Tomtom One Battery Replacement

[Ray Kowalewski]

There's no need to buy a whole new device when your battery runs out. Replacing your TomTom GPS battery is easy with our battery replacement kits which include a new highest-capacity battery, tools, and step by step video how-to instructions for many of the internal batteries we offer.

Next, put everything back again in reverse order. You need to make sure the PCB sits correctly in the housing and the on/off switch is positioned properly. Here you see the plastic switch on the housing and how it presses down on a tiny switch on the PCB.

The main flat cable can only be installed holding the two halves together and leaving a little gap. Just press it down. All of these tiny tiny connectors will only fit one way, the correct way. Never use force, if/when correctly positioned they will slide in smoothly.

When separating the two halves of the housing and pressing them back again, you need to be very gently. The screen will crack when twisted! Managed to get it all back together. Fitted the two small screws in the bottom and job done.

If you would like to replace the battery on a TomTom, or any other device for that matter, always check Youtube, just search for (device name) battery replacement. Usually there are dozens of videos out there.

Spanner mate Peter will bring some more and different tools, a hydraulic bottle jack and some fluids. While I type this I realise I forgot to add the EasyBleed kit in case we need to bleed brakes/clutch. Have to add this.