Measuring Adiabatic Surface Temperature

[Thevakumar Thevega]

Hi All,

I try to get the Adiabatic Surface Temperature (AST) of a column. When I model and run in FDS and Pyrosim software, I observed different results (Maximum AST) for the same model. Why is that?

I have attached the results from both software. 

Can anyone explain it to me?

Kind regards,

Thevega.

[Randy McDermott]

I would start by setting the colorbar limits to be the same.  In Smokeview, do right-click >> dialogs >> files/data/coloring.  Expand the boundary files tab and set the min/max to be the same as in Pyrosim.

--
You received this message because you are subscribed to the Google Groups "FDS and Smokeview Discussions" group.
To unsubscribe from this group and stop receiving emails from it, send an email to fds-smv+u...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/fds-smv/208056af-e9d2-4724-984a-b86ba5cf50aen%40googlegroups.com.

[Thevakumar Thevega]

Thank you for your response. 

But how can I confirm that the temperature range from Pyrosim is correct?

To view this discussion on the web visit https://groups.google.com/d/msgid/fds-smv/CAC6wax1MWeKYomHw2N%3Drb%2BwR_fmkUL3yVMGLZqdS3sDw%3DvB3iA%40mail.gmail.com.

[fde]

you can visually compare or click on the scalebar to highlight certain range of value. 

[Thevakumar Thevega]

Thank you for your response.

To view this discussion on the web visit https://groups.google.com/d/msgid/fds-smv/8fba0368-4d13-4068-97d5-9cb262435a7cn%40googlegroups.com.