Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Resume from swsusp stopped working with 2.6.14 and 2.6.15-rc1

12 views
Skip to first unread message

Bjørn Mork

unread,
Nov 12, 2005, 8:40:18 AM11/12/05
to linux-...@vger.kernel.org
I have had swsusp working for ages on a IBM Thinkpad T42, but since
2.6.14 it hasn't been willing to resume anymore. Both suspending to
disk and ACPI S3 still works.

Output of dmesg below (running 2.6.15-rc1). Notice the line:

Restarting tasks...<6> Strange, kseriod not stopped

I guess that's the explanation. Could it be the new TrackPoint
driver, maybe? (This PC has both a TrackPoint and a Touchpad).

BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff50000 (usable)
BIOS-e820: 000000003ff50000 - 000000003ff67000 (ACPI data)
BIOS-e820: 000000003ff67000 - 000000003ff79000 (ACPI NVS)
BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 261968
DMA zone: 4096 pages, LIFO batch:2
Normal zone: 225280 pages, LIFO batch:64
HighMem zone: 32592 pages, LIFO batch:16
DMI present.
ACPI: RSDP (v002 IBM ) @ 0x000f6df0
ACPI: XSDT (v001 IBM TP-1R 0x00003130 LTP 0x00000000) @ 0x3ff5a6
cd
ACPI: FADT (v003 IBM TP-1R 0x00003130 IBM 0x00000001) @ 0x3ff5a8
00
ACPI: SSDT (v001 IBM TP-1R 0x00003130 MSFT 0x0100000e) @ 0x3ff5a9
b4
ACPI: ECDT (v001 IBM TP-1R 0x00003130 IBM 0x00000001) @ 0x3ff66e
bc
ACPI: TCPA (v001 IBM TP-1R 0x00003130 PTL 0x00000001) @ 0x3ff66f
0e
ACPI: BOOT (v001 IBM TP-1R 0x00003130 LTP 0x00000001) @ 0x3ff66f
d8
ACPI: DSDT (v001 IBM TP-1R 0x00003130 MSFT 0x0100000e) @ 0x000000
00
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 50000000 (gap: 40000000:bf800000)
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Linux ro root=305 resume=/dev/hda
7 acpi_sleep=s3_bios
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1694.662 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1034704k/1047872k available (2219k kernel code, 12368k reserved
, 677k data, 168k init, 130368k highmem)
Checking if this processor honours the WP bit even in supervisor mode..
Ok.
Calibrating delay using timer specific routine.. 3392.13 BogoMIPS (lpj=
6784275)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000
00000180 00000000 00000000
CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 0
0000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040 0000018
0 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
CPU: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0800)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Found ECDT
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 28)
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post
a report
TC classifier action (bugs to net...@vger.kernel.org cc ha...@cyberus.ca
)
PCI: Bridge: 0000:00:01.0
IO window: 3000-3fff
MEM window: c0100000-c01fffff
PREFETCH window: e0000000-e7ffffff
PCI: Bus 3, cardbus bridge: 0000:02:00.0
IO window: 00004000-000040ff
IO window: 00004400-000044ff
PREFETCH window: e8000000-e9ffffff
MEM window: c2000000-c3ffffff
PCI: Bus 7, cardbus bridge: 0000:02:00.1
IO window: 00004800-000048ff
IO window: 00004c00-00004cff
PREFETCH window: ea000000-ebffffff
MEM window: c4000000-c5ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 4000-8fff
MEM window: c0200000-cfffffff
PREFETCH window: e8000000-efffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, lo
w) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, lo
w) -> IRQ 11
Simple Boot Flag at 0x35 set to 0x1
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, lo
w) -> IRQ 11
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=6) Memory=320.00 Mhz, Syste
m=210.00 MHz
radeonfb: PLL min 20000 max 35000
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: Samsung LTN150P1-L02
radeonfb: detected LVDS panel size from BIOS: 1400x1050
radeondb: BIOS provided dividers will be used
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 175x65
radeonfb (0000:01:00.0): ATI Radeon NP
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (48 C)
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: AGP aperture is 256M @ 0xd0000000
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Intel(R) PRO/1000 Network Driver - version 6.1.16-k2-NAPI
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, lo
w) -> IRQ 11
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebu
s=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, lo
w) -> IRQ 11
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HTS548040M9AT00, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-STDVD-ROM GDR8083N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/7877KiB Cache, CHS=65535/16/63, UD
MA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 >
mice: PS/2 mouse device common for all mice
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-d...@redhat.co
m
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard as /class/input/input0
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Using IPI Shortcut mode
Stopping tasks: ===<6>Synaptics Touchpad, model: 1, fw: 5.9, id:
0x2c6ab1, caps: 0x884793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input1

stopping tasks failed (1 tasks remaining)
Restarting tasks...<6> Strange, kseriod not stopped
done
ACPI wakeup devices:
LID SLPB PCI0 UART PCI1 USB0 USB1 AC9M
ACPI: (supports S0 S3 S4 S5)
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input2
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda5: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 928530
ext3_orphan_cleanup: deleting unreferenced inode 928508
EXT3-fs: hda5: 2 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 168k freed
Adding 2097136k swap on /dev/hda7. Priority:-1 extents:1 across:209713
6k
EXT3 FS on hda5, internal journal
hdc: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Non-volatile memory driver v1.2
ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
ibm_acpi: http://ibm-acpi.sf.net/
ibm_acpi: dock device not present
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, lo
w) -> IRQ 11
[drm] Initialized radeon 1.19.0 20050911 on minor 0:
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.15.1 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF54
13)
wlan: 0.8.4.2 (Atheros/multi-bss)
ath_rate_sample: 1.2
ath_pci: 0.9.4.5 (Atheros/multi-bss)
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, lo
w) -> IRQ 11
wifi%d: HAL ABI mismatch; driver expects 0x5091300, HAL reports 0x50711
00
ACPI: PCI interrupt for device 0000:02:02.0 disabled
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, lo
w) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, lo
w) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, lo
w) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, lo
w) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 20
04
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
hw_random hardware driver 1.0.0 loaded
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, lo
w) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 55484 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, lo
w) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.6 to 64
MC'97 1 converters and GPIO not ready (0xff00)
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, lo
w) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:00.0 [1014:0552]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.0, mfunc 0x01d21b22, devctl 0x64
Yenta: ISA IRQ mask 0x04f8, PCI irq 11
Socket status: 30000086
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
cs: IO port probe 0x4000-0x8fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, lo
w) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:00.1 [1014:0552]
Yenta: Using INTVAL to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:00.1, mfunc 0x01d21b22, devctl 0x64
Yenta: ISA IRQ mask 0x04f8, PCI irq 11
Socket status: 30000086
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
cs: IO port probe 0x4000-0x8fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
Real Time Clock Driver v1.12
irda_init()
NET: Registered protocol family 23
pcmcia: Detected deprecated PCMCIA ioctl usage.
pcmcia: This interface will soon be removed from the kernel; please exp
ect breakage unless you upgrade to new tools.
pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.
html for details.
cs: IO port probe 0x100-0x4ff: excluding 0x2f8-0x2ff 0x3b8-0x3df 0x4d0-
0x4d7
cs: IO port probe 0x100-0x4ff: excluding 0x2f8-0x2ff 0x3b8-0x3df 0x4d0-
0x4d7
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0x800-0x8ff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
eth0: no IPv6 routers present
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.6


Bjørn
--
You're probably homosexual yourself.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel"
in
the body of a message to majo...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Dmitry Torokhov

unread,
Nov 12, 2005, 10:23:53 AM11/12/05
to Bjørn Mork, linux-...@vger.kernel.org, Pavel Machek
On Saturday 12 November 2005 08:39, Bjørn Mork wrote:
> I have had swsusp working for ages on a IBM Thinkpad T42, but since
> 2.6.14 it hasn't been willing to resume anymore. Both suspending to
> disk and ACPI S3 still works.
>
> Output of dmesg below (running 2.6.15-rc1). Notice the line:
>
> Restarting tasks...<6> Strange, kseriod not stopped
>
> I guess that's the explanation. Could it be the new TrackPoint
> driver, maybe? (This PC has both a TrackPoint and a Touchpad).
>

This is unlikely... serio has the proper support for freezing as
far as I understand:

static int serio_thread(void *nothing)
{
do {
serio_handle_events();
wait_event_interruptible(serio_wait,
kthread_should_stop() || !list_empty(&serio_eve
nt_list));
try_to_freeze();
} while (!kthread_should_stop());

printk(KERN_DEBUG "serio: kseriod exiting\n");
return 0;
}

Pavel, any ideas?

