Problems with mounting filesystems from /dev/hdb (kernel 2.6.18.1)
Jano
Recently I've downloaded and compiled kernel 2.6.18.1. After installing
modules and kernel and updating Grub I rebooted my box and tried to
launch new kernel. Everything was launching nicely, but while loading
GDM the screen went black and I was unable to switch console (using
ctrl+alt+Fn). I've rebooted using single user mode and logged in as
root. What I've discovered is the fact that I cannot mount any
filesystem from /dev/hdb. All filesystems from /dev/hda work as they
ought to, but when I try to mount something from the second hard disk I
get:
# mount -t ext3 /dev/hdb1 /home
/dev/hdb1 already mounted or /home is busy
# umount /home
/home not mounted
Here you've got my /etc/fstab:
proc /proc proc defaults 0 0
/dev/hda3 / ext3 defaults,errors=remount-ro 0
1
/dev/hda1 /boot ext3 defaults 0 2
/dev/hdb1 /home ext3 defaults 0 2
/dev/hda5 /usr ext3 defaults 0 2
/dev/hda7 none swap sw 0 0
/dev/hdc /media/cdrom0 udf,iso9660 user,noauto 0 0
/dev/sda1 /media/usbdisk vfat user,auto 0 0
Currently I am using kernel 2.6.15 from Ubuntu repositories. All
filesystems work perfectly. Have you got any ideas what might be going
on?
Kind regards,
Jano
--
Mail jano at stepien.com.pl
Jabber jano at jabber.aster.pl
GG 1894343
Web stepien.com.pl
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majo...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Jiri Slaby
reboot
dmesg >2.6.18
diff -u 2.6.15 2.6.18 >post_this_to_lkml
might help us. Also attach /proc/mounts.
regards,
--
http://www.fi.muni.cz/~xslaby/ Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
Jano
> reboot
> dmesg >2.6.18
> diff -u 2.6.15 2.6.18 >post_this_to_lkml
> might help us. Also attach /proc/mounts.
>
> regards,
Thank you for your feedback. Here you've got my /proc/mount on 2.6.18.1
rootfs / rootfs rw 0 0
/dev/root / ext3 rw,data=ordered 0 0
proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
tmpfs /var/run tmpfs rw 0 0
tmpfs /var/lock tmpfs rw 0 0
/dev/root /dev/.static/dev ext3 rw,data=ordered 0 0
udev /dev tmpfs rw 0 0
devpts /dev/pts devpts rw 0 0
tmpfs /dev/shm tmpfs rw 0 0
tmpfs /var/run tmpfs rw 0 0
tmpfs /var/lock tmpfs rw 0 0
/dev/hda1 /boot ext3 rw,data=ordered 0 0
/dev/hda5 /usr ext3 rw,data=ordered 0 0
And dmesg diff, exactly as you suggested:
--- 2.6.15 2006-11-08 18:06:16.000000000 +0100
+++ 2.6.18.1 2006-11-08 22:07:53.000000000 +0100
@@ -1,317 +1,254 @@
-[17179569.184000] Linux version 2.6.15-27-386 (buildd@terranova) (gcc
version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sat Sep 16 01:51:59
UTC 2006
-[17179569.184000] BIOS-provided physical RAM map:
-[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
-[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
-[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
-[17179569.184000] BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
-[17179569.184000] BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
-[17179569.184000] BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
-[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
-[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
-[17179569.184000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
-[17179569.184000] 127MB HIGHMEM available.
-[17179569.184000] 896MB LOWMEM available.
-[17179569.184000] On node 0 totalpages: 262140
-[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
-[17179569.184000] DMA32 zone: 0 pages, LIFO batch:0
-[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
-[17179569.184000] HighMem zone: 32764 pages, LIFO batch:7
-[17179569.184000] DMI 2.3 present.
-[17179569.184000] ACPI: RSDP (v000 ASUS
) @ 0x000f5e20
-[17179569.184000] ACPI: RSDT (v001 ASUS A7V8X-X 0x42302e31 MSFT
0x31313031) @ 0x3fffc000
-[17179569.184000] ACPI: FADT (v001 ASUS A7V8X-X 0x42302e31 MSFT
0x31313031) @ 0x3fffc0b2
-[17179569.184000] ACPI: BOOT (v001 ASUS A7V8X-X 0x42302e31 MSFT
0x31313031) @ 0x3fffc030
-[17179569.184000] ACPI: MADT (v001 ASUS A7V8X-X 0x42302e31 MSFT
0x31313031) @ 0x3fffc058
-[17179569.184000] ACPI: DSDT (v001 ASUS A7V8X-X 0x00001000 MSFT
0x0100000b) @ 0x00000000
-[17179569.184000] ACPI: PM-Timer IO Port: 0xe408
-[17179569.184000] ACPI: Local APIC address 0xfee00000
-[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
-[17179569.184000] Processor #0 6:10 APIC version 16
-[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
-[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
-[17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
-[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
-[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
-[17179569.184000] ACPI: IRQ0 used by override.
-[17179569.184000] ACPI: IRQ2 used by override.
-[17179569.184000] ACPI: IRQ9 used by override.
-[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
-[17179569.184000] Using ACPI (MADT) for SMP configuration information
-[17179569.184000] Allocating PCI resources starting at 50000000 (gap:
40000000:bec00000)
-[17179569.184000] Built 1 zonelists
-[17179569.184000] Kernel command line: root=/dev/hda3 ro quiet splash
-[17179569.184000] mapped APIC to ffffd000 (fee00000)
-[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
-[17179569.184000] Initializing CPU#0
-[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
-[17179569.184000] Detected 1840.206 MHz processor.
