MIL-STD-2361
1 view
Skip to first unread message
世界资料网
Dec 28, 2012, 1:08:05 PM12/28/12
to falv...@googlegroups.com
商品资料说明：
MIL-STD-2361, DEPARTMENT OF DEFENSE INTERFACE STANDARD: DIGITAL PUBLICATIONS DEVELOPMENT (30 JAN 1997)., This standard establishes the Army Standard Generalized Markup Language (SGML) requirements for digital development, acquisition, and delivery of Army administrative, training and doctrine, and technicalequipment publications. The requirements for technical equipment publications include the development,acquisition, and delivery requirements for Electronic and Interactive Electronic Technical Manuals (ETM/IETM) when used in conjunction with MIL-M-87268 and MIL-D-87269. Designated appendicies of thisstandard contain references to, and access instructions for, the modular SGML Document Type Definitions(DTD) and Tag Description Lists for the development of Army publications in conjunction with the respectivefunctional requirements documents. Data prepared in conformance to these requirements will facilitate theautomate! d storage, retrieval, interchange, and processing of publications from heterogeneous data sources.
MIL-STD-2361
MIL-STD-2361, DEPARTMENT OF DEFENSE INTERFACE STANDARD: DIGITAL PUBLICATIONS DEVELOPMENT (30 JAN 1997)., This standard establishes the Army Standard Generalized Markup Language (SGML) requirements for digital development, acquisition, and delivery of Army administrative, training and doctrine, and technicalequipment publications. The requirements for technical equipment publications include the development,acquisition, and delivery requirements for Electronic and Interactive Electronic Technical Manuals (ETM/IETM) when used in conjunction with MIL-M-87268 and MIL-D-87269. Designated appendicies of thisstandard contain references to, and access instructions for, the modular SGML Document Type Definitions(DTD) and Tag Description Lists for the development of Army publications in conjunction ! with the respectivefunctional requirements documents. Data pre! pared in conformance to these requirements will facilitate theautomated storage, retrieval, interchange, and processing of publications from heterogeneous data sources.
MIL-STD-2401
MIL-STD-2401, MILITARY STANDARD: DEPARTMENT OF DEFENSE WORLD GEODETIC SYSTEM (WGS) (11 JAN 1994)., This standard specifies the requirements for use of WorldGeodetic System 1984 (WGS 84), the defining and derived parameters for WGS 84, and methods for transforming between WGS 84 and other geodetic systems. This standard applies to all DoD systems andproducts which require use of a World Geodetic System. A world geodeticsystem is a consistent global coordinate system which allows an unambiguousrepresentation of positional information. Navigation solutions from theNAVSTAR Global Positioning System (GPS) and the Navy Navigation SatelliteSystem (NNSS) are referred to this system. A WGS 84 ellipsoid provides areference surface upon which coo! rdinates are calculated and is particularlyapplicable to inertial systems. A WGS 84 Earth Gravitational Model (EGM)provides necessary force models for accurate global operation of strategicweapons, navigation, and satellite systems. Many MC&G products produced byother agencies and governments (and DMA products not yet placed on WGS 84) arenot referred to the WGS 84. Parameters to transform these products to WGS 84are part of this standard.
MIL-STD-2401 (NOTICE 1)
MIL-STD-2401 (NOTICE 1), DEPARTMENT OF DEFENSE STANDARD PRACTICE: DEPARTMENT OF DEFENSE WORLD GEODETIC SYSTEM (WGS) (31 MAR 2004)., The purpose of this notice is to inform users of the change in name of the preparing activity fromthe Defense and Mapping Agency (DMA) to the National Geospatial-Intelligence Agency(NGA).
MIL-STD-2402
MIL-STD-2402, STANDARD PRACTICE FOR MAPPING! , CHARTING, AND GEODESY SYMBOLS FOR GRAPHIC PRODUCTS (21 APR 1! 995)., T his standard defines Mapping, Charting, and Geodesy (MC&G) symbology for the Defense Mapping Agency (DMA) graphic (hardcopy) products. This is one of two military standards that document symbology for DMA products. Symbology associated with DMA Vector Products (those in Vector Product Format), are found in Mil-STD-2412, Vector Product Format Symbology.