--
Dmitry

Pavel Machek

unread,
Nov 12, 2005, 3:01:38 PM11/12/05
to Dmitry Torokhov, Bj?rn Mork, linux-...@vger.kernel.org
Hi!

> > I have had swsusp working for ages on a IBM Thinkpad T42, but since
> > 2.6.14 it hasn't been willing to resume anymore. Both suspending to
> > disk and ACPI S3 still works.
> >
> > Output of dmesg below (running 2.6.15-rc1). Notice the line:
> >
> > Restarting tasks...<6> Strange, kseriod not stopped
> >
> > I guess that's the explanation. Could it be the new TrackPoint
> > driver, maybe? (This PC has both a TrackPoint and a Touchpad).
> >
>
> This is unlikely... serio has the proper support for freezing as
> far as I understand:
>
> static int serio_thread(void *nothing)
> {
> do {
> serio_handle_events();
> wait_event_interruptible(serio_wait,
> kthread_should_stop() || !list_empty(&serio_event_list));
> try_to_freeze();
> } while (!kthread_should_stop());
>
> printk(KERN_DEBUG "serio: kseriod exiting\n");
> return 0;
> }
>
> Pavel, any ideas?

No, sorry. I'll try to reproduce it here (x32 notebook), but...

Pavel
--
Thanks, Sharp!

Pavel Machek

unread,
Nov 12, 2005, 6:48:43 PM11/12/05
to Dmitry Torokhov, Bj?rn Mork, linux-...@vger.kernel.org
Hi!

> This is unlikely... serio has the proper support for freezing as
> far as I understand:
>
> static int serio_thread(void *nothing)
> {
> do {
> serio_handle_events();
> wait_event_interruptible(serio_wait,
> kthread_should_stop() || !list_empty(&serio_event_list));
> try_to_freeze();
> } while (!kthread_should_stop());
>
> printk(KERN_DEBUG "serio: kseriod exiting\n");
> return 0;
> }
>
> Pavel, any ideas?

No ideas... it works for me on x32.
Pavel
--
Thanks, Sharp!

Bernd Donner

unread,
Nov 12, 2005, 7:49:37 PM11/12/05
to linux-...@vger.kernel.org
Hi!

I experienced the same problem on an Dell Inspiron 4100.
My dmesg output:

Linux version 2.6.14 (root@mindy) (gcc version 4.0.3 20051023 (prerelease)
(Debian 4.0.2-3)) #1 Sat Nov 12 23:01:16 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffd3000 (usable)
BIOS-e820: 000000000ffd3000 - 0000000010000000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65491
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61395 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 DELL ) @ 0x000fde50
ACPI: RSDT (v001 DELL CPi R 0x27d30510 ASL 0x00000061) @ 0x000fde64
ACPI: FADT (v001 DELL CPi R 0x27d30510 ASL 0x00000061) @ 0x000fde90
ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 20000000 (gap: 10000000:eeda0000)
Built 1 zonelists
Kernel command line: root=/dev/hda6 resume=/dev/hda5
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 863.799 MHz processor.


Using pmtmr for high-res timesource
Console: colour VGA+ 80x25

Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 256052k/261964k available (1989k kernel code, 5328k reserved, 550k
data, 140k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1728.84 BogoMIPS
(lpj=8644208)


Mount-cache hash table entries: 512

CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000
00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000
00000000 00000000
mtrr: v2.0 (20020519)
CPU: Intel(R) Pentium(R) III Mobile CPU 866MHz stepping 01


Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0800)
NET: Registered protocol family 16
ACPI: bus type pci registered

PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2
ACPI: Subsystem revision 20050902


ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing

ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)

ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH4 GPIO


PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)


ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: Power Resource [PADA] (on)


usbcore: registered new driver usbfs
usbcore: registered new driver hub

PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report

PCI: Bridge: 0000:00:01.0

IO window: c000-cfff
MEM window: fc000000-fdffffff
PREFETCH window: e0000000-e7ffffff
PCI: Bus 3, cardbus bridge: 0000:02:01.0
IO window: 0000e000-0000e0ff
IO window: 0000e400-0000e4ff
PREFETCH window: 20000000-21ffffff
MEM window: f4000000-f5ffffff
PCI: Bus 7, cardbus bridge: 0000:02:01.1
IO window: 0000e800-0000e8ff
IO window: 00001000-000010ff
PREFETCH window: 22000000-23ffffff
MEM window: f6000000-f7ffffff


PCI: Bridge: 0000:00:1e.0

IO window: e000-ffff
MEM window: f4000000-fbffffff
PREFETCH window: 20000000-24ffffff


PCI: Setting latency timer of device 0000:00:1e.0 to 64

PCI: Enabling device 0000:02:01.0 (0000 -> 0003)


ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11

PCI: setting IRQ 11 as level-triggered

ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKD] -> GSI 11 (level, low) ->
IRQ 11
PCI: Enabling device 0000:02:01.1 (0000 -> 0003)
ACPI: PCI Interrupt 0000:02:01.1[A] -> Link [LNKD] -> GSI 11 (level, low) ->
IRQ 11
Initializing Cryptographic API


ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)

ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PBTN]
ACPI: Sleep Button (CM) [SBTN]


ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])

ACPI: Thermal Zone [THM] (48 C)
Dell laptop SMM driver v1.14 21/02/2005 Massimo Dal Zotto (d...@debian.org)


Linux agpgart interface v0.101 (c) Dave Jones

agpgart: Detected an Intel 830M Chipset.


agpgart: AGP aperture is 256M @ 0xd0000000

[drm] Initialized drm 1.0.0 20040925

serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1

io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

ICH3M: IDE controller at PCI slot 0000:00:1f.1


PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)

ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11

ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
ICH3M: chipset revision 1
ICH3M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N020ATCS04-0, ATA DISK drive


ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...

hdc: TOSHIBA DVD-ROM SD-C2502, ATAPI CD/DVD-ROM drive


ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB

hda: 39070080 sectors (20003 MB) w/1768KiB Cache, CHS=38760/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)


Uniform CD-ROM driver Revision: 3.20

usbmon: debugfs is not available


USB Universal Host Controller Interface driver v2.3

ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->

IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1

uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80


hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected

mice: PS/2 mouse device common for all mice

NET: Registered protocol family 2

input: AT Translated Set 2 keyboard on isa0060/serio0
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)


TCP reno registered
TCP bic registered
NET: Registered protocol family 1

NET: Registered protocol family 17
NET: Registered protocol family 15
Using IPI Shortcut mode
Stopping tasks: ====<6>Synaptics Touchpad, model: 1, fw: 5.7, id: 0x9b48b1,
caps: 0x804793/0x0


serio: Synaptics pass-through port at isa0060/serio1/input0

input: SynPS/2 Synaptics TouchPad on isa0060/serio1

stopping tasks failed (1 tasks remaining)

