Shell Alvania Rl3 Grease Specifications

0 views

Skip to first unread message

Candi Ruman

unread,

Aug 3, 2024, 5:44:57 PM8/3/24

to florexhepunc

In grease-lubricated applications, on the other hand, it is usually impossible to remove all of the old grease from the application when changing products. Grease suppliers typically advise their customers to purge as much of their grease as possible through the grease-dispensing system and application to displace the previously used product.

Unlike the compatibility of oils, which is most often related to interactions of the additives in the products (and sometimes the nature of the base fluids themselves), the compatibility of greases is most often related to the thickener types of the products to be mixed (although base fluid compatibility is also important).

Grease compatibility is often confusing to grease users, even though most grease manufacturers produce compatibility charts. This is because the charts from the various manufacturers often disagree with one another on certain thickener-type combinations. In bygone days, when simple soaps and clay were the primary thickener types, compatibility was relatively straightforward.

To add to the confusion, there are some grease specifications that are based solely on grease performance without regard to grease composition. If greases of different thickener types (both of which meet the performance requirements of the specification) get mixed in service, dire consequences can result.

The compatibility of polyurea greases with soap-thickened greases is probably the most debated area of grease compatibility today. Greases based on simple lithium soaps (lithium stearate or lithium 12-hydroxystearate) and lithium complex soaps (containing simple soap and a complexing agent, such as lithium azelate) may or may not be compatible with polyurea greases.

This is because of the wide variety of materials that can be reacted to form a thickener that is termed polyurea. Some polyurea thickeners are completely compatible with lithium and lithium complex thickeners, while other polyurea thickeners are definitely incompatible with the lithium and lithium complex thickeners.

It is necessary to perform compatibility testing on combinations of these greases to determine whether the greases can be mixed in service. It is incumbent upon the user of the greases to verify compatibility when making a change from one product to another. Most grease suppliers have data on certain grease combinations or are willing to perform the required testing for their customers.

To help users understand the implications of mixing greases, ASTM International (formerly the American Society for Testing and Materials) Committee D02.G developed ASTM D6185 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases in 1997. This document details the procedure for evaluating the basic compatibility of greases, which is determined by measuring the dropping point, the mechanical stability and the change in consistency of the mixture upon heating.

Once two greases are determined to be compatible in the above three areas, further testing to determine the impact on other performance parameters of the products may be warranted. Any test that is designed for measuring grease performance may be used on a mixture of greases to determine the effect on that parameter when the greases are mixed.

The tests that are conducted should be agreed upon between the user and grease supplier to assure that the properties that are critical to the proper function of the product in service are covered. The full text of ASTM D6185 is available from ASTM International at www.astm.org.