MIL-STD-2402 (NOTICE 1)
MIL-STD-2402 (NOTICE 1), DEPARTMENT OF DEFENSE STANDARD PRACTICE: MAPPING, CHARTING, AND GEODESY SYMBOLSFOR GRAPHIC PRODUCTS (31 MAR 2004)., The purpose of this notice is to inform users of the change in name of the preparing activity fromthe Defense and Mapping Agency (DMA) to the National Geospatial-Intelligence Agency(NGA).Change the Point
MIL-STD-2407
MIL-STD-2407, DEPARTMENT OF DEFENSE INTERFACE STANDARD: VECTOR PRODUCT FORMAT (28 JUN 1996) [SUPERSEDING MIL! -STD-600006]., The vector product format (VPF) is a standard format, structure, and organization for large geographic databases that are based on a georelational data model and are intended for direct use. VPF is designed to be compatible with a widevariety of applications and products. VPF allows application software to read data directly from computer-readable media without prior conversion to an intermediate form. VPF uses tables and indexes that permit direct access by spatial location and thematic content and is designed to be used with any digital geographic data in vector format that can be represented using nodes, edges, and faces. VPF defines the format of data objects, and the georelational data model provides a data organization within which software can manipulate the VPF data objects. A product specification corresponding to a specific database product determines the precise contents of feature tables and their relationships in the database. In this context, ea! ch separate product or application is defined by a product spe! cificati on and implemented by using VPF structures.
MIL-STD-2407 (NOTICE 1)
MIL-STD-2407 (NOTICE 1), DEPARTMENT OF DEFENSE INTERFACE STANDARD: VECTOR PRODUCT FORMAT (26 OCT 1999) [SUPERSEDING MIL-STD-600006]., TO ALL HOLDERS OF MIL-STD-2407: THE FOLLOWING PAGES OF MIL-STD-2407 HAVE BEEN REVISED AND SUPERSEDE THEPAGES LISTED:
MIL-STD-2407 (NOTICE 2)
MIL-STD-2407 (NOTICE 2), DEPARTMENT OF DEFENSE INTERFACE STANDARD: VECTOR PRODUCT FORMAT (31 MAR 2004) [SUPERSEDING MIL-STD-600006]., The purpose of this notice is to inform users of the change in name of the preparing activity fromthe Defense and Mapping Agency (DMA) to the National Geospatial-Intelligence Agency(NGA).
MIL-STD-2408
MIL-STD-2408, DEPARTMENT OF DEFENSE STANDARD PRACTICE: MAPPING, CHARTING & GEODESY GLOSSARY OF F! EATURE AND ATTRIBUTE DEFINITIONS (21 APR 1995)., This Military Standard, MIL-STD-2408, is a specialized dictionary wherein physical and conceptual earth objects/entities and their descriptive characteristics/properties are defined as Mapping, Charting, and Geodesy (MC&G) features and their associated attributes.
MIL-STD-2408 (NOTICE 1)
MIL-STD-2408 (NOTICE 1), DEPARTMENT OF DEFENSE STANDARD PRACTICE: MAPPING, CHARTING & GEODESY GLOSSARY OF FEATURE AND ATTRIBUTE DEFINITIONS (24 MAY 1995)., TO ALL HOLDERS OF MIL-STD-2408: MAKE THE FOLLOWING CHANGE TO THE DIR ATTRIBUTE DEFINITION:
MIL-STD-2408 (NOTICE 2)
MIL-STD-2408 (NOTICE 2), DEPARTMENT OF DEFENSE STANDARD PRACTICE: MAPPING, CHARTING & GEODESY GLOSSARY OF FEATURE AND ATTRIBUTE DEFINITIONS (15 AUG 1995)., TO ALL HOLDERS OF MIL-STD-2408: MAKE THE FOLLOWING CHANGES TO THE INDIC! ATED ATTRIBUTE VALUES:
MIL-STD-2408 (NOTICE 3)
MIL-STD-2408 (NOTICE 3), DEPARTMENT OF DEFENSE STANDARD PRACTICE: MAPPING, CHARTING & GEODESY GLOSSARY OF FEATURE AND ATTRIBUTE DEFINITIONS (31 MAR 2004)., The purpose of this notice is to inform users of the change in name of the preparing activity fromthe Defense and Mapping Agency (DMA) to the National Geospatial-Intelligence Agency(NGA).