Restarting tasks...<6> Strange, kseriod not stopped

done
ACPI wakeup devices:
LID PBTN PCI0 UAR1 USB0 USB1 USB2 MODM PCIE MPCI
ACPI: (supports S0 S1 S3 S4 S5)
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
IBM TrackPoint firmware: 0x0b, buttons: 2/3
input: TPPS/2 IBM TrackPoint on synaptics-pt/serio0
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block
18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: replayed 30 transactions in 12 seconds
ReiserFS: hda6: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 140k freed
Adding 618460k swap on /dev/hda5. Priority:-1 extents:1 across:618460k

hope that helps,
Bernd

Dmitry Torokhov

unread,
Nov 12, 2005, 8:53:53 PM11/12/05
to Pavel Machek, Bj?rn Mork, linux-...@vger.kernel.org
On Saturday 12 November 2005 15:39, Pavel Machek wrote:
> Hi!
>
> > This is unlikely... serio has the proper support for freezing as
> > far as I understand:
> >
> > static int serio_thread(void *nothing)
> > {
> > do {
> > serio_handle_events();
> > wait_event_interruptible(serio_wait,
> > kthread_should_stop() || !list_empty(&serio_event_list));
> > try_to_freeze();
> > } while (!kthread_should_stop());
> >
> > printk(KERN_DEBUG "serio: kseriod exiting\n");
> > return 0;
> > }
> >
> > Pavel, any ideas?
>
> No ideas... it works for me on x32.

Hmm, I just suspended/resumed twice in a row, everything wokrs just fine.
I also have a touchpoad and a trackpoint, as does the original poster...

--
Dmitry

Bjørn Mork

unread,
Nov 13, 2005, 5:10:40 AM11/13/05
to linux-...@vger.kernel.org
Dmitry Torokhov <dtor...@ameritech.net> writes:

> Hmm, I just suspended/resumed twice in a row, everything wokrs just f
ine.
> I also have a touchpoad and a trackpoint, as does the original poster
..

Let me know if there is something I can do to help spotting the
problem. Maybe my .config will help recreating it? The 2.6.15-rc1 one
looks like this (I've got the 2.6.14 version too. Let me know if that
is useful):

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.15-rc1
# Sat Nov 12 11:25:29 2005
#
CONFIG_X86_32=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Block layer
#
# CONFIG_LBD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUMM=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hda7"

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
CONFIG_ACPI_IBM=m
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m

#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=m

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
CONFIG_IP_ROUTE_MULTIPATH_RR=m
CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_DRR=m
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_PHYSDEV=m
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
CONFIG_IP_NF_MATCH_DCCP=m
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_MATCH_STRING=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
CONFIG_IP6_NF_TARGET_NFQUEUE=m

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m

#
# DCCP Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
# CONFIG_NET_ACT_IPT is not set
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
# CONFIG_DONGLE is not set

#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m

#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
CONFIG_NSC_FIR=m
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m

#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
# CONFIG_MTD_BLOCK is not set
# CONFIG_MTD_BLOCK_RO is not set
CONFIG_FTL=m
CONFIG_NFTL=m
# CONFIG_NFTL_RW is not set
# CONFIG_INFTL is not set
CONFIG_RFD_FTL=m

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_AMDSTD_RETRY=0
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_SC520CDP is not set
# CONFIG_MTD_AMD76XROM is not set
CONFIG_MTD_ICHXROM=m
# CONFIG_MTD_SCB2_FLASH is not set
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
# CONFIG_MTD_PLATRAM is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set

#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set

#
# OneNAND Flash Device Drivers
#
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_LXT_PHY=m
# CONFIG_CICADA_PHY is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
# CONFIG_ULI526X is not set
# CONFIG_PCMCIA_XIRCOM is not set
# CONFIG_PCMCIA_XIRTULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000_NAPI=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
CONFIG_TR=y
# CONFIG_IBMTR is not set
# CONFIG_IBMOL is not set
# CONFIG_IBMLS is not set
# CONFIG_3C359 is not set
# CONFIG_TMS380TR is not set
# CONFIG_SMCTR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set
# CONFIG_PCMCIA_WAVELAN is not set
# CONFIG_PCMCIA_NETWAVE is not set

#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_AIRO is not set
CONFIG_HERMES=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
# CONFIG_PCI_HERMES is not set
# CONFIG_ATMEL is not set

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
# CONFIG_PCMCIA_SPECTRUM is not set
CONFIG_AIRO_CS=m
# CONFIG_PCMCIA_WL3501 is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_PLX=m
# CONFIG_HOSTAP_PCI is not set
CONFIG_HOSTAP_CS=m
CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
CONFIG_PCMCIA_IBMTR=m

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m

#
# TPM devices
#
CONFIG_TCG_TPM=m
# CONFIG_TCG_NSC is not set
CONFIG_TCG_ATMEL=m
# CONFIG_TCG_INFINEON is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_HDAPS=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia Capabilities Port drivers
#

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
CONFIG_FONT_SUN8x16=y
CONFIG_FONT_SUN12x22=y
# CONFIG_FONT_10x18 is not set
# CONFIG_FONT_RL is not set

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_DEVICE=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_GENERIC_DRIVER=y

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_USX2Y is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_ZD1201 is not set
CONFIG_USB_MON=y

#
# USB port drivers
#

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# SN Devices
#

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=m
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_EARLY_PRINTK=y

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y

Bjørn
--
You have the pedantic rotten spelling of a meathead.

Jacek Kawa

unread,
Nov 13, 2005, 7:14:03 AM11/13/05
to linux-...@vger.kernel.org
Bernd Donner wrote:

> I experienced the same problem on an Dell Inspiron 4100.

I was about to report the same (?) issue, heh...

0. It's Compaq Armada 110
1. All -rcs up to 4th work fine, while -rc5, -final, -stable2 doesn't
(well, I did suspend and resume correctly just once with stable2:
restart, login, modprobe -r uhci_hcd, sync, sync, suspend)
2. While resuming, all seems to freeze while "Stopping tasks: =============..."
appears on the screen; no sysrq

More details:

short hibernating script:
-------------------------
http://zeus.polsl.gliwice.pl/~jfk/kernel/hib

config:
-------
http://zeus.polsl.gliwice.pl/~jfk/kernel/config-2.6.14-rc4-laptop
and went through oldconfig without changes (+# CONFIG_AIRO is not set)
lspci:
------
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10)
0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 20)
0000:00:09.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 09)
0000:00:09.1 Serial controller: Agere Systems LT WinModem
0000:00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01)
0000:01:00.0 VGA compatible controller: Trident Microsystems CyberBlade i1 (rev 6a)

lspci -v ...
------------
http://zeus.polsl.gliwice.pl/~jfk/kernel/lspci-v
http://zeus.polsl.gliwice.pl/~jfk/kernel/lspci-v-v
http://zeus.polsl.gliwice.pl/~jfk/kernel/lspci-v-v-v


dmesg (there is no difference in dmesg betwen -rc4 and -rc5)
------------------------------------------------------------

Linux version 2.6.14-rc5-laptop (jfk@finwe) (gcc version 4.0.3 20051023 (prerelease) (Debian 4.0.2-3)) #4 PREEMPT Fri Nov 11 21:08:03 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e9c00 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
BIOS-e820: 000000000f7f0000 - 000000000f7ffc00 (ACPI data)
BIOS-e820: 000000000f7ffc00 - 000000000f800000 (ACPI NVS)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
247MB LOWMEM available.
On node 0 totalpages: 63472


DMA zone: 4096 pages, LIFO batch:1

Normal zone: 59376 pages, LIFO batch:31


HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.

