Setting the solid point will report an error

[yiqi CHENG]

Why do I set up a solid point to measure the "Adiabatic SurfaceTemperature" or the "Wall Temperature" on the surface of an obstacle, and some of the points will report errors and others will not?

[Randy McDermott]

From the FDS user guide.

On Tue, Mar 19, 2024 at 8:44 AM yiqi CHENG <l1064...@gmail.com> wrote:

Why do I set up a solid point to measure the "Adiabatic SurfaceTemperature" or the "Wall Temperature" on the surface of an obstacle, and some of the points will report errors and others will not?

--
You received this message because you are subscribed to the Google Groups "FDS and Smokeview Discussions" group.
To unsubscribe from this group and stop receiving emails from it, send an email to fds-smv+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/fds-smv/7f33e897-8737-4dfb-b181-52be0c65a422n%40googlegroups.com.

[Kevin McGrattan]

Probably because the device is near a corner of the obstruction and FDS cannot determine where to assign it.