Email forwarded - see attached PDF. Jamie Shore
*******************
See attached preliminary manual of FES KOP2300 charger which can
work on US standard 110V AC.
Regards,
Luka
Luka Žnidaršič, director
LZ design, d.o.o.,
Obrtniška 6G | 1370 Logatec |
Slovenia
Tel.: +386 41 449194
email: LukaZnidarsic
skype: limazulu2002
www.LZdesign.siOn Nov 20, 2019, at 6:56 PM, Jeffrey Banks <j...@mtaonline.net> wrote:
--
You received this message because you are subscribed to the Google Groups "FES Owners" group.
To unsubscribe from this group and stop receiving emails from it, send an email to fes-owners+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/fes-owners/3ec0bf21-9442-4697-9984-7e7ccd3225dc%40googlegroups.com.
Dear FES owners,
See section 3.1 of FES KOP 2300 charger manual.
3.1 Mains current limiter
The mains current is limited to max. 13 A for 230 V systems and to
max. 16 A for 120 V
systems. FES KOP2300 automatically detects the mains voltage.
Comment: For 230 V mains voltage and full output power the charger
needs approx. 10.5
A from the socket. At low mains voltage, the mains current would
increase at the same
power, but this would be reduced to max. 13 A. In the short term,
the current can also be
somewhat higher than 13 A in the case of very fast mains voltage
fluctuations.
If the mains voltage drops below approx. 90 VAC, the KOP2300
charger is switched off.
After the mains voltage rises again, the charging is restarted
where it was interrupted.
Regards,
Luka
Luka Žnidaršič, director
LZ design, d.o.o.,
Obrtniška 6G | 1370 Logatec |
Slovenia
Tel.: +386 41 449194
email: LukaZnidarsic
skype: limazulu2002
www.LZdesign.si--
You received this message because you are subscribed to the Google Groups "FES Owners" group.
To unsubscribe from this group and stop receiving emails from it, send an email to fes-owners+...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/fes-owners/c7ca7ea9-c997-4f76-ab39-474bfd140e14%40googlegroups.com.