MIL-STD-2410
MIL-STD-2410, MILITARY STANDARD: MAPPING, CHARTING, AND GEODESY REPRODUCTION AND PRINTING (31 JAN 1995) [SUPERSEDES MIL-STD-600005]., This standard defines MC&G reproduction and printing and requirements for lithographic products produced by the Defense Mapping Agency (DMA). Included are detailed specifications for dot screens, area patterns (APs), line patterns (LPs), posicuts, and type styles.
MIL-STD-2410 (NOTICE 1)
MIL-STD-2410 ! (NOTICE 1), DEPARTMENT OF DEFENSESTANDARD PRACTICE: MAPPING, CHARTING, AND GEODESY REPRODUCTION AND PRINTING (31 MAR 2004) [SUPERSEDES MIL-STD-600005]., The purpose of this notice is to inform users of the change in name of the preparing activity fromthe Defense and Mapping Agency (DMA) to the National Geospatial-Intelligence Agency(NGA).
MIL-STD-2411/1
MIL-STD-2411/1, DEPARTMENT OF DEFENSE INTERFACE STANDARD: REGISTERED DATA VALUES FOR RASTER PRODUCT FORMAT (30 AUG 1994)., This document is a companion document to the military standard for Raster Product Format (RPF), MIL-STD-2411. It contains all registered data values referenced in the standard.
MIL-STD-2411/2
MIL-STD-2411/2, DEPARTMENT OF DEFENSE INTERFACE STANDARD: INTEGRATION OF RASTER PRODUCT FORMAT FILES INTO THE NATIONAL IMAGERY TRANSMISSION FORMAT (26 AUG 1994)., The Raster Pr! oduct Format (RPF) is a standard data structure for geospatial! databas es composed of rectangular arrays of pixel values (e.g. in digitized maps or images) in compressed or uncompressed form.
MIL-STD-2411/1 (W/CHANGE 3)
MIL-STD-2411/1 (W/CHANGE 3), DEPARTMENT OF DEFENSE INTERFACE STANDARD REGISTERED DATA VALUES FOR RASTER PRODUCT FORMAT (01 DEC 2009)., This document is a companion document to the military standard for Raster Product Format (RPF), MIL-STD-2411. It contains all registered data values referenced in the standard. This document is intended to supply producers and users of RPF products with the registered data values necessary to produce and interpret RPF data.
MIL-STD-2411/1 (NOTICE 1)
MIL-STD-2411/1 (NOTICE 1), DEPARTMENT OF DEFENSE INTERFACE STANDARD REGISTERED DATA VALUES FOR RASTER PRODUCT FORMAT (16 AUG 2001)., TO ALL HOLDERS OF MIL-STD-2411-1: THE FOLLOWING PAGES OF MIL-STD-2411-1 HAVE BEE! N REVISEDAND SUPERSEDE THE PAGES LISTED.
MIL-STD-2411/1 (NOTICE 2)
MIL-STD-2411/1 (NOTICE 2), DEPARTMENT OF DEFENSE INTERFACE STANDARD REGISTERED DATA VALUES FOR RASTER PRODUCT FORMAT (31 MAR 2004)., The purpose of this notice is to inform users of the change in name of the preparing activity fromthe Defense and Mapping Agency (DMA) to the National Geospatial-Intelligence Agency(NGA).
MIL-STD-2411/2 (NOTICE 1)
MIL-STD-2411/2 (NOTICE 1), DEPARTMENT OF DEFENSE INTERFACE STANDARD: INTEGRATION OF RASTER PRODUCT FORMAT FILES INTO THE NATIONAL IMAGERY TRANSMISSION FORMAT (31 MAR 2004)., The purpose of this notice is to inform users of the change in name of the preparing activity fromthe Defense and Mapping Agency (DMA) to the National Geospatial-Intelligence Agency(NGA).
