Clogging

[scout2400]

Hi,

Loving my Filamet bronze, but I'm using it per the directions,but having an issue with the nozzle clogging and getting almost crumbling when I get an inch through the print.Any thoughts?

Chris

[jchambe...@go.ccad.edu]

would be happy to help but could you give me a bit more details what do you mean inch through the print and what size head are you using and can you give me the lot number from your real of bronze thanks

[jchambe...@go.ccad.edu]

you can bake the old filamet at 170 for for 90 minutes this might help the brittleness with the bronze you have presently as soon as we have more bronze manufactured i will send some more

[Filamet™ and The Virtual Foundry]

could you email me your shipping info to jere...@thevirtualfoundry.com and i will get a couple samples mailed out to you

[Christopher Sweeney]

Done,thanks.

Sent from my iPhone

--

---
You received this message because you are subscribed to the Google Groups "Filamet™ and The Virtual Foundry" group.
To unsubscribe from this group and stop receiving emails from it, send an email to filamet+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/filamet/1c981a0e-a877-4bc3-b8f9-716680d4aaba%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Sam P]

I've tried to do this for the copper and didn't have any luck-- afterward filament was still still too brittle to even load!  Would appreciate more instruction...

On Monday, December 5, 2016 at 9:07:45 PM UTC-6, jchambe...@go.ccad.edu wrote: