Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

S:SPICE Modell MOSFET

83 views
Skip to first unread message

Peter Bolch

unread,
Feb 27, 1995, 3:54:43 PM2/27/95
to
Hallo,


ich suche nach SPICE Modellen fuer Dual Gate MOS-Fets, vorzugsweise fuer den
BF981 oder vergleichbare Typen.


Peter


Lothar Schmidt

unread,
Mar 2, 1995, 6:36:00 AM3/2/95
to
Hallo Peter,

> ich suche nach SPICE Modellen fuer Dual Gate MOS-Fets,
> vorzugsweise fuer den BF981 oder vergleichbare Typen.

...genau den konnte ich hier nicht finden, aber folgendes kannst Dir ja
anschau'n:
(das kommt aus der Standardmaessigen eval.lib, die Du sicher auch hast... ich
haette da aber noch eine PWRMOS.LIB Copyright by Microsim '85-'90 ... ist etwas
gross fuer als Mail zu verschicken...)

*----------------------------------------------------------- * Library of MOSFET
model parameters (for "power" MOSFET * devices)
*
* This is a reduced version of MicroSim's power MOSFET model * library.
* You are welcome to make as many copies of it as you find * convenient.
*
* The parameters in this model library were derived from the * data sheets for
* each part. Each part was characterize using the Parts * option.
* Device can also be characterized without Parts as follows:
* LEVEL Set to 3 (short-channel device).
* TOX Determined from gate ratings.
* L, LD, W, WD Assume L=2u. Calculate from input * capacitance.
* XJ, NSUB Assume usual technology.
* IS, RD, RB Determined from "source-drain diode forward * voltage"
* specification or curve (Idr vs. Vsd).
* RS Determine from Rds(on) specification.
* RDS Calculated from Idss specification or curves.
* VTO, UO, THETA Determined from "output characteristics" * curve family
* (Ids vs. Vds, stepped Vgs).
* ETA, VMAX, CBS Set for null effect.
* CBD, PB, MJ Determined from "capacitance vs. Vds" * curves.
* RG Calculate from rise/fall time specification or * curves.
* CGSO, CGDO Determined from gate-charge, turn-on/off * delay and rise time
specifications.
*
* NOTE: when specifying the instance of a device in your * circuit file:
*
* BE SURE to have the source and bulk nodes connected * together, as this
* is the way the real device is constructed.
*
* DO NOT include values for L, W, AD, AS, PD, PS, NRD, or * NDS.
* The PSpice default values for these parameters are taken * into account
* in the library model statements. Of course, you should * NOT reset
* the default values using the .OPTIONS statement, either.
*
* Example use: M17 15 23 7 7 IRF150
*
* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
*
* The "power" MOSFET device models benefit from relatively * complete specifi-
* cation of static and dynamic characteristics by their * manufacturers. The
* following effects are modeled:
* - DC transfer curves in forward operation,
* - gate drive characteristics and switching delay,
* - "on" resistance,
* - reverse-mode "body-diode" operation.
*
* The factors not modeled include:
* - maximum ratings (eg. high-voltage breakdown),
* - safe operating area (eg. power dissipation),
* - latch-up,
* - noise.
*
* For high-current switching applications, we advise that * you include
* series inductance elements, for the source and drain, in * your circuit file.
* In doing so, voltage spikes due to di/dt will be modeled. * According to the
* 1985 International Rectifier databook, the following case * styles have lead
* inductance values of:
* TO-204 (modified TO-3) source = 12.5nH drain = * 5.0nH
* TO-220 source = 7.5nH drain = 3.5-4.5nH
* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
*
.model IRF150 NMOS(Level=3 Gamma=0 Delta=0 Eta=0 Theta=0 + Kappa=0
Vmax=0 Xj=0
+ Tox=100n Uo=600 Phi=.6 Rs=1.624m Kp=20.53u W=.3 L=2u + Vto=2.831
+ Rd=1.031m Rds=444.4K Cbd=3.229n Pb=.8 Mj=.5 + Fc=.5 Cgso=9.027n
+ Cgdo=1.679n Rg=13.89 Is=194E-18 N=1 Tt=288n)
* Int'l Rectifier pid=IRFC150 case=TO3
* 88-08-25 bam creation

.model IRF9140 PMOS(Level=3 Gamma=0 Delta=0 Eta=0 Theta=0 + Kappa=0
Vmax=0 Xj=0
+ Tox=100n Uo=300 Phi=.6 Rs=70.6m Kp=10.15u W=1.9 L=2u + Vto=-3.67
+ Rd=60.66m Rds=444.4K Cbd=2.141n Pb=.8 Mj=.5 Fc=.5
+ Cgso=877.2p
+ Cgdo=369.3p Rg=.811 Is=52.23E-18 N=2 Tt=140n)
* Int'l Rectifier pid=IRFC9140 case=TO3
* 88-08-25 bam creation

*-----------------------------------------------------------

Wenn Du die PWRMOS.LIB willst, ruf mich an... Telfonnr. gibts bei der Auskunft,
Name hast , Wohnort ist Karlsruhe, Strasse ist Augustenburg.

Viel Erfolg bei der Suche nach BF981 (ist in der obigen Lib auch nicht drinne
:(( )

Lo

Wolfram Mueller

unread,
Mar 7, 1995, 3:59:00 PM3/7/95
to
Hallo Lothar Schmidt@2:2476/17.1 !

LS> > ich suche nach SPICE Modellen fuer Dual Gate MOS-Fets,
LS> > vorzugsweise fuer den BF981 oder vergleichbare Typen.

und ich bin dringend auf der Suche nach einem Modell fuer eine DIAC. Keinen
besonderen (die sind ja eh fast alle gleich). Die EVAL.LIB schweigt sich
leider aus und eine andere Bibliothek steht nicht in meinem Zugriff.

LS> Wenn Du die PWRMOS.LIB willst, ruf mich an... Telfonnr. gibts bei der
LS> Auskunft, Name hast , Wohnort ist Karlsruhe, Strasse ist Augustenburg.

Weisst du noch mehr Quellen fuer Modelle und Fragen?

bis bald Wolf (kraeftiger PSPICE-Anwender)

--

# # # E-Mail: wolfram...@p79.vrc.schiele-ct.de
# ## ## Fido..: 2:2476/516.79 Voice/BTX: (49) 721 370880
## ## # ##
# # ### Wolfram Mueller ################################################

Heinz Elbers

unread,
Mar 10, 1995, 10:28:58 PM3/10/95
to
Hallo Wolfram,

WM> Weisst du noch mehr Quellen fuer Modelle und Fragen?
WM> bis bald Wolf (kraeftiger PSPICE-Anwender)

gut zu wissen, ich will mir PSpice auch endlich mal ansehen... ;-)

AD.ZIP 15.01.1991 419KB [000] 353 Spice-Macros von Analog Devices
LIBS.ZIP 10.01.1992 198KB [000] Versch. Librarys fuer Spice
NSC_OPAM.ZIP 02.09.1991 709KB [000] National Semiconductors OP-Amps spice
lib
OPV.ZIP 08.10.1994 1KB [000] Pspice Library (yA741)
SPICE_ML.ZIP 01.11.1994 467KB [000] Analog Devices SPICE Macro-model Library
Release I, 1/94
TEXAS.ZIP 01.06.1989 68KB [000] Spice-Macros von Texas Instruments
TRANS.ZIP 02.03.1995 1KB [000] Pspice Library
(FETs & Bipolare Transistoren)
PSPICFAQ.ZIP 05.05.1993* 59KB [001] Fragen und Antworten zu PSpice
PSPICE_1.ZIP 12.01.1995 18KB [002] Software zur PSpice-Serie, Teil 1,
ELRAD 8/94
PSPICE_2.ZIP 12.01.1995 327KB [002] Software zur PSpice-Serie, Teil 2,
ELRAD 9/94
PSPICE_3.ZIP 12.01.1995 67KB [002] Software zur PSpice-Serie, Teil 3,
enthaelt BOPELRAD.EXE
ELRAD 10/94
PSPICE_4.ZIP 12.01.1995 91KB [001] Software zur PSpice-Serie, Teil 4,
ELRAD 11/94
PSPICE_6.ZIP 24.02.1995 238KB [001] Software zur PSpice-Serie, Teil 6
ELRAD 3/95

Requestlimits: 10 Files 45 min 5 MB
kein Request moeglich zwischen 03:00-06:00 und 17:00-21:00

Magic:
ELO --> Elektronik-Fileliste

Man liest sich...

Heinz

P.S.
Uebers ElectronicNet werden in den naechsten Tagen
einige PSpice-Libraries verteilt.
Infos zum Netz gibt es u.a. bei mir... ;-)

Heinz Elbers

unread,
Mar 10, 1995, 10:43:14 PM3/10/95
to
Hallo Lothar,

Es war einmal der Dienstag, 07 Maerz 1995, Wolfram Mueller
schrieb an Lothar Schmidt folgende Zeilen:

LS> >> ich suche nach SPICE Modellen fuer Dual Gate MOS-Fets,
LS> >> vorzugsweise fuer den BF981 oder vergleichbare Typen.

WM> und ich bin dringend auf der Suche nach einem Modell fuer eine DIAC.
Keinen
WM> besonderen (die sind ja eh fast alle gleich). Die EVAL.LIB schweigt sich
WM> leider aus und eine andere Bibliothek steht nicht in meinem Zugriff.


LS>> Wenn Du die PWRMOS.LIB willst, ruf mich an... Telfonnr. gibts bei der
LS>> Auskunft, Name hast , Wohnort ist Karlsruhe, Strasse ist Augustenburg.

Falls Du Lust hast, kannst Du die Library gern zu mir uploaden.
Ich wuerde sie dann in die Elektronik-Fileechos hatchen...

Man liest sich...

Heinz

0 new messages