Sd Mini Mmc Rs 4.0 Driver Download PORTABLE
Tiziano Savard
My Game: I'm a 4.3 handicap and I lean on my irons to make up for some other weak parts of my game, in particular getting off the tee in a safe spot, but with an iron that can still attack pins (so this club was a great one for me to test). My driver SS is 110-113 depending on the day. My natural shot shape is a fade, but with irons I am comfortable shaping various shots based on the condition. I play mostly in Michigan, so the season is limited, but there are lots of great tracks to test various parts of my game.
Ball Flight: Stronger than my 3 wood and a wonderful tee option. I decided to take the driver out of the bag for this test, but I can see how this COULD live with a driver in the bag as well as a "fairway finder". Off the deck was a lower flight, but plenty of carry to go after par 5's in 2. Overall a strong flight that has more spin than my driver, but never ballooned into the stratosphere. (NOTE: To be fair to this club, I swapped the shaft to an Alta CB 65 X to better fit my swing. I think hitting stock shafts is a bit silly if you know they're a bad fit for you.)
Overall: I'm not 100% convinced this can REPLACE my driver, but I can 100% see how someone on the outs with their driver would choose to use this as a safer tee shot and a go-getter on par 5's from the fairway.
I loved the look of the 300 mini because out of the box it just felt "familiar", but the BRNR Mini beats it for me. TM went a new direction with the BRNR to compliment the Stealth 2 lineup (Gloss crown instead of matte, more subtle carbon fiber weave, and bold sole graphics).
During my range and course play, the Mini Driver did find more fairways for me. Ball flight was definitely stronger than a 3 wood off the tee and I was only losing maybe 10-15 yards off my driver (on average). Compared to my driver, the BRNR Mini just didn't have that "extra gear". I really enjoyed playing it, but when I needed to crunch one I just couldn't get a lot more out of it compared to an average swing. For two reasons I took away one star. First, I felt like I just couldn't squeeze more distance out of it, but it's important to know that I was pleased with distance nonetheless. Second, I could really only play a fade off the deck. Wasn't too limiting, but I quickly learned the draw from the fairway wasn't going to happen for me.
Flight was strong, but definitely could tell there was higher spin than my driver. I'm guessing I was around 3000 RPM vs my Driver standard of about 2300. Where I saw that impact was a bit in carry, but more so in roll out. The BRNR Mini landed and hopped once before stopping, so if you're hitting this club it's 100% carry in my book. My Driver gets me about 280-290 on average and I found the BRNR Mini getting me out there 270 consistently, but again, not much more. NOTE: I didn't have my launch monitor to validate data
Off the deck I was IMPRESSED to say the least. At address you feel good, but at the same time the face is deep enough to make you wonder if you're just going to blade a missile that goes 10 ft off the ground. I found the speed pocket to produce a much better ball flight than expected. Don't get me wrong, I wasn't getting this more than 50' in the air even on good hits, so it definitely has a stinger flight off the deck, but dang it works! I was able to get a more predictable off the deck result by playing a fade. A few times I tried to draw the ball around a small dogleg and the flight was just harder to flight into the air. If you play a natural draw, I would encourage you to hit this off the deck in your fitting just so you know how this fits in the bag for various shots. If this is ONLY a tee ball club, I'd be worried about it wasting a spot in the bag if you have any confidence in your normal driver.
vs. 300 Mini: I really loved the 300 mini off the tee, but hated it off the deck. It truly was a driver replacement for that reason, but with the BRNR Mini it actually has me wondering if this should have a spot in the 14 club lineup just because of how well it goes off turf! Off the tee I found the BRNR to be a "little" easier to find the sweet spot compared to the 300, but again the main difference is when you're hitting if off the deck. Also why I liked the versatility of the Original One over the 300 Mini as well, but the BRNR Mini is definitely an improvement for forgiveness compared to the Original One.
