Is this output correct?

[Shivatejas B.R.]

Dear Friends,
                  Upon executing osld_tx, I get the following output:

Running...OK!
>>
-------- LTE Setup ---------
 BW:        6 PRB
 CFI:        1
 Ports:        1
 CP mode:    Normal
 Cell ID:    0
 PDCCH #0:    2 CE, 18 REGs

 --- PDSCH #0: ---
 Num RBG:    6 RBG
 RBG_Mask:    0x3f
 TBS size:    1096 bits
 MCS:        9
 Avg bitrate:    0.99 Mbps
 Avg SE:    1.35 bits/symbol
 Modulation:    QPSK


On executing "osld_rx", I see the following

Running...OK!

>> Total blocks: 900    Total errors: 0    BLER=0
Total blocks: 1800    Total errors: 0    BLER=0
Total blocks: 2700    Total errors: 0    BLER=0
Total blocks: 3600    Total errors: 0    BLER=0
Total blocks: 4500    Total errors: 0    BLER=0
Total blocks: 5400    Total errors: 0    BLER=0
Total blocks: 6300    Total errors: 0    BLER=0
Total blocks: 7200    Total errors: 257    BLER=0.0356944
Total blocks: 8100    Total errors: 998    BLER=0.12321

Is everything running correctly?

Thanks,
Shiv

[Vuk Marojevic]

It seems so to me.
What do you think?
Try running the TX part for longer or shorter time and see what happens at the receiver.
Vuk

--
You received this message because you are subscribed to the Google Groups "ALOE" group.
To unsubscribe from this group and stop receiving emails from it, send an email to flexnets+u...@googlegroups.com.
To post to this group, send email to flex...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/flexnets/1231098c-2364-44de-acb2-f18dbd8c353a%40googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

[ra]

Hi all,

When I run osld_rx_file.app using output.bin generated by osld_tx_file.app, I get BLER=1. I had to hard code as index=1 as mentioned in the email thread here since I had same issue even when I am rx-ing from file. Any ideas what could be wrong. 

Ra.