ACPI: RSDP (v000 PTLTD ) @ 0x000f6e90
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x0f7fbdc2
ACPI: FADT (v001 COMPAQ Borg 0x06040000 PTL_ 0x000f4240) @ 0x0f7ffb64
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x0f7ffbd8
ACPI: DSDT (v001 Compaq Wrangler 0x06040000 MSFT 0x0100000d) @ 0x00000000
Allocating PCI resources starting at 10000000 (gap: 0f800000:f07e0000)
Built 1 zonelists
Kernel command line: root=/dev/hda5 ro nolapic pci=noacpi pmdisk=/dev/hda9 resume=/dev/hda9
mapped APIC to ffffd000 (011f1000)
Initializing CPU#0
CPU 0 irqstacks, hard=c0378000 soft=c0377000


PID hash table entries: 1024 (order: 10, 16384 bytes)

Detected 846.914 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 248340k/253888k available (1801k kernel code, 4980k reserved, 549k data, 148k init, 0k highmem)


Checking if this processor honours the WP bit even in supervisor mode... Ok.

Calibrating delay using timer specific routine.. 1696.68 BogoMIPS (lpj=848344)
Security Framework v1.0.0 initialized
Capability LSM initialized


Mount-cache hash table entries: 512

CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000


CPU: L1 I cache: 16K, L1 D cache: 16K

CPU: L2 cache: 256K
CPU serial number disabled.


CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000

Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)

CPU: Intel Pentium III (Coppermine) stepping 06


Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.

ACPI: setting ELCR to 0e00 (from 0a00)


NET: Registered protocol family 16
ACPI: bus type pci registered

PCI: PCI BIOS revision 2.10 entry at 0xfd83e, last bus=1


PCI: Using configuration type 1

ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing

(gpe 1)
(on)


Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init

pnp: PnP ACPI: found 13 devices


usbcore: registered new driver usbfs
usbcore: registered new driver hub

PCI: Probing PCI hardware


PCI: Probing PCI hardware (bus 00)

Boot video device is 0000:01:00.0

at 0000:00:07.0
PCI: IRQ 0 for device 0000:00:0a.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 11 for device 0000:00:0a.0
PCI: Sharing IRQ 11 with 0000:00:07.2
pnp: 00:05: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:05: ioport range 0x220-0x22f has been reserved
pnp: 00:05: ioport range 0x388-0x38b has been reserved
pnp: 00:05: ioport range 0x8000-0x808f could not be reserved
pnp: 00:05: ioport range 0x9050-0x9051 has been reserved
pnp: 00:0a: ioport range 0x958-0x96f has been reserved


PCI: Bridge: 0000:00:01.0

IO window: disabled.
MEM window: f4100000-f57fffff
PREFETCH window: 14000000-140fffff
PCI: Bus 2, cardbus bridge: 0000:00:0a.0
IO window: 00002000-00002fff
IO window: 00003000-00003fff
PREFETCH window: 10000000-11ffffff
MEM window: 12000000-13ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Enabling device 0000:00:0a.0 (0000 -> 0003)
PCI: Found IRQ 11 for device 0000:00:0a.0
PCI: Sharing IRQ 11 with 0000:00:07.2
Simple Boot Flag at 0x37 set to 0x1
Initializing Cryptographic API
PCI: Disabling Via external APIC routing
at 0x60,0x64 irq 1,12


serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1
ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N040ATCS04-0, ATA DISK drive


ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...

hdc: LG DVD-ROM DRN-8060B, ATAPI CD/DVD-ROM drive


ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB

hda: 78140160 sectors (40007 MB) w/1768KiB Cache, CHS=65535/16/63, UDMA(33)


hda: cache flushes not supported

hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >
hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33)


Uniform CD-ROM driver Revision: 3.20

NET: Registered protocol family 2

IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered


NET: Registered protocol family 1
NET: Registered protocol family 17

Using IPI Shortcut mode
ACPI wakeup devices:
PWRB LID PCI0 USB0 MODM PMOD CRD0
ACPI: (supports S0 S1 S4 S5)


input: AT Translated Set 2 keyboard on isa0060/serio0

EXT3-fs: mounted filesystem with ordered data mode.

VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 148k freed


kjournald starting. Commit interval 5 seconds

Adding 265032k swap on /dev/hda9. Priority:-1 extents:1 across:265032k


EXT3 FS on hda5, internal journal

pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new driver pegasus


mice: PS/2 mouse device common for all mice

USB Universal Host Controller Interface driver v2.3

PCI: Found IRQ 11 for device 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:0a.0
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x00001440


hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected

input: PS/2 Synaptics TouchPad on isa0060/serio1


Real Time Clock Driver v1.12

Generic RTC Driver v1.07


kjournald starting. Commit interval 5 seconds

EXT3 FS on hda1, internal journal


EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.

loop: loaded (max 8 devices)
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on loop0, internal journal


EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

kjournald starting. Commit interval 5 seconds

EXT3 FS on hda7, internal journal


EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds

EXT3 FS on hda8, internal journal


EXT3-fs: mounted filesystem with ordered data mode.

parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x0
parport_pc: VIA parallel port disabled in BIOS
parport: PnPBIOS parport detected.

via686a 0000:00:07.4: base address not set - upgrade BIOS or use force_addr=0xaddr
PCI: Found IRQ 9 for device 0000:00:07.5
PCI: Setting latency timer of device 0000:00:07.5 to 64
e100: Intel(R) PRO/100 Network Driver, 3.4.14-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
PCI: Found IRQ 11 for device 0000:00:09.0
PCI: Sharing IRQ 11 with 0000:00:09.1
e100: eth0: e100_probe: addr 0xf4020000, irq 11, MAC addr 00:D0:59:66:88:17
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PCI: Found IRQ 11 for device 0000:00:09.1
PCI: Sharing IRQ 11 with 0000:00:09.0
PCI: Found IRQ 11 for device 0000:00:0a.0
PCI: Sharing IRQ 11 with 0000:00:07.2

Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI


Yenta: Routing CardBus interrupts to PCI

Yenta TI: socket 0000:00:0a.0, mfunc 0x00001012, devctl 0x64
Yenta: ISA IRQ mask 0x0038, PCI irq 11
Socket status: 30000006
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex


pcmcia: Detected deprecated PCMCIA ioctl usage.

pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.

ver-linux
---------

Linux miriel 2.6.14-rc4-laptop #5 PREEMPT Fri Nov 11 21:36:41 CET 2005 i686 GNU/Linux

Gnu C 4.0.3
Gnu make 3.80
binutils 2.16.91
util-linux 2.12p
mount 2.12p
module-init-tools 3.2-pre9
e2fsprogs 1.38
reiserfsprogs line
reiser4progs line
pcmcia-cs 3.2.8
PPP 2.4.3
Linux C Library 2.3.5
Dynamic linker (ldd) 2.3.5
Procps 3.2.6
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 5.2.1
Modules Loaded uhci_hcd floppy sd_mod scsi_mod ipx p8022 psnap llc thermal fan button processor ac battery ipt_multiport ipt_state ipt_pkttype ipt_LOG ipt_limit ipt_REJECT iptable_nat ip_nat iptable_filter ip_tables ip_conntrack_ftp ip_conntrack nfnetlink pcmcia firmware_class crc32 8250_pnp yenta_socket rsrc_nonstatic pcmcia_core 8250_pci 8250 serial_core e100 snd_seq_oss snd_seq_midi snd_seq_midi_event snd_seq snd_via82xx gameport snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore via686a i2c_isa i2c_core parport_pc parport nls_iso8859_2 nls_cp852 vfat fat loop rtc psmouse mousedev pegasus mii

bye!

--
Jacek Kawa **The real trouble with reality is that
there's no background music.**

Dmitry Torokhov

unread,
Nov 17, 2005, 4:57:52 PM11/17/05
to Bjørn Mork, linux-...@vger.kernel.org, Pavel Machek
On 11/12/05, Bjørn Mork <bm...@dod.no> wrote:
> IPv6 over IPv4 tunneling driver
> NET: Registered protocol family 17
> Using IPI Shortcut mode
> Stopping tasks: ===<6>Synaptics Touchpad, model: 1, fw: 5.9, id
: 0x2c6ab1, caps: 0x884793/0x0
> serio: Synaptics pass-through port at isa0060/serio1/input0
> input: SynPS/2 Synaptics TouchPad as /class/input/input1
>
> stopping tasks failed (1 tasks remaining)
> Restarting tasks...<6> Strange, kseriod not stopped
> done

Crazy idea - did you let it finish booting or you hit suspend as soon
as you could? It looks like kseriod was busy discovering your
touchpad/trackpoint for the first time...

