Выпущен в свет SqaFix 0.99a8
Pete Kvitek
Взять можно на http://www.kvitek.com/fido/sqaf99a8.zip или фрекнуть с 2:5020/6
по имени SQAF99a8.ZIP
Вот изменения по сравнению с предыдущей версией:
14/Jan/00, v0.99 -- maintenance release
a8 - Added Win32 build to the distribution. From now on this is
the primary build for debugging and testing, all other flavours
just pass automated acceptance tests.
- New keyword "IdlePassthruIgnorePassive" will force program to
ignore passive downlinks when checking if the passthru area
is an idle one.
- NewAreaRefuse keyword will now accept reference area mask
files just like ForwardRequestRefuse etc. Thanks Den.
- Fixed problem with readonly nodes not being properly set
for autocreate areas. Thanks Andrey.
- SqaFix will not forward request if requested area matches
NewAreaRefuse mask for the uplink node. Thanks Piter.
- SqaFix will now refuse to create areas with tags specified
in NetArea, BadArea and DupeArea keywords in Squish.cfg --
this should prevent those terrible disasters when message with
AREA:NETMAIL somehow falls into BadArea and then EchoArea
with NETMAIL area tag gets autocreated.
- SqaFix will now use the first instance of AREA: kludge just
like Squish does. Previous versions used the last instance and
this caused problems with autocreate messages which somehow
had multiple AREA: kludges. Thanks Konstantin.
- Fixed problem with <no description> being set for %avail
requests even if DefaultAreaDescr is set to "".
Thanks Alexander.
- Fixed problem with readonly areas not being processed with
%ACTIVE/%PASSIVE requests.
- Fixed problem which sometimes caused trap when updating
Squish.cfg Pack lines close to 127 characters. Thanks Alexey.
- SqaFix will not automatically allow area autocreation for the
node, which is specified as an uplink node. You need explicitely
specify +A flag for nodes, which you want to forward requests
to.
- Added code to always build the full paths before comparing
them. This should prevent problems when new areas are sometimes
created with duplicate area path if NewAreaPath is fully
qualified but some of the area paths are not or vise versa.
- Added code to skip leading 'Password' keyword in Password List
lines. So now you can specify Squish config files in
'PasswordList'keyword. Thanks John.
- Added code which will prevent processing of any
message generated by SqaFix during a single run in order
to prevent endless reply loopscaused by erroneus setups.
- Added more strict subject line checking to prevent
endless reply loops. Any message to SqaFix which does not
have subject line matching <password>[ -?[...]] pattern will
be ignored.
- Fixed problem with max rescan limit +R[nnn] not being set
for the nodes if defined in DefaultNodeFlags keyword.
- Fixed minor cosmetic bug with extra empty lines added
in original message text printout in remote request reports
when the original message lines ended with 0d/0a.
Thanks Dmitry.
- Added console command 'Rules' which allows you to send rules
to the specified node for all areas matching the given mask.
- Added console command 'DumpNode' to dump the node information.
If no nodes are specified, then all the existing nodes info
will be dumped.
- Added console command 'DumpUplink' to dump the uplink
information. If no uplinks are specified, then all the
existing uplinks info will be dumped.
- Added console command 'DumpArea' to dump the area information.
If no areas are specified, then all the existing areas info
will be dumped.
- Added fake autocreation mode. Run the command:
SqaFix AutoCreate <nodeaddr> <area> -X
to see what will happen if <nodeaddr> will create <area>.
This command helps to test your new area creation rules.
07/May/98, v0.99 -- bugfix release
a7 - Added 'PasswordList' keyword which allows you to specify
Пока,
\Pete