http://www.infoeach.com/item-10433.html
恭颂商祺! 万事� ��意
---------------------------------------------------------------------
世界资料网提供各种行业资料， 国军标、 美军标、 美国汽车工程师协会 SAE、 美国材料测试协会 ASTM、 情报专利 期刊 、 会议论文、 统计数据、 海关资料数据 年鉴、 行业数据、 协会数据、 政府报告、 商务部报告等。
网址:http://www.infoeach.com
Email: ke...@infoeach.com
MIL-STD-2361, DEPARTMENT OF DEFENSE INTERFACE STANDARD: DIGITAL PUBLICATIONS DEVELOPMENT (30 JAN 1997)., This standard establishes the Army Standard Generalized Markup Language (SGML) requirements for digital development, acquisition, and delivery of Army administrative, training and doctrine, and technicalequipment publications. The requirements for technical equipment publications include the development,acquisition, and delivery requirements for Electronic and Interactive Electronic Technical Manuals (ETM/IETM) when used in conjunction with MIL-M-87268 and MIL-D-87269. Designated appendicies of thisstandard contain references to, and access instructions for, the modular SGML Document Type Definitions(DTD) and Tag Description Lists for the development of Army publications in conjunction with the respectivefunctional requirements documents. Data prepared in conformance to these requirements will facilitate theautomate! d storage, retrieval, interchange, and processing of publications from heterogeneous data sources.
MIL-STD-2361
MIL-STD-2361, DEPARTMENT OF DEFENSE INTERFACE STANDARD: DIGITAL PUBLICATIONS DEVELOPMENT (30 JAN 1997)., This standard establishes the Army Standard Generalized Markup Language (SGML) requirements for digital development, acquisition, and delivery of Army administrative, training and doctrine, and technicalequipment publications. The requirements for technical equipment publications include the development,acquisition, and delivery requirements for Electronic and Interactive Electronic Technical Manuals (ETM/IETM) when used in conjunction with MIL-M-87268 and MIL-D-87269. Designated appendicies of thisstandard contain references to, and access instructions for, the modular SGML Document Type Definitions(DTD) and Tag Description Lists for the development of Army publications in conjunction ! with the respectivefunctional requirements documents. Data pre! pared in conformance to these requirements will facilitate theautomated storage, retrieval, interchange, and processing of publications from heterogeneous data sources.
MIL-STD-2401
MIL-STD-2401, MILITARY STANDARD: DEPARTMENT OF DEFENSE WORLD GEODETIC SYSTEM (WGS) (11 JAN 1994)., This standard specifies the requirements for use of WorldGeodetic System 1984 (WGS 84), the defining and derived parameters for WGS 84, and methods for transforming between WGS 84 and other geodetic systems. This standard applies to all DoD systems andproducts which require use of a World Geodetic System. A world geodeticsystem is a consistent global coordinate system which allows an unambiguousrepresentation of positional information. Navigation solutions from theNAVSTAR Global Positioning System (GPS) and the Navy Navigation SatelliteSystem (NNSS) are referred to this system. A WGS 84 ellipsoid provides areference surface upon which coo! rdinates are calculated and is particularlyapplicable to inertial systems. A WGS 84 Earth Gravitational Model (EGM)provides necessary force models for accurate global operation of strategicweapons, navigation, and satellite systems. Many MC&G products produced byother agencies and governments (and DMA products not yet placed on WGS 84) arenot referred to the WGS 84. Parameters to transform these products to WGS 84are part of this standard.
MIL-STD-2401 (NOTICE 1)
MIL-STD-2401 (NOTICE 1), DEPARTMENT OF DEFENSE STANDARD PRACTICE: DEPARTMENT OF DEFENSE WORLD GEODETIC SYSTEM (WGS) (31 MAR 2004)., The purpose of this notice is to inform users of the change in name of the preparing activity fromthe Defense and Mapping Agency (DMA) to the National Geospatial-Intelligence Agency(NGA).
MIL-STD-2402
MIL-STD-2402, STANDARD PRACTICE FOR MAPPING! , CHARTING, AND GEODESY SYMBOLS FOR GRAPHIC PRODUCTS (21 APR 1! 995)., T his standard defines Mapping, Charting, and Geodesy (MC&G) symbology for the Defense Mapping Agency (DMA) graphic (hardcopy) products. This is one of two military standards that document symbology for DMA products. Symbology associated with DMA Vector Products (those in Vector Product Format), are found in Mil-STD-2412, Vector Product Format Symbology.