Anyway, Pavel, I think 6 seconds it too short of a timeout for
stopping all tasks. PS/2 is pretty slow, trackpad reset can take up to
2 seconds alone...

Bjorn, does it help if you change TIMEOUT in kernel/power/process.c to
30 * HZ?

--
Dmitry

Bjørn Mork

unread,
Nov 18, 2005, 4:38:33 AM11/18/05
to linux-...@vger.kernel.org
Dmitry Torokhov <dmitry....@gmail.com> writes:
> On 11/12/05, Bjørn Mork <bm...@dod.no> wrote:
>> IPv6 over IPv4 tunneling driver
>> NET: Registered protocol family 17
>> Using IPI Shortcut mode
>> Stopping tasks: ===<6>Synaptics Touchpad, model: 1, fw: 5.9, i
d: 0x2c6ab1, caps: 0x884793/0x0

>> serio: Synaptics pass-through port at isa0060/serio1/input0
>> input: SynPS/2 Synaptics TouchPad as /class/input/input1
>>
>> stopping tasks failed (1 tasks remaining)
>> Restarting tasks...<6> Strange, kseriod not stopped
>> done
>
> Crazy idea - did you let it finish booting or you hit suspend as soon
> as you could? It looks like kseriod was busy discovering your
> touchpad/trackpoint for the first time...

The boot was complete, even including X running.

> Anyway, Pavel, I think 6 seconds it too short of a timeout for
> stopping all tasks. PS/2 is pretty slow, trackpad reset can take up t
o
> 2 seconds alone...
>
> Bjorn, does it help if you change TIMEOUT in kernel/power/process.c t
o 30 * HZ?

Yup. Resume is working with this change in an otherwise unchanged
2.6.15-rc1, so that seems to be it.

Thanks.


Bjørn
--
You sound like a real weakling.

Bernd Donner

unread,
Nov 18, 2005, 6:27:27 AM11/18/05
to linux-...@vger.kernel.org
On Thursday 17 November 2005 22:57, Dmitry Torokhov wrote:
> Crazy idea - did you let it finish booting or you hit suspend as soon
> as you could? It looks like kseriod was busy discovering your
> touchpad/trackpoint for the first time...

I did let it finish booting. Since the resume failed, i patiently waited for
fsck and X startup to finish.

> Anyway, Pavel, I think 6 seconds it too short of a timeout for
> stopping all tasks. PS/2 is pretty slow, trackpad reset can take up to
> 2 seconds alone...
>
> Bjorn, does it help if you change TIMEOUT in kernel/power/process.c to 30 *
> HZ?

Increasing the TIMEOUT to 30 seconds on an 2.6.14 kernel does solve the
reported problem for me. The resume now succeeds.

Thanks
Bernd

Pavel Machek

unread,
Nov 18, 2005, 6:44:22 AM11/18/05
to dtor...@ameritech.net, Bj?rn Mork, linux-...@vger.kernel.org
Hi!

> > IPv6 over IPv4 tunneling driver
> > NET: Registered protocol family 17
> > Using IPI Shortcut mode
> > Stopping tasks: ===<6>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
> > serio: Synaptics pass-through port at isa0060/serio1/input0
> > input: SynPS/2 Synaptics TouchPad as /class/input/input1
> >
> > stopping tasks failed (1 tasks remaining)
> > Restarting tasks...<6> Strange, kseriod not stopped
> > done
>
> Crazy idea - did you let it finish booting or you hit suspend as soon
> as you could? It looks like kseriod was busy discovering your
> touchpad/trackpoint for the first time...
>
> Anyway, Pavel, I think 6 seconds it too short of a timeout for
> stopping all tasks. PS/2 is pretty slow, trackpad reset can take up to
> 2 seconds alone...
>
> Bjorn, does it help if you change TIMEOUT in kernel/power/process.c to 30 * HZ?

Funny, I thought that 6 seconds is way too much. Bjorn, please let us
know if 30 seconds timeout helps.
Pavel
--
Thanks, Sharp!

Bjørn Mork

unread,
Nov 18, 2005, 6:48:10 AM11/18/05
to Pavel Machek, dtor...@ameritech.net, linux-...@vger.kernel.org
Pavel Machek <pa...@ucw.cz> writes:

>> Bjorn, does it help if you change TIMEOUT in kernel/power/process.c
to 30 * HZ?
>
> Funny, I thought that 6 seconds is way too much. Bjorn, please let us
> know if 30 seconds timeout helps.

It does.


Bjørn

Pavel Machek

unread,
Nov 18, 2005, 1:32:17 PM11/18/05
to Bj?rn Mork, dtor...@ameritech.net, linux-...@vger.kernel.org
Hi!

> >> Bjorn, does it help if you change TIMEOUT in kernel/power/process.c to 30 * HZ?
> >
> > Funny, I thought that 6 seconds is way too much. Bjorn, please let us
> > know if 30 seconds timeout helps.
>
> It does.

Ouch, yes, that's clear. It is stopping tasks during *resume*... So I
guess it gets wrong timing by design. Question is what to do with
that. Could we make keyboard driver pause the boot until it is done
resetting hardware? Or we can increase the timeout... would 10 seconds
be enough?
Pavel
--
Thanks, Sharp!

Pavel Machek

unread,
Nov 20, 2005, 4:23:25 PM11/20/05
to dtor...@ameritech.net, Pavel Machek, Bj?rn Mork, linux-...@vger.kernel.org
Hi!

> > > >> Bjorn, does it help if you change TIMEOUT in kernel/power/process.c to 30 * HZ?
> > > >
> > > > Funny, I thought that 6 seconds is way too much. Bjorn, please let us
> > > > know if 30 seconds timeout helps.
> > >
> > > It does.
> >
> > Ouch, yes, that's clear. It is stopping tasks during *resume*... So I
> > guess it gets wrong timing by design. Question is what to do with
> > that. Could we make keyboard driver pause the boot until it is done
> > resetting hardware? Or we can increase the timeout... would 10 seconds
> > be enough?
>

> Well, I think 10 seconds when suspending is a nice and resonable
> number. For resume though I think we should wait much longer, maybe
> even indefinitely - the only thing that timeout achieves is makes
> people fsck because the system can't recover from that state.

I see your point, but it does not seem we need that changes this far. Your
patch is better, because we *could* hit that during suspend, just after
keyboard hotplug... right? And it will make resume faster for affected people.

--
64 bytes from 195.113.31.123: icmp_seq=28 ttl=51 time=448769.1 ms

Dmitry Torokhov

unread,
Nov 22, 2005, 12:27:28 AM11/22/05
to Pavel Machek, Pavel Machek, Bj?rn Mork, linux-...@vger.kernel.org
On Saturday 19 November 2005 18:48, Pavel Machek wrote:
> Hi!
>
> > > > >> Bjorn, does it help if you change TIMEOUT in kernel/power/process.c to 30 * HZ?
> > > > >
> > > > > Funny, I thought that 6 seconds is way too much. Bjorn, please let us
> > > > > know if 30 seconds timeout helps.
> > > >
> > > > It does.
> > >
> > > Ouch, yes, that's clear. It is stopping tasks during *resume*... So I
> > > guess it gets wrong timing by design. Question is what to do with
> > > that. Could we make keyboard driver pause the boot until it is done
> > > resetting hardware? Or we can increase the timeout... would 10 seconds
> > > be enough?
> >
> > Well, I think 10 seconds when suspending is a nice and resonable
> > number. For resume though I think we should wait much longer, maybe
> > even indefinitely - the only thing that timeout achieves is makes
> > people fsck because the system can't recover from that state.
>
> I see your point, but it does not seem we need that changes this far. Your
> patch is better, because we *could* hit that during suspend, just after
> keyboard hotplug... right? And it will make resume faster for affected people.
>

Pavel,

I disagree here. While my patch is a right thing to do (and as you
know is already merged in mainline) it is not "better". Swsusp should
not rely on the other subsystems being "nice" to it. Even with my
patch there still could be moments when some thread is not suspended
in 6 seconds when resuming causing unneeded resume failure and
subsequent fsck.