PLAY IT OR TRADE IT: Jury is still out on this, but if I had to choose today, I would not choose to put this in my bag. A year ago, when I couldn't find the ocean from the beach off the tee, I would've given anything for this. But, since then I've worked on my driver and have gotten it to a place where we have a healthy trusting relationship lol. Here's how I'd break it down for my decision:
Upon imaging a Surface Laptop 2 with our basic image from the older Surface laptop model the Surface Hid Mini Driver driver fails to power and thus the keyboard doesn't work. if I revert back to 03/27/2017 driver it works fine... but then the laptop automatically updates itself to the latest version that brakes again. I have blocked the update in WSUS.
Is anybody aware of a fix for the latest driver? Does the PC somehow think its a Surface Laptop 1st gen and somehow downloading the incorrect driver possibly? I also downloaded the latest firmware/driver package from MS and tried that version and it also doesn't work. Seems to be the same exact version that gets downloaded from Windows Update.
@WC_KStil did you ever get the specific version of the driver that works? I keep running into this issue every update cycle. I have a surface laptop 2 and the "Surface Hid Mini Driver" flakes out every update. I've tried the all of the drivers from Download Surface Laptop 2 Drivers and Firmware from Official Microsoft Download Center :
I've tried uninstalling the driver and re-installing but that never seems to work, even disabling the driver and re-enabling doesn't work. I'm not sure what happens in UEFI entry, but that seems to make it work again for me. Beware - your mileage may vary!!! This seems to be a very common issue but different tasks seem to work for different people. I sure hope Microsoft can fix this as it is a pain as it usually happens when I really need to get some work done!
Off the Deck: Not great. Sure, it's better than you would expect, and you can pop the occasional shot pretty well. But it's inconsistent. In 80 percent of cases, I would do better by flushing my 4/5 wood. But the mini is a second tee club for me, not really a fairway wood, so I would only use it off the deck in rare circumstances.
One full round with mine so far. Hit it from the tee 11x. Super happy with the results. High and long and pretty darn straight (if anything I left a few out to the right a bit). I had the Original One and this looks better and sounds better. Overall results are similar, though with the stock shaft, the 300 seems to launch higher. I do have an Evenflow Black on the way (picked up on the BST) to see if I can lower the flight some (I don't really want to mess with the loft, but will if I have to). I can usually get along okay with stiff, stock shafts (driver SS is around 95ish now), but this one does feel like it has more kick than I'm used to (I do typically like a stiffer tipped shaft....Manolo says don't be nasty). Looking forward to the chance to hit her off the deck a few times (the opportunity never came up during Sunday's round).
Doesn't have to be an oversized 3 wood. The 11.5 model can definitely be classified as a small headed driver. I intend to use mine turned down two settings lower to make it effectively roughly a 10.2 driver. I will be installing a driver length Ventus Blue Velocore 6S shaft. The reason some of us want a driver replacement is so that we have a driver that we can work the ball with greater ease. The 460cc/440cc drivers makes it difficult to draw and fade balls on command, at least consistently that is. I have demo'd the 300 Mini 11.5 driver with a TM Ventus Blue 5S driver shaft as well as the stock stiff shaft and both allowed me to work the ball much better and much easier than my current gamer (Taylormade M3 440cc 9.5). Distance wise the 300 Mini actually had a little better numbers across the board, including overall distance and carry.
I would personally not use this driver as a 3 wood replacement.
Hit a ton of balls with the Mini and with my driver (Mizuno STZ at 45 in.). Ball speeds were very consistent with both clubs, averaging 155-158 with the mini and 160-164 with driver. So still enough distance with the mini for strong tee shots but enough separation with driver to warrant keeping both in the bag. I also generally hit straight-to-fade with the driver whereas the Mini provides the easy draw option, which is the main reason I bought it -- a second tee club that can produce a different shot shape than driver.
It did occur to me that someone could bag two mini drivers -- the 11.5 cranked down to 9.5 with the face wide open for a fade bias and the 13.5 set neutral, which is naturally draw biased (for me). I wonder how far off my numbers would be with a 9.5 mini relative to my 9.5 Mizuno driver.
A. You can use it from the fairway. That's the entire point of this club. Is that it's a small driver with the ability to hit off the deck. That's what the V-Sole is for. Watch any review of the club, and they'll be hitting it off the deck with good results.
B. You look at it as $400 for an oversized 3 wood. I look at it as driver that is $130 cheaper than the SIM line.