Windows Xp Sp3 Iso 64 Bit Bootable Usb
Clotilde Wilks
This topic covers how to manually create a Windows installation flash drive from Windows installation ISO disc image file or DVD, and is intended for manufacturers looking into creating media that they can use to manufacture Windows devices.
The steps described on this page assume you have Windows installation media and access to a Windows technician PC. If you're looking for an easy, automated way to create a bootable Windows installation flash drive, see:
Use this option and download Media Creation Tool if you want to create bootable USB media to perform a clean install on new or existing hardware. To get started you first need a license to install Windows 11 or have a Windows 10 device that qualifies for an upgrade to Windows 11.
To get started, you will first need to have a license to install Windows 11. You can then download and run the media creation tool. For more information on how to use the tool, see the instructions below.
So I made this linux live usb and I'm having trooble returning it to being a regular storage drive.I'm using windows 7, by using compmgmt.msc I can see the drive but I can't format it.usually when right clicking you can format but here I can only click on "help", chich does not help by the way.
After having tooled around with a USB Linux version using your image overwritten or multi partitioned flash pen drive, you might find it necessary to revert it back to a single fat partition (restore the flash pen drive to it's original state) that can again be read by all computers.
You can use the utilities that come with Windows to do this without downloading anything else. DISKPART from the command line as Administrative user will do what you need.
Once inside of the diskpart utility type in list disk, select the USB disk by typing select disk (x) and then clean, this should now wipe the USB stick, you can now create a new partition and format the UBS stick. To create a new partition table on the USB type in create partition primary, then select partition 1, then format fs=fat32 quick. Your USB stick should now be ready to use.
In Windows: Go to Disk Management. Find your disk. It should be a blue and black partition (just like your image). On the BLUE partition, right-click and delete partition. After that, the deleted partition will merge with the black partition and it will be UNPARTITIONED. You should be able to format the unpartitioned space to whatever system you like.
Get RMPrepUSB Here: RMPrepUSB download latest version (fosshub.com)
Get the Dos6.22 IMG file from here as you already did.
With RMPrepUSB (I'm using v.2.1.739) select File->Drive.
Go through the prompts and let it put all the files from the ISO onto the USB stick.
Copy ALL the files on the USB stick to somewhere on your hard drive (these should be the only files in the folder).
"In the Copy OS files from here" section, put the folder that you just copied all the files from the USB stick to.
In Sec.3 select MS-DOS bootable.
In Sec.4 select FAT16 on the left, and "Boot as HDD" and "Use 64hd"**
(Make sure the checkbox next to "5 Copy OS files" is checked)
Select 6 Prepare Drive and follow the prompts. It will partition, format, MBR, bootsector and copy the files to the USB stick.
When 9. is complete, hit Eject Drive and remove USB stick.
That's it! Let me know if it works for you.
Note: I think the problem with just doing the File->Drive thing is that it doesn't put the files in the right place on the USB stick. When you let it prep and copy the files itself, it puts everything in the proper place and order.
** You may have to monkey with the checkboxes in this section. My laptop places the USB Boot under its "Hard Drive" section when it lists it in its BIOS. Your computer may consider it removable storage, or a FDD.
Your computer is set to start up from the system partition on Drive 0. In order to boot to Drive 1 you need to establish a system partition on Drive 1, and then set the system to boot from that drive. To make a system partition on Drive 1, you would need to move/resize the Windows Partition to make room for the (new) system partition.
On your first disk you have the 500 MB EFI partition which you need to boot Windows 10. That is a Windows requirement. So when you remove that disk, with that partition, you cannot boot Windows. You need to recreat that on Disk 2. Perhaps the easiest way is to clone disk 1 to disk 2.
Recognise that any advice that I will try to give on what you want to do is likely to have errors and may cause you to need a reinstall anyhow. I have never tried what you are attempting and I have not taken time to research all the questions that have come to me in writing this. And I confess that I normally use Linux which has its own ways of dealing with Windows. If you have any valuable data on the PC, I would advice you to back it up.
You will have read that UEFI is now the accepted standard for booting PCs and laptops and that is what you have used to get to where you are. I think that a Windows install also adds (emergency?) boot information to that end partition but I think we can ignore that. Effectively you need to shrink the second drive by at least 550 MB and that can be done from within Windows. Hopefully you can shrink it from the front because that is where you need it. You can use gparted to do this which is a live Linux programme that will boot on the PC totally independent of Windows and will run from a USB stick. See .
If it were me I would use gparted to format that 550 MB to FAT32 and set the boot and ESP flags. Now remove the first drive or you could try moving any files from the first hard drive partition to the new 550 MB partition. With just the one hard drive in try booting Windows again or try a Windows repair.
To recap, my problem was that I had an SSD 250GB disk with a single NTFS Windows partition taking up the entire disk. So it needed a 2nd SSD drive containing an old boot partition in order to be usable. If either drive were to fail, my system would not be bootable.
I'm currently using a MacBook Pro with the latest M3 chip and I need some help for creating a bootable Windows 10 USB on my Mac. I've done some research but haven't found clear instructions that are specific to the M3 Macs. The process seems to be a bit different compared to older Mac models, and I'm looking for the best way to accomplish this task without running into compatibility issues.
To create a Windows 10 bootable USB on a M3 Mac, please try out WinBootMate app. It is a dedicated app for creating Windows bootable USB. Most importantly, it supports Apple Silicon Mac as you can see from this guide:
Thanks for your input. Actually, I am not going to run Windows 10 on my M3 MacBook Pro. My dad's PC was crashed and he asked me to install Windows 10 on its computer. My question is how to create a Windows 10 bootable USB on my Mac. I did this with Bootcamp app a couple of years ago but unable to find the app anymore.
Creating a Windows 10 bootable USB on a Mac using the Boot Camp Assistant app is a straightforward process. Boot Camp Assistant is a utility provided by Apple that allows you to create Windows bootable USB on Mac and install Microsoft Windows on your Mac.
I'm trying to make a bootable USB from a Windows 10 iso. I have tried to use woeusb to do that, like the internet tutorials say, but even with the apt updated woeusb can't be located, nor does the version on the snap store works. So then I've mounted the iso and copied it's files into the USB.
That also didn't work, even manually selecting "boot from USB" the computer would just go straight to the linux install. I think that means that didn't work, even though I have used this same usb stick earlier today to install linux. What can be done?
I am having an issue with a specific laptop that is giving me an inaccessible boot drive BSOD after I re-imaged the device. I can confirm the image is good. Boot is set to UEFI with SecureBoot on. It was legacy before the re-image, unsure as to why. I have try doing the image via Legacy boot as well but I get the same issue.
After install the new M.2 drive from Dell I am still getting Inaccessible Boot Drive after trying to install our image. I have been working on this for almost three days and I am out of ideas besides just claiming warranty on the laptop and being done with it.
d3342ee215