Please consider merging the patch below.

--
Dmitry

Swsusp: do not time-out when stopping tasks while resuming

When stopping tasks during esume process there is no point of
eastablishing a timeout because teh process is past the point
of no return; there is no possible recovery from failure. If
stopping tasks fails resume is aborted and user is forced to
do fsck anyway.

Signed-off-by: Dmitry Torokhov <dt...@mail.ru>
---

include/linux/sched.h | 4 ----
kernel/power/power.h | 2 +-
kernel/power/process.c | 6 ++++--
3 files changed, 5 insertions(+), 7 deletions(-)

Index: work/include/linux/sched.h
===================================================================
--- work.orig/include/linux/sched.h
+++ work/include/linux/sched.h
@@ -1434,8 +1434,6 @@ static inline void frozen_process(struct
}

extern void refrigerator(void);
-extern int freeze_processes(void);
-extern void thaw_processes(void);

static inline int try_to_freeze(void)
{
@@ -1453,8 +1451,6 @@ static inline int thaw_process(struct ta
static inline void frozen_process(struct task_struct *p) { BUG(); }

static inline void refrigerator(void) {}
-static inline int freeze_processes(void) { BUG(); return 0; }
-static inline void thaw_processes(void) {}

static inline int try_to_freeze(void) { return 0; }

Index: work/kernel/power/power.h
===================================================================
--- work.orig/kernel/power/power.h
+++ work/kernel/power/power.h
@@ -48,7 +48,7 @@ static struct subsys_attribute _name##_a

extern struct subsystem power_subsys;

-extern int freeze_processes(void);
+extern int freeze_processes(suspend_state_t state);
extern void thaw_processes(void);

extern int pm_prepare_console(void);
Index: work/kernel/power/process.c
===================================================================
--- work.orig/kernel/power/process.c
+++ work/kernel/power/process.c
@@ -55,15 +55,17 @@ void refrigerator(void)
}

/* 0 = success, else # of processes that we failed to stop */
-int freeze_processes(void)
+int freeze_processes(suspend_state_t state)
{
int todo;
unsigned long start_time;
+ unsigned int timeout;
struct task_struct *g, *p;
unsigned long flags;

printk( "Stopping tasks: " );
start_time = jiffies;
+ timeout = state == PM_SUSPEND_ON ? 0 : 6 * HZ;
do {
todo = 0;
read_lock(&tasklist_lock);
@@ -81,7 +83,7 @@ int freeze_processes(void)
} while_each_thread(g, p);
read_unlock(&tasklist_lock);
yield(); /* Yield is okay here */
- if (todo && time_after(jiffies, start_time + TIMEOUT)) {
+ if (todo && timeout && time_after(jiffies, start_time + timeout)) {
printk( "\n" );
printk(KERN_ERR " stopping tasks failed (%d tasks remaining)\n", todo );
break;

Bjørn Mork

unread,
Nov 22, 2005, 4:01:37 AM11/22/05
to linux-...@vger.kernel.org
Dmitry Torokhov <dtor...@ameritech.net> writes:

> Swsusp: do not time-out when stopping tasks while resuming
>
> When stopping tasks during esume process there is no point of
> eastablishing a timeout because teh process is past the point
> of no return; there is no possible recovery from failure. If
> stopping tasks fails resume is aborted and user is forced to
> do fsck anyway.

If a clueless users voice counts for anything: I couldn't agree more.

A failed resume is a near catastrophy if you use and trust swsusp. And
how could it ever be useful if you don't?

I would much prefer a very long (indefinite) timeout, and to manually
have to force a reboot without resume. This is an absolutely last
resort and there is no need whatsoever to automatically go there.
Maybe that even would give me a chance to fix some hardware problem
causing the timeout, and then retry the resume.

Please do everything possible to ensure that a resume will never fail
unnecessarily. I can't see how some arbitrary timeout could be
necessary.

Just my 2 øre.


Bjørn
--
Cardboard cut-outs are fun, huh? So, a short man ain't got nothing in
the world these days?

Pavel Machek

unread,
Nov 22, 2005, 12:47:23 PM11/22/05
to Bj?rn Mork, linux-...@vger.kernel.org
Hi!

[Please Cc me if you want fast reply.]

> > Swsusp: do not time-out when stopping tasks while resuming
> >
> > When stopping tasks during esume process there is no point of
> > eastablishing a timeout because teh process is past the point
> > of no return; there is no possible recovery from failure. If
> > stopping tasks fails resume is aborted and user is forced to
> > do fsck anyway.
>
> If a clueless users voice counts for anything: I couldn't agree more.
>
> A failed resume is a near catastrophy if you use and trust swsusp. And
> how could it ever be useful if you don't?

Failed resume is only as bad as powerfail.

> Maybe that even would give me a chance to fix some hardware problem
> causing the timeout, and then retry the resume.

.while doing resume few times, trying to change hw config to make it
resume is _way_ more dangerous.
Pavel
--
Thanks, Sharp!

Bjørn Mork

unread,
Nov 22, 2005, 1:42:23 PM11/22/05
to Pavel Machek, linux-...@vger.kernel.org
Pavel Machek <pa...@ucw.cz> writes:

>> A failed resume is a near catastrophy if you use and trust swsusp. A
nd
>> how could it ever be useful if you don't?
>
> Failed resume is only as bad as powerfail.

Sure. I can live with a failed resume. I just don't see it as a fix
for anything. IMHO it's the worst possible option available when
trying to resume, so it should not be chosen too easily.

(I don't really have any powerfail situations as long as swsusp works.
I use an ACPI alarm to suspend when remaing battery charge is low)

>> Maybe that even would give me a chance to fix some hardware problem
>> causing the timeout, and then retry the resume.
>

> ..while doing resume few times, trying to change hw config to make it


> resume is _way_ more dangerous.

I guess it would be. But then, what are the chances it would make the
situation any worse? Probably never would work, but at least I would
get the satisfaction of *trying* :-)

Falling back to a clean reboot would still be an option if everything
else failed.

That said, until 2.6.14 I had never ever experienced a failed resume
with this laptop. So I don't really believe it would happen again,
given that the timout doesn't continue to cause unnecessary failures.

Thanks for all the good work! I've been running Linux on a number of
laptops since 1998 and am most impressed by the swsusp evolution the
last few years. Things weren't too bad when APM used to work and
"lots of RAM" meant 80GB, but today I don't think I could use a laptop
without swsusp.


Bjørn

Dmitry Torokhov

unread,
Nov 22, 2005, 1:46:28 PM11/22/05
to Pavel Machek, Bj?rn Mork, linux-...@vger.kernel.org
On 11/22/05, Pavel Machek <pa...@ucw.cz> wrote:
> Hi!
>
> [Please Cc me if you want fast reply.]
>
> > > Swsusp: do not time-out when stopping tasks while resuming
> > >
> > > When stopping tasks during esume process there is no point of
> > > eastablishing a timeout because teh process is past the point
> > > of no return; there is no possible recovery from failure. If
> > > stopping tasks fails resume is aborted and user is forced to
> > > do fsck anyway.
> >
> > If a clueless users voice counts for anything: I couldn't agree more.
> >
> > A failed resume is a near catastrophy if you use and trust swsusp. And
> > how could it ever be useful if you don't?
>
> Failed resume is only as bad as powerfail.
>

So? I don't like powerfails either. Could you please answer this
question - what pros of having resume process time out do you
envision? What problems does it help to solve?

