Help Minor scsi Prob

[Bob Backsrom]

I have Installed Nt4.0 Workstation On My System. This Is the Current
Situation. I have A Adaptec 1510A Scsi Card with 2 Cd roms attached to
it A Phillips CDR 2600 and A Chinon CDR. Currently The setings I Have
The Scsi Card At Are 140h-15eh and the IRQ is 11. but when i add the
appropiate driver in Nt4.0 for the card and I restart my machine it
freezes in the blue starup screen. I wait for 5 minutes and nothing
happens. Can Anyone help.....

Thanks
bob...@mail.sgi.net

[Clem Dye]

I'm running my box under NT3.51 and have an Adaptec 1515. I have the card set
to IRQ12, addr. 340h. A lot of motherboards use IRQ11 for PCI bus management,
graphics cards etc.

Try a different IRQ and/or address and see what happens. If you find that NT
boots, but can't see the card, there's a TechNet article which tells you how
to force the SCSI driver to use a different IRQ - sorry I don't have the QNote
number.

Good luck.

Clem

In article <35647308...@mail.sgi.net>, bob...@mail.sgi.net says...