Asus X299 Deluxe

0 views

Skip to first unread message

Rosy Demorest

unread,

Aug 3, 2024, 6:08:11 PM8/3/24

to foodssudeemat

I configured the BIOS to enable Thunderbolt, but there were many settings and I have no idea which ones are the correct for the card to work. There were several drivers I tried downloading but apparently the order matters?

I have a x299 WS Server Board and tried to built in an ASUS Thunderbolt ex3 Card to power up my G-TECH SSD Raid. Drivers are up to date, all cables are proper connected, Bios is set correct. Unfortunately my G-Tech doesnt power up anymore. It did once I installed and started everything for the first time. Could run G-Tech Utility and see the drive. After a restart it didnt work anymore up to know (did several restarts). Whats the point?

Yep same with me - it worked a couple times - I needed to change where the card was installed in the bios on my asus x299 deluxe (which seems to have lost complete support by Asus now as the web page for the drivers etc for it has vanished!) from card pcie slot 1 to 4. I have two thunderbolt drives - the samsung x5 ssd and also a g tech 6tb one. both recognised in the software but both never show up in windows. Windows says all latest drivers are installed etc. They show up in Devices and printers though. I am really hoping i dont need to replace the motherboard. I have contacted support so will reply back here if the issue is solved.