> > Maybe that even would give me a chance to fix some hardware problem
> > causing the timeout, and then retry the resume.
>

> ..while doing resume few times, trying to change hw config to make it


> resume is _way_ more dangerous.

And still we have to do our best to support it. There is USB,
Firewire, Docking station that may appear/disappear while box is
suspended and we absolutely need to support this. Requiring that
hardware configuration has to be frozen between suspend/resume cycles
will not get us far.

--
Dmitry

Pavel Machek

unread,
Nov 22, 2005, 1:48:15 PM11/22/05
to Dmitry Torokhov, Bj?rn Mork, linux-...@vger.kernel.org
Hi!

> > > > > >> Bjorn, does it help if you change TIMEOUT in kernel/power/process.c to 30 * HZ?
> > > > > >
> > > > > > Funny, I thought that 6 seconds is way too much. Bjorn, please let us
> > > > > > know if 30 seconds timeout helps.
> > > > >
> > > > > It does.
> > > >
> > > > Ouch, yes, that's clear. It is stopping tasks during *resume*... So I
> > > > guess it gets wrong timing by design. Question is what to do with
> > > > that. Could we make keyboard driver pause the boot until it is done
> > > > resetting hardware? Or we can increase the timeout... would 10 seconds
> > > > be enough?
> > >
> > > Well, I think 10 seconds when suspending is a nice and resonable
> > > number. For resume though I think we should wait much longer, maybe
> > > even indefinitely - the only thing that timeout achieves is makes
> > > people fsck because the system can't recover from that state.
> >
> > I see your point, but it does not seem we need that changes this far. Your
> > patch is better, because we *could* hit that during suspend, just after
> > keyboard hotplug... right? And it will make resume faster for affected people.
>

> I disagree here. While my patch is a right thing to do (and as you
> know is already merged in mainline) it is not "better". Swsusp should
> not rely on the other subsystems being "nice" to it. Even with my
> patch there still could be moments when some thread is not suspended
> in 6 seconds when resuming causing unneeded resume failure and
> subsequent fsck.
>
> Please consider merging the patch below.

Well, I do not think this problem will surface again. It is first
failure in pretty long time. If it happens again, I'll take your
patch.
Pavel
--
Thanks, Sharp!

Pavel Machek

unread,
Nov 22, 2005, 1:56:07 PM11/22/05
to Bj?rn Mork, linux-...@vger.kernel.org
Hi!

> >> Maybe that even would give me a chance to fix some hardware problem
> >> causing the timeout, and then retry the resume.
> >
> > ..while doing resume few times, trying to change hw config to make it
> > resume is _way_ more dangerous.
>
> I guess it would be. But then, what are the chances it would make the
> situation any worse? Probably never would work, but at least I would

Yes, you could make the situation worse -- if you actually
succeeded. We are talking silent corruption on filesystem here...

("swsusp gives you enough rope to blow up small town")...

> Thanks for all the good work! I've been running Linux on a number of
> laptops since 1998 and am most impressed by the swsusp evolution the
> last few years. Things weren't too bad when APM used to work and
> "lots of RAM" meant 80GB, but today I don't think I could use a laptop
> without swsusp.

Thanks. (I'd still like to see that 80GB laptop :-).
Pavel
--
Thanks, Sharp!

Pavel Machek

unread,
Nov 22, 2005, 2:01:53 PM11/22/05
to dtor...@ameritech.net, Bj?rn Mork, linux-...@vger.kernel.org
Hi!

> > > If a clueless users voice counts for anything: I couldn't agree more.
> > >
> > > A failed resume is a near catastrophy if you use and trust swsusp. And
> > > how could it ever be useful if you don't?
> >
> > Failed resume is only as bad as powerfail.
>
> So? I don't like powerfails either. Could you please answer this
> question - what pros of having resume process time out do you
> envision? What problems does it help to solve?

No advantages, really.. except that it keeps suspend and resume paths
similar, and keeps the code simple. I'll want to call this from
userland and I'd hate to have two different calls or call with
parameter.

> > > Maybe that even would give me a chance to fix some hardware problem
> > > causing the timeout, and then retry the resume.
> >
> > ..while doing resume few times, trying to change hw config to make it
> > resume is _way_ more dangerous.
>
> And still we have to do our best to support it. There is USB,
> Firewire, Docking station that may appear/disappear while box is
> suspended and we absolutely need to support this. Requiring that
> hardware configuration has to be frozen between suspend/resume cycles
> will not get us far.

You may plug/unplug things that are hot-pluggable. If you do something
else (imagine adding or worse removing ram from the system), or do
something "interesting" (boot freebsd, mount ext3 partition,
..)... you loose your data.
Pavel
--
Thanks, Sharp!

Dmitry Torokhov

unread,
Nov 22, 2005, 2:09:31 PM11/22/05
to Pavel Machek, Bj?rn Mork, linux-...@vger.kernel.org
On 11/22/05, Pavel Machek <pa...@suse.cz> wrote:
> Hi!
>
> > > > If a clueless users voice counts for anything: I couldn't agree more.
> > > >
> > > > A failed resume is a near catastrophy if you use and trust swsusp. And
> > > > how could it ever be useful if you don't?
> > >
> > > Failed resume is only as bad as powerfail.
> >
> > So? I don't like powerfails either. Could you please answer this
> > question - what pros of having resume process time out do you
> > envision? What problems does it help to solve?
>
> No advantages, really.. except that it keeps suspend and resume paths
> similar, and keeps the code simple. I'll want to call this from
> userland and I'd hate to have two different calls or call with
> parameter.
>

Passing a parameter from userspace - is it so hard? Oh well, if you
prefer to leave this as a time bomb ready to explode - so be it.

--
Dmitry

Dmitry Torokhov

unread,
Nov 22, 2005, 3:38:20 PM11/22/05
to Pavel Machek, Bj?rn Mork, linux-...@vger.kernel.org
On 11/22/05, Dmitry Torokhov <dmitry....@gmail.com> wrote:
> On 11/22/05, Pavel Machek <pa...@suse.cz> wrote:
> > Hi!
> >
> > > > > If a clueless users voice counts for anything: I couldn't agree more.
> > > > >
> > > > > A failed resume is a near catastrophy if you use and trust swsusp. And
> > > > > how could it ever be useful if you don't?
> > > >
> > > > Failed resume is only as bad as powerfail.
> > >
> > > So? I don't like powerfails either. Could you please answer this
> > > question - what pros of having resume process time out do you
> > > envision? What problems does it help to solve?
> >
> > No advantages, really.. except that it keeps suspend and resume paths
> > similar, and keeps the code simple. I'll want to call this from
> > userland and I'd hate to have two different calls or call with
> > parameter.
> >
>
> Passing a parameter from userspace - is it so hard? Oh well, if you
> prefer to leave this as a time bomb ready to explode - so be it.
>

I think my words were a tad too strong. I apologize.

Rafael J. Wysocki

unread,
Nov 22, 2005, 5:15:23 PM11/22/05
to linux-...@vger.kernel.org, Pavel Machek, Dmitry Torokhov, Bj?rn Mork
Hi,

If so, could you please make it printk() a message after the timeout has
passed? This way the user will know what's going on at least.

Greetings,
Rafael

Pavel Machek

unread,
Nov 22, 2005, 5:52:02 PM11/22/05
to Rafael J. Wysocki, linux-...@vger.kernel.org, Dmitry Torokhov, Bj?rn Mork
Hi!

