM3/3/13

to fo...@googlegroups.com

I had some issues with the *.sh files containing ^M because it was last edited in windows.

I used vi to remove them and it started working.

I've got an issue with crazy values being read from the device. The LCD screen shows normal values for the rain gauge by fowsr seems to be reading crazy values and I'm not sure where from. I might remove the batteries to clear the memory.

cheers,

Lee.

James Nichols

unread,

Sep 15, 2013, 2:43:34 AM9/15/13

to fo...@googlegroups.com

I have a WH2081. To clear the memory press the enter button on the display twice, then "CLEAR" and the memory circle flashes, then hold enter until the flashing stops. Thanks for the tip about the ^M. I was stuck and couldn't get it to work. Looks like my next place to be stuck is "hub 1-0:1.0: connect-debounce failed, port 1 disabled"