Fwd: Ni-Al Nanofoil Data Sheet
Oren Stoelting
From: Jacques Matteau <jmat...@indium.com>
Date: Tue, Jun 4, 2013 at 8:05 AM
Subject: RE: Ni-Al Nanofoil Data Sheet
To: "ohsto...@ucdavis.edu" <ohsto...@ucdavis.edu>
No worries….Al/Pd
Jacques Matteau
Global Sales Manager - Nanofoil and Nanobond
- Thin Film and Solar Products
Indium Corporation
751 Laurel St. #203
San Carlos, CA, 94070
(M) 315 765 1148
Headquarters:
Indium Corporation
34 Robinson Road
Clinton, NY, 13323
tele: 315 853 4900 x 2021
From: Oren Stoelting [mailto:ohsto...@ucdavis.edu]
Sent: Monday, June 03, 2013 9:04 PM
To: Jacques Matteau
Subject: Re: Ni-Al Nanofoil Data Sheet
Sorry, my emails seem to have gotten a bit jumbled. is 40 W/mK your estimate for the thermal conductivity of the Al-Pd or the Ni-Al?
Thanks,
-Oren
On Mon, Jun 3, 2013 at 4:54 PM, Jacques Matteau <jmat...@indium.com> wrote:
Just for kicks, there is a new data sheet….attached.
Oren,
Good to hear from you again. Best number I could come up with from those I spoke with was ~40W/mK
Hope that helps,
Jacques Matteau
Global Sales Manager - Nanofoil and Nanobond
- Thin Film and Solar Products
Indium Corporation
751 Laurel St. #203
San Carlos, CA, 94070
(M)
315 765 1148
Headquarters:
Indium Corporation
34 Robinson Road
Clinton, NY, 13323
tele: 315 853 4900 x 2021
From:
mike....@agilent.com [mailto:mike....@agilent.com]
Sent: Friday, May 31, 2013 1:30 PM
To: ohsto...@ucdavis.edu
Cc: Jacques Matteau
Subject: Ni-Al Nanofoil Data Sheet
Hi Oren,
I found an old data sheet for the Ni-Al Nanofoil that has a thermal conductivity value. However, I don’t know if this is the as deposited or reacted material. I never saw a data sheet for the Pd-Al. It may be that Omar Knio knows the thermal conductivity value for the Pd-Al material and may be able to confirm the Ni-Al value.
Best Regards,
Mike
From: Oren Stoelting [mailto:ohsto...@ucdavis.edu]
Sent: Friday, May 31, 2013 12:46 PM
To: POWERS,MIKE (A-Sonoma,ex1)
Subject: Re: Gold-Indium Phase Diagram
Yes, that's pretty much the point. I'm curious to see if the Pd-Al or the Ni-Al has a higher thermal conductivity after joining. The nanofoil is such a large portion of the joining thickness, it seems silly to simply discount its thermal conductivity contribution. I'll forward this question to Jacques then,
Thanks!
-Oren
On Fri, May 31, 2013 at 12:16 PM, <mike....@agilent.com> wrote:
Hi Oren,
I’m not sure what you are asking for. If you are talking about thermal conductivity testing on reacted Pd-Al and Ni-Al Nanofils done by Indium or RNT, I don’t know if that has ever been done. Am I understanding your question correctly?
mp
From: Oren Stoelting [mailto:ohsto...@ucdavis.edu]
Sent: Friday, May 31, 2013 12:15 PM
To: POWERS,MIKE (A-Sonoma,ex1)
Subject: Re: Gold-Indium Phase Diagram
Many thanks!
Would you also happen to have access to measurements of the thermal conductivity of the reacted intermetallics from the Pd-Al and the Ni-Al nanofoils?
-Oren
On Wed, May 29, 2013 at 8:24 AM, <mike....@agilent.com> wrote:
Hi Oren,
Try this site…it is a clearinghouse for online phase diagrams.
http://www.crct.polymtl.ca/fact/documentation/All_Figs.htm
mp
From: Oren Stoelting [mailto:ohsto...@ucdavis.edu]
Sent: Wednesday, May 29, 2013 1:45 AM
To: POWERS,MIKE (A-Sonoma,ex1)
Subject: Gold-Indium Phase Diagram
Mike,
For once, it seems as though the internet has failed me. I have been looking for some time for a Gold-Indium phase diagram for the final report. Do you have access to such a diagram, perchance? Might Jacques?
Thanks!
-Oren
***This email, its content, and any files transmitted with it, are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you are not the intended recipient, please contact the sender by return and delete the material from
any computer. Any review, retransmission, dissemination, or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited.
Messages sent via this medium may be subjected to delays, non-delivery, and unauthorized alteration. This email has been prepared using information believed by the author to be reliable and accurate, but Indium Corporation makes no warranty as to accuracy or
completeness. Indium Corporation does not accept responsibility for changes made to this email after it was sent. Any opinions or recommendations expressed herein are solely those of the author. They may be subject to change without notice.***
***This email, its content, and any files transmitted with it, are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you are not the intended recipient, please contact the sender by return and delete the material from any computer. Any review, retransmission, dissemination, or other use of, or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited.
Messages sent via this medium may be subjected to delays, non-delivery, and unauthorized alteration. This email has been prepared using information believed by the author to be reliable and accurate, but Indium Corporation makes no warranty as to accuracy or completeness. Indium Corporation does not accept responsibility for changes made to this email after it was sent. Any opinions or recommendations expressed herein are solely those of the author. They may be subject to change without notice.***