> > Well, I do not think this problem will surface again. It is first
> > failure in pretty long time. If it happens again, I'll take your
> > patch.
>
> If so, could you please make it printk() a message after the timeout has
> passed? This way the user will know what's going on at least.

We do have messages there, they even tell you name of process that was
not stopped. That's enough to debug failure quickly.
Pavel
--
Thanks, Sharp!

Bjørn Mork

unread,
Nov 23, 2005, 5:13:12 AM11/23/05
to Pavel Machek, Rafael J. Wysocki, linux-...@vger.kernel.org, Dmitry Torokhov
Pavel Machek <pa...@suse.cz> writes:

>> > Well, I do not think this problem will surface again. It is first
>> > failure in pretty long time. If it happens again, I'll take your
>> > patch.
>>
>> If so, could you please make it printk() a message after the timeout
has
>> passed? This way the user will know what's going on at least.
>
> We do have messages there, they even tell you name of process that wa
s
> not stopped. That's enough to debug failure quickly.

I don't think so. The example said

"Strange, kseriod not stopped"

This names a process that admittedly took a long time to stop, but not
the real *cause* of the failure. There was nothing wrong with kseriod.

FWIW, debugging this was way out of my league. I might have had a
better chance if it mentioned a short, fixed timeout. I also noticed
that it wasn't very obvious to you either at first. The first thought
was a failing serio driver, although that admittedly might be because
I mislead you in my attempt to pinpoint the failure.

But my first post in this thread *did* include the printk() you
mention above, so it should have been possible to debug it quickly...


Bjørn

Rafael J. Wysocki

unread,
Nov 23, 2005, 5:52:48 AM11/23/05
to linux-...@vger.kernel.org
Hi,

On Tuesday, 22 of November 2005 23:51, Pavel Machek wrote:
> > > Well, I do not think this problem will surface again. It is first
> > > failure in pretty long time. If it happens again, I'll take your
> > > patch.
> >
> > If so, could you please make it printk() a message after the timeout has
> > passed? This way the user will know what's going on at least.
>
> We do have messages there, they even tell you name of process that was
> not stopped. That's enough to debug failure quickly.

The problem is that currently the messages are only printed after the timeout,
so if you puch the timeout to infinity, they won't get printed at all.

Greetings,
Rafael

Pavel Machek

unread,
Nov 23, 2005, 7:02:35 AM11/23/05
to Bj?rn Mork, Rafael J. Wysocki, linux-...@vger.kernel.org, Dmitry Torokhov
Hi!

> >> > Well, I do not think this problem will surface again. It is first
> >> > failure in pretty long time. If it happens again, I'll take your
> >> > patch.
> >>
> >> If so, could you please make it printk() a message after the timeout has
> >> passed? This way the user will know what's going on at least.
> >
> > We do have messages there, they even tell you name of process that was
> > not stopped. That's enough to debug failure quickly.
>
> I don't think so. The example said
>
> "Strange, kseriod not stopped"
>
> This names a process that admittedly took a long time to stop, but not
> the real *cause* of the failure. There was nothing wrong with kseriod.
>
> FWIW, debugging this was way out of my league. I might have had a
> better chance if it mentioned a short, fixed timeout. I also noticed
> that it wasn't very obvious to you either at first. The first thought
> was a failing serio driver, although that admittedly might be because
> I mislead you in my attempt to pinpoint the failure.

Ok, can you suggest better wording?
Pavel
--
Thanks, Sharp!

Bjørn Mork

unread,
Nov 23, 2005, 8:18:16 AM11/23/05
to Pavel Machek, Rafael J. Wysocki, linux-...@vger.kernel.org, Dmitry Torokhov
Pavel Machek <pa...@ucw.cz> writes:

>> I don't think so. The example said
>>
>> "Strange, kseriod not stopped"
>>
>> This names a process that admittedly took a long time to stop, but n
ot
>> the real *cause* of the failure. There was nothing wrong with kseri
od.
>>
>> FWIW, debugging this was way out of my league. I might have had a
>> better chance if it mentioned a short, fixed timeout. I also notice
d
>> that it wasn't very obvious to you either at first. The first thoug
ht
>> was a failing serio driver, although that admittedly might be becaus
e
>> I mislead you in my attempt to pinpoint the failure.
>
> Ok, can you suggest better wording?

maybe something like

--- linux-2.6.15-rc1/kernel/power/process.c.orig 2005-11-18 10:15:12.00
0000000 +0100
+++ linux-2.6.15-rc1/kernel/power/process.c 2005-11-23 13:38:41.0000000
00 +0100
@@ -83,7 +83,7 @@


yield(); /* Yield is okay here */

if (todo && time_after(jiffies, start_time + TIMEOUT)) {

printk( "\n" );
- printk(KERN_ERR " stopping tasks failed (%d tasks remaining)\n", to
do );
+ printk(KERN_ERR " stopping tasks timed out after %d seconds (%d tas
ks remaining)\n", TIMEOUT/HZ, todo );
break;
}
} while(todo);


?

Or basically any text that makes it clear that we didn't really try
that hard to stop the task. We just gave up early.

I thought about adding /sys/power/timeout too, but realised that it is
way overkill for this. Ideally, the default should never need to be
changed by anynoe.

I'd really prefer Dmitry's approach with an indefinite timeout on
resume, but I also understand your wish to avoid letting this code
know whether it's suspending or resuming. No, I don't know how to
satisfy both of those requirements either. Increasing the default
TIMEOUT to a pretty-sure-to-never-be-reached value is probably an
acceptable workaround.

Bjørn

Pavel Machek

unread,
Nov 23, 2005, 8:26:30 AM11/23/05
to Bj?rn Mork, Rafael J. Wysocki, linux-...@vger.kernel.org, Dmitry Torokhov
Hi!

> > Ok, can you suggest better wording?
>
> maybe something like
>

> --- linux-2.6.15-rc1/kernel/power/process.c.orig 2005-11-18 10:15:12.000000000 +0100
> +++ linux-2.6.15-rc1/kernel/power/process.c 2005-11-23 13:38:41.000000000 +0100


> @@ -83,7 +83,7 @@
> yield(); /* Yield is okay here */
> if (todo && time_after(jiffies, start_time + TIMEOUT)) {
> printk( "\n" );

> - printk(KERN_ERR " stopping tasks failed (%d tasks remaining)\n", todo );
> + printk(KERN_ERR " stopping tasks timed out after %d seconds (%d tasks remaining)\n", TIMEOUT/HZ, todo );


> break;
> }
> } while(todo);
>
>
> ?
>
> Or basically any text that makes it clear that we didn't really try
> that hard to stop the task. We just gave up early.

Ok, this should be enough.... its more accurate than original still
not too long ;-). It will go upstream ... some day.
Pavel

Update message according to Bjorn.

---
commit 3248196034f5f0a93554b441bd41af2620afa635
tree 5bf3f8dd1ced574ca20b3c942a6b16c391c6352a
parent a57b538c084cd601a627674ebb5f09c13be42143
author <pavel@amd.(none)> Wed, 23 Nov 2005 14:23:24 +0100
committer <pavel@amd.(none)> Wed, 23 Nov 2005 14:23:24 +0100

kernel/power/process.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/kernel/power/process.c b/kernel/power/process.c
--- a/kernel/power/process.c
+++ b/kernel/power/process.c
@@ -83,7 +83,7 @@ int freeze_processes(void)


yield(); /* Yield is okay here */
if (todo && time_after(jiffies, start_time + TIMEOUT)) {
printk( "\n" );

- printk(KERN_ERR " stopping tasks failed (%d tasks remaining)\n", todo );
+ printk(KERN_ERR " stopping tasks timed out (%d tasks remaining)\n", todo );
break;
}
} while(todo);

--
Thanks, Sharp!

0 new messages