MIL-STD-2402 (NOTICE 1)
MIL-STD-2402 (NOTICE 1), DEPARTMENT OF DEFENSE STANDARD PRACTICE: MAPPING, CHARTING, AND GEODESY SYMBOLSFOR GRAPHIC PRODUCTS (31 MAR 2004)., The purpose of this notice is to inform users of the change in name of the preparing activity fromthe Defense and Mapping Agency (DMA) to the National Geospatial-Intelligence Agency(NGA).Change the Point
MIL-STD-2407
MIL-STD-2407, DEPARTMENT OF DEFENSE INTERFACE STANDARD: VECTOR PRODUCT FORMAT (28 JUN 1996) [SUPERSEDING MIL! -STD-600006]., The vector product format (VPF) is a standard format, structure, and organization for large geographic databases that are based on a georelational data model and are intended for direct use. VPF is designed to be compatible with a widevariety of applications and products. VPF allows application software to read data directly from computer-readable media without prior conversion to an intermediate form. VPF uses tables and indexes that permit direct access by spatial location and thematic content and is designed to be used with any digital geographic data in vector format that can be represented using nodes, edges, and faces. VPF defines the format of data objects, and the georelational data model provides a data organization within which software can manipulate the VPF data objects. A product specification corresponding to a specific database product determines the precise contents of feature tables and their relationships in the database. In this context, ea! ch separate product or application is defined by a product spe! cificati on and implemented by using VPF structures.
MIL-STD-2407 (NOTICE 1)
MIL-STD-2407 (NOTICE 1), DEPARTMENT OF DEFENSE INTERFACE STANDARD: VECTOR PRODUCT FORMAT (26 OCT 1999) [SUPERSEDING MIL-STD-600006]., TO ALL HOLDERS OF MIL-STD-2407: THE FOLLOWING PAGES OF MIL-STD-2407 HAVE BEEN REVISED AND SUPERSEDE THEPAGES LISTED:
MIL-STD-2407 (NOTICE 2)
MIL-STD-2407 (NOTICE 2), DEPARTMENT OF DEFENSE INTERFACE STANDARD: VECTOR PRODUCT FORMAT (31 MAR 2004) [SUPERSEDING MIL-STD-600006]., The purpose of this notice is to inform users of the change in name of the preparing activity fromthe Defense and Mapping Agency (DMA) to the National Geospatial-Intelligence Agency(NGA).
MIL-STD-2408
MIL-STD-2408, DEPARTMENT OF DEFENSE STANDARD PRACTICE: MAPPING, CHARTING & GEODESY GLOSSARY OF F! EATURE AND ATTRIBUTE DEFINITIONS (21 APR 1995)., This Military Standard, MIL-STD-2408, is a specialized dictionary wherein physical and conceptual earth objects/entities and their descriptive characteristics/properties are defined as Mapping, Charting, and Geodesy (MC&G) features and their associated attributes.
MIL-STD-2408 (NOTICE 1)
MIL-STD-2408 (NOTICE 1), DEPARTMENT OF DEFENSE STANDARD PRACTICE: MAPPING, CHARTING & GEODESY GLOSSARY OF FEATURE AND ATTRIBUTE DEFINITIONS (24 MAY 1995)., TO ALL HOLDERS OF MIL-STD-2408: MAKE THE FOLLOWING CHANGE TO THE DIR ATTRIBUTE DEFINITION:
MIL-STD-2408 (NOTICE 2)
MIL-STD-2408 (NOTICE 2), DEPARTMENT OF DEFENSE STANDARD PRACTICE: MAPPING, CHARTING & GEODESY GLOSSARY OF FEATURE AND ATTRIBUTE DEFINITIONS (15 AUG 1995)., TO ALL HOLDERS OF MIL-STD-2408: MAKE THE FOLLOWING CHANGES TO THE INDIC! ATED ATTRIBUTE VALUES:
MIL-STD-2408 (NOTICE 3)
MIL-STD-2408 (NOTICE 3), DEPARTMENT OF DEFENSE STANDARD PRACTICE: MAPPING, CHARTING & GEODESY GLOSSARY OF FEATURE AND ATTRIBUTE DEFINITIONS (31 MAR 2004)., The purpose of this notice is to inform users of the change in name of the preparing activity fromthe Defense and Mapping Agency (DMA) to the National Geospatial-Intelligence Agency(NGA).
