arts problem (was sis 7012 and arts)
Mark Kirby
Cant get any sound at all through arts. The only way to get sound as far as
i've found is to pass an audio file directly through dev/sound or dev/audio.
dmesg output follows.
NetBSD 1.6ZE (GENERIC) #1: Fri Nov 7 17:27:30 GMT 2003
root@loki:/usr/obj/sys/arch/i386/compile/GENERIC
total memory = 383 MB
avail memory = 347 MB
using 4935 buffers containing 19740 KB of memory
BIOS32 rev. 0 found at 0xfdae0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon Model 4 (Thunderbird) (686-class), 896.23 MHz, id 0x642
cpu0: features c1c7f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features c1c7f9ff<PGE,MCA,CMOV,PAT,PSE36,PN,MMXX,MMX>
cpu0: features c1c7f9ff<FXSR,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 24 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System SiS 735 Host Bridge (rev. 0x01)
agp0 at pchb0: aperture at 0xd0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Silicon Integrated System 86C201 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies 3D Rage Pro (AGP) (rev. 0x5c)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 2 function 0
pcib0: Silicon Integrated System 85C503 or 5597/5598 ISA bridge (rev. 0x00)
ohci0 at pci0 dev 2 function 2: Silicon Integrated System 5597/5598 USB host
controller (rev. 0x07)
ohci0: interrupting at irq 11
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 3: Silicon Integrated System 5597/5598 USB host
controller (rev. 0x07)
ohci1: interrupting at irq 11
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
siside0 at pci0 dev 2 function 5
siside0: Silicon Integrated System 735 IDE controller (rev. 0xd0)
siside0: bus-master DMA support present
siside0: primary channel wired to compatibility mode
siside0: primary channel interrupting at irq 14
atabus0 at siside0 channel 0
siside0: secondary channel wired to compatibility mode
siside0: secondary channel interrupting at irq 15
atabus1 at siside0 channel 1
auich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio
auich0: interrupting at irq 11
auich0: ac97: Realtek RL5383/RL5522/ALC100 codec; Realtek 3D
auich0: ac97: ext id 200<AMAP>
tlp0 at pci0 dev 17 function 0: Macronix MX98715AEC-x Ethernet, pass 2.5
tlp0: broken MicroWire interface detected; setting SROM size to 1Kb
tlp0: interrupting at irq 11
tlp0: Ethernet address 00:20:18:a8:45:4a
tlp0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
audio0 at auich0: full duplex, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <IBM-DTLA-307030>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 29314 MB, 59560 cyl, 16 head, 63 sec, 512 bytes/sect x 60036480 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA
data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HITACHI DVD-ROM GD-7500, , 0005> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(siside0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA
data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
kde shows my sound card as the same as in dmesg.
When i run artsd -l 0 on the command line i get
bash-2.05b$ artsd -l 0
artsd version is 1.1.4
gsl: using Unix98 pthreads directly for mutexes and conditions
autodetecting driver:
- toss: 4
- null: -1
- oss: 10
... which means we'll default to oss
device capabilities: revision0 duplex trigger
buffering: 7 fragments with 1024 bytes (audio latency is 40.6 ms)
AudioIOOSS: failed prefilling audio buffer (might cause synchronization
problems in conjunction with full duplex)
virtualize StereoVolumeControl
device capabilities: revision0 duplex trigger
buffering: 7 fragments with 1024 bytes (audio latency is 40.6 ms)
AudioIOOSS: failed prefilling audio buffer (might cause synchronization
problems in conjunction with full duplex)
audio format is 44100 Hz, 16 bits, 2 channels
addDirectory(/usr/pkg/lib/mcop,)
addDirectory(/usr/pkg/lib/mcop/Arts,Arts)
addDirectory(/usr/pkg/lib/mcop/Arts/Environment,Arts::Environment)
addDirectory(/usr/pkg/lib/mcop/Noatun,Noatun)
addDirectory(/home/mark/.mcop/trader-cache,)
unix_connect: can't connect to server
(unix:/tmp/mcop-mark/loki_coris_org_uk-062a-3fb23977)
Arts::MidiManager registered successfully.
There are already artsd objects registered, looking if they are active...
unix_connect: can't connect to server
(unix:/tmp/mcop-mark/loki_coris_org_uk-062a-3fb23977)
... cleaned 5 unused mcop global references.
unix_connect: can't connect to server
(unix:/tmp/mcop-mark/loki_coris_org_uk-062a-3fb23977)
(The previous message was repeated 4 times.)
AudioSubSystem::handleIO: write failed
len = 964, can_write = 1024, errno = 17 (File exists)
This might be a sound hardware/driver specific problem (see aRts FAQ)
I looked in /tmp/mcop-mark and the server exists.
I have no idea what to do now, so anybody got any ideas (farfetched or
otherwise).
Sorry about the length but i'm new to NetBSD and unix so i didnt know how much
info to include.
Thanks in advance.
Mark