Please have a look at the discussion here:
https://groups.google.com/g/fds-smv/c/hw07QszXc-0/m/C_vHmFDBBAAJ
From: fds...@googlegroups.com <fds...@googlegroups.com>
On Behalf Of patilank...@gmail.com
Sent: Monday, 22 May 2023 4:31 PM
To: FDS and Smokeview Discussions <fds...@googlegroups.com>
Subject: [fds-smv] Deviation in WFDS and FDS results
EXTERNAL EMAIL: Please be cautious before clicking on any links or downloading attachments.
I run the simulation of C064 in WFDS and FDS and I got highest heat release rate in WFDS is 5.5×105 kw and in FDS 6.8.0 is 2.5×105 kw in boundary fuel model. The input parameters is same. The input parameters was taken from literature of grassland fire experiment. What is the main reason of this deviation?
--
You received this message because you are subscribed to the Google Groups "FDS and Smokeview Discussions" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
fds-smv+u...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/fds-smv/f643ffa8-13c0-461e-81e6-974937b04934n%40googlegroups.com.