Din 16742 Tg4

[Irmgard Rossie]

cThe material of the moulded part is bindingly defined by the moulded part designer upon order placement. He therefore establishes the basis for determining the moulding shrinkage. After order placement, calculated values in respect to the moulding shrinkage shall be agreed between the moulded part manufacturer and toolmaker or tool designer, whereby external experience (e. g. moulded part compound manufacturer) may have to be utilised.

Depending on the moulded part compound specification, moulded part design and tool layout, the processing of the plastics has a significant effect on the dimensional stability of the moulded parts. The processing machines of the primary shaping method are complex thermodynamic-rheological compound systems, which are still processed and optimised empirically despite highly developed manufacturing technology.

Dimensionally-relevant properties of the plastics include the extreme range of the type-dependent stiffness or hardness as well as the moulding shrinkage. Unsteady and inhomogeneous tool and moulding temperatures in conjunction with orientations of microstructures and additional tolerances due to flow systems lead to property anisotropies, which cause a greater or lesser deformation (warpage, distortion, contortion) of the moulded parts. Furthermore, wall thickness differences or mass concentrations / material concentrations can be possible causes for deformation. Form, location and angle deviations are therefore connected in highly complex ways, which make standardisation much more difficult in comparison to metals.

The deviations from the nominal dimensions and the subsequent processing of our parts are generally dependent on the manufacturing or production processes used. DIN ISO 16742 applies for injection moulding, and the tolerance group TG 6 applies for our thermoplastics. DIN 12020-2 applies for the production of aluminium profiles. If the parts are mechanically processed, DIN ISO 2768m always applies.

All dimensions The procedures described in ISO 16742:2014 apply to sampling of iron ore that is transported in moving streams as a slurry. These streams can fall freely or be confined in pipes, launders, chutes, spirals, or similar channels.

Almost done!

You are only one step away from joining the ISO subscriber list. Please confirm your subscription by clicking on the email we've just sent to you. You will not be registered until you confirm your subscription. If you can't find the email, kindly check your spam folder and/or the promotions tab (if you use Gmail).

16740. When the recount has been completed in the manner requiredby Article 4 (commencing with Section 16460) of Chapter 5, andArticle 3 (commencing with Section 16640) of Chapter 7, all thejudges who took part, if more than one, shall assemble and make thedecision of the court. If there is any difference of opinion, amajority of the judges shall finally determine all questions, andgive a separate decision or judgment in each contest.16741. A certified copy of the judgment shall be served upon theelections official and may be enforced summarily in the same manneras provided in Section 13314.16742. If the contest proceeds in more than one county, and thenominee is to be certified by the Secretary of State from thecompilation of election returns in his or her office, the judgment ineach county in which there has been a contest shall show what, ifany, changes in the returns in the office of the Secretary of Staterelating to that county ought to be made. Certified copies of thejudgments shall be served upon the Secretary of State. He or sheshall make the changes in the record in his or her office as eachjudgment requires, and conform his or her compilation and his or hercertificate of nomination accordingly.

Disclaimer: These codes may not be the most recent version. California may have more current or accurate information. We make no warranties or guarantees about the accuracy, completeness, or adequacy of the information contained on this site or the information linked to on the state site. Please check official sources.

EconPapers FAQ

Archive maintainers FAQ

Cookies at EconPapers Format for printing The RePEc blog

The RePEc plagiarism page Misallocation, Economic Growth, and Input-Output EconomicsCharles JonesNo 16742, NBER Working Papers from National Bureau of Economic Research, IncAbstract:One of the most important developments in the growth literature of the last decade is the enhanced appreciation of the role that the misallocation of resources plays in helping us understand income differences across countries. Misallocation at the micro level typically reduces total factor productivity at the macro level. Quantifying these effects is leading growth researchers in new directions, two examples being the extensive use of firm-level data and the exploration of input-output tables, and promises to yield new insights on why some countries are so much richer than others.JEL-codes: E2 O1 (search for similar items in EconPapers)

Date: 2011-01

Note: EFG PR

References: View references in EconPapers View complete reference list from CitEc

Citations: View citations in EconPapers (74) Published as "Misallocation, Input-Output Economics, and Economic Growth" in D. Acemoglu, M. Arellano, and E. Dekel, Advances in Economics and Econometrics, Tenth World Congress, Volume II, Cambridge University Press, 2013.Downloads: (external link)

(application/pdf)Related works:

This item may be available elsewhere in EconPapers: Search for items with the same title.Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/TextPersistent link: :nbr:nberwo:16742Ordering information: This working paper can be ordered from

Statistics for this paperMore papers in NBER Working Papers from National Bureau of Economic Research, Inc National Bureau of Economic Research, 1050 Massachusetts Avenue Cambridge, MA 02138, U.S.A.. Contact information at EDIRC.

Bibliographic data for series maintained by (Obfuscate( 'nber.org', 'feenberg' )). var addthis_config = "data_track_clickback":true; var addthis_share = url:" :nbr:nberwo:16742"Share This site is part of RePEc and all the data displayed here is part of the RePEc data set. Is your work missing from RePEc? Here is how to contribute. Questions or problems? Check the EconPapers FAQ or send mail to Obfuscate( 'oru.se', 'econpapers' ). EconPapers is hosted by the School of Business at rebro University.

3a8082e126