MIL-STD-2410
MIL-STD-2410, MILITARY STANDARD: MAPPING, CHARTING, AND GEODESY REPRODUCTION AND PRINTING (31 JAN 1995) [SUPERSEDES MIL-STD-600005]., This standard defines MC&G reproduction and printing and requirements for lithographic products produced by the Defense Mapping Agency (DMA). Included are detailed specifications for dot screens, area patterns (APs), line patterns (LPs), posicuts, and type styles.
MIL-STD-2410 (NOTICE 1)
MIL-STD-2410 ! (NOTICE 1), DEPARTMENT OF DEFENSESTANDARD PRACTICE: MAPPING, CHARTING, AND GEODESY REPRODUCTION AND PRINTING (31 MAR 2004) [SUPERSEDES MIL-STD-600005]., The purpose of this notice is to inform users of the change in name of the preparing activity fromthe Defense and Mapping Agency (DMA) to the National Geospatial-Intelligence Agency(NGA).
MIL-STD-2411/1
MIL-STD-2411/1, DEPARTMENT OF DEFENSE INTERFACE STANDARD: REGISTERED DATA VALUES FOR RASTER PRODUCT FORMAT (30 AUG 1994)., This document is a companion document to the military standard for Raster Product Format (RPF), MIL-STD-2411. It contains all registered data values referenced in the standard.
MIL-STD-2411/2
MIL-STD-2411/2, DEPARTMENT OF DEFENSE INTERFACE STANDARD: INTEGRATION OF RASTER PRODUCT FORMAT FILES INTO THE NATIONAL IMAGERY TRANSMISSION FORMAT (26 AUG 1994)., The Raster Pr! oduct Format (RPF) is a standard data structure for geospatial! databas es composed of rectangular arrays of pixel values (e.g. in digitized maps or images) in compressed or uncompressed form.
MIL-STD-2411/1 (W/CHANGE 3)
MIL-STD-2411/1 (W/CHANGE 3), DEPARTMENT OF DEFENSE INTERFACE STANDARD REGISTERED DATA VALUES FOR RASTER PRODUCT FORMAT (01 DEC 2009)., This document is a companion document to the military standard for Raster Product Format (RPF), MIL-STD-2411. It contains all registered data values referenced in the standard. This document is intended to supply producers and users of RPF products with the registered data values necessary to produce and interpret RPF data.
MIL-STD-2411/1 (NOTICE 1)
MIL-STD-2411/1 (NOTICE 1), DEPARTMENT OF DEFENSE INTERFACE STANDARD REGISTERED DATA VALUES FOR RASTER PRODUCT FORMAT (16 AUG 2001)., TO ALL HOLDERS OF MIL-STD-2411-1: THE FOLLOWING PAGES OF MIL-STD-2411-1 HAVE BEE! N REVISEDAND SUPERSEDE THE PAGES LISTED.
MIL-STD-2411/1 (NOTICE 2)
MIL-STD-2411/1 (NOTICE 2), DEPARTMENT OF DEFENSE INTERFACE STANDARD REGISTERED DATA VALUES FOR RASTER PRODUCT FORMAT (31 MAR 2004)., The purpose of this notice is to inform users of the change in name of the preparing activity fromthe Defense and Mapping Agency (DMA) to the National Geospatial-Intelligence Agency(NGA).
MIL-STD-2411/2 (NOTICE 1)
MIL-STD-2411/2 (NOTICE 1), DEPARTMENT OF DEFENSE INTERFACE STANDARD: INTEGRATION OF RASTER PRODUCT FORMAT FILES INTO THE NATIONAL IMAGERY TRANSMISSION FORMAT (31 MAR 2004)., The purpose of this notice is to inform users of the change in name of the preparing activity fromthe Defense and Mapping Agency (DMA) to the National Geospatial-Intelligence Agency(NGA).
http://www.infoeach.com/item-10433.html
恭颂商祺! 万事� ��意
---------------------------------------------------------------------
世界资料网提供各种行业资料， 国军标、 美军标、 美国汽车工程师协会 SAE、 美国材料测试协会 ASTM、 情报专利 期刊 、 会议论文、 统计数据、 海关资料数据 年鉴、 行业数据、 协会数据、 政府报告、 商务部报告等。
网址:http://www.infoeach.com
Email: ke...@infoeach.com
Reply all
Reply to author
Forward
0 new messages