RADIOMETER

[Kleinohr]

Hello everybody

i want to create some Radiometers. i put following linie into the fds-
file.

&DEVC ID='RADI4', QUANTITY='RADIOMETER', XYZ=1.20,0.60,0.40, IOR=-3/

and i get this mistake back

ERROR: Reposition DEVC No. 4 FDS cannot determine which boundary cell
to assign. But the Radiometer is exactly on an corner from one cell

[Kevin]

Your obstructions might have shifted to conform to the grid. Make sure
that if your device moves upwards from the point (1.2,0.6,0.4) it will
hit a solid.

[Kleinohr]

the obstrution under the DEVC is by 1.2,0.6,0.3. or must the DEVC lie
exactly on the obstruction. i want to messure the radiation from other
surfaces to this obstruction

[dr_jfloyd]

IOR = -3 is a downward pointing device. So if DEVC = x,y,0.4 and OBST
is x,y,0.3 FDS will not find the OBST as it looks above the DEVC.

> > > to assign. But the Radiometer is exactly on an corner from one cell- Hide quoted text -
>
> - Show quoted text -

[Kleinohr]

so and what should i do that i can messure the radiation.

[Kevin]

Section 12.2.1 of the User's Guide

> > > - Show quoted text -- Hide quoted text -