Faema Compact User Group

Duncan thank you for this info. I do not see the adjustment screws but a photo would maybe of some

Hi Riley, I also had trouble steaming smaller pitchers of milk with the stock tip. I switched to this

Looks great 👍🏻 On Tue, Dec 26, 2023, 9:34 AM Flo Baine <riffe...@gmail.com> wrote: HEy Sam.

I am happy to help 👍 On Wed, Jan 10, 2024, 6:19 AM Duncan Slarke <duncan...@gmail.com> wrote

Correct, screw comes into play when external water pressure exceeds units ability to regulate

Hi Flo, Good advice so far. It looks like your machine needs a full strip and descale, but it can be

Hello! Really glad I found this group, thanks for any help in advance. I just got this FAEMA and

It seems some of the side and back panel parts for my Faema C85 restoration either were lost or

For what it's worth, Faema has been ignoring my support request for parts info, but I think,

I have a single group Compact A. Everything seems to work fine except the pump will not trigger on

Nice find 👍 On Fri, Dec 30, 2022, 9:15 AM Scott Jones <scottj...@gmail.com> wrote: Looks

For the fill button, disassemble and clean. This is the same place I started when I first got my

Here's the setup. Everything is up and running. Starting to get shots dialed in. And most

Alright!! The tank now fills when you press the auto fill button!! I disassembled the water intake

NICE! Thank you for the info Sam! On Sunday, July 19, 2020 at 12:37:53 PM UTC-4, Sam Pratt New

In plumbed-in cases the pump will be primed from a few bars of main pressure. You can also manually

bit late sorry, I ordered the softener part from Europe, did not find american suppliers, still

Very nice! On Tue, May 26, 2020, 11:10 AM Joe Kotska <joek...@gmail.com> wrote: I had it for

Thank you! On Mon, May 25, 2020, 9:08 PM Alex <alexb...@gmail.com> wrote: Nice job, thanks

Hi Juan, espressoparts.com and cafeparts.com both have exploded parts diagrams and sell most of the

Hi Sam, Did you ever find a replacement? It looks like they have them on both cafeparts.com and

Hi Ben, There are a couple of different ways to check the pressure. You can use something like this (

The circuit is fairly simple. When the grouphead valve fails electrical it is usually stuck in the

Hey All, I have a complete Faema C85 for sale. It was working when I completely disassembled it to

I just looked, bought mine from a restaurant March 2011, have used it continuously since then....

This is all I have On Fri, Nov 16, 2018, 8:08 AM Jocke Fernie <ferni...@gmail.com wrote: Hi, Do

*turns ON but doesn't pump...

Does anyone have a user manual they can share? There is a parts manual floating around on the net,

I tried, it cracked and became unusable. I now prefilter the water before it enters machine. On Fri,