-[17179569.184000] Using pmtmr for high-res timesource
-[17179569.184000] Console: colour VGA+ 80x25
-[17179571.060000] Dentry cache hash table entries: 131072 (order: 7,
524288 bytes)
-[17179571.060000] Inode-cache hash table entries: 65536 (order: 6,
262144 bytes)
-[17179571.100000] Memory: 1028872k/1048560k available (1976k kernel
code, 18936k reserved, 606k data, 288k init, 131056k highmem)
-[17179571.100000] Checking if this processor honours the WP bit even
in supervisor mode... Ok.
-[17179571.180000] Calibrating delay using timer specific routine..
3683.37 BogoMIPS (lpj=7366740)
-[17179571.180000] Security Framework v1.0.0 initialized
-[17179571.180000] SELinux: Disabled at boot.
-[17179571.180000] Mount-cache hash table entries: 512
-[17179571.180000] CPU: After generic identify, caps: 0383fbff
c1c3fbff 00000000 00000000 00000000 00000000 00000000
-[17179571.180000] CPU: After vendor identify, caps: 0383fbff c1c3fbff
00000000 00000000 00000000 00000000 00000000
-[17179571.180000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K
(64 bytes/line)
-[17179571.180000] CPU: L2 Cache: 512K (64 bytes/line)
-[17179571.180000] CPU: After all inits, caps: 0383fbff c1c3fbff
00000000 00000420 00000000 00000000 00000000
-[17179571.180000] mtrr: v2.0 (20020519)
-[17179571.180000] CPU: AMD Athlon(TM) XP 3000+ stepping 00
-[17179571.180000] Enabling fast FPU save and restore... done.
-[17179571.180000] Enabling unmasked SIMD FPU exception support... done.
-[17179571.180000] Checking 'hlt' instruction... OK.
-[17179571.196000] checking if image is initramfs... it is
-[17179571.776000] Freeing initrd memory: 6616k freed
-[17179571.792000] ACPI: Looking for DSDT ... not found!
-[17179571.796000] ENABLING IO-APIC IRQs
-[17179571.796000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
-[17179571.940000] NET: Registered protocol family 16
-[17179571.940000] EISA bus registered
-[17179571.940000] ACPI: bus type pci registered
-[17179571.940000] PCI: PCI BIOS revision 2.10 entry at 0xf1960, last bus=1
-[17179571.940000] PCI: Using configuration type 1
-[17179571.940000] ACPI: Subsystem revision 20051216
-[17179571.944000] ACPI: Interpreter enabled
-[17179571.944000] ACPI: Using IOAPIC for interrupt routing
-[17179571.944000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
-[17179571.944000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9
10 11 12) *0, disabled.
-[17179571.944000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12)
-[17179571.944000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9
10 11 12) *0, disabled.
-[17179571.948000] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12)
-[17179571.948000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
-[17179571.948000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10
*11 12 14 15)
-[17179571.948000] ACPI: PCI Root Bridge [PCI0] (0000:00)
-[17179571.948000] PCI: Probing PCI hardware (bus 00)
-[17179571.948000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
-[17179571.948000] PCI quirk: region e400-e47f claimed by vt8235 PM
-[17179571.948000] PCI quirk: region e800-e80f claimed by vt8235 SMB
-[17179571.952000] Boot video device is 0000:01:00.0
-[17179571.952000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
-[17179571.952000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
-[17179571.956000] Linux Plug and Play Support v0.97 (c) Adam Belay
-[17179571.956000] pnp: PnP ACPI init
-[17179571.960000] pnp: PnP ACPI: found 14 devices
-[17179571.960000] PnPBIOS: Disabled by ACPI PNP
-[17179571.960000] PCI: Using ACPI for IRQ routing
-[17179571.960000] PCI: If a device doesn't work, try "pci=routeirq".
If it helps, post a report
-[17179571.972000] pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
-[17179571.972000] pnp: 00:01: ioport range 0xe800-0xe81f could not be reserved
-[17179571.972000] pnp: 00:0d: ioport range 0x290-0x297 has been reserved
-[17179571.972000] pnp: 00:0d: ioport range 0x370-0x375 has been reserved
-[17179571.972000] PCI: Bridge: 0000:00:01.0
-[17179571.972000] IO window: d000-dfff
-[17179571.972000] MEM window: bf000000-bfffffff
-[17179571.972000] PREFETCH window: c0000000-f7ffffff
-[17179571.972000] PCI: Setting latency timer of device 0000:00:01.0 to 64
-[17179571.972000] Simple Boot Flag at 0x3a set to 0x1
-[17179571.972000] audit: initializing netlink socket (disabled)
-[17179571.972000] audit(1163006904.972:1): initialized
-[17179571.972000] highmem bounce pool size: 64 pages
-[17179571.972000] VFS: Disk quotas dquot_6.5.1
-[17179571.972000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
-[17179571.972000] Initializing Cryptographic API
-[17179571.972000] io scheduler noop registered
-[17179571.972000] io scheduler anticipatory registered
-[17179571.972000] io scheduler deadline registered
-[17179571.972000] io scheduler cfq registered
-[17179571.972000] isapnp: Scanning for PnP cards...
-[17179572.324000] isapnp: No Plug & Play device found
-[17179572.340000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
-[17179572.340000] serio: i8042 AUX port at 0x60,0x64 irq 12
-[17179572.340000] serio: i8042 KBD port at 0x60,0x64 irq 1
-[17179572.340000] Serial: 8250/16550 driver $Revision: 1.90 $ 48
ports, IRQ sharing enabled
-[17179572.340000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
-[17179572.344000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
-[17179572.344000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16
(level, low) -> IRQ 169
-[17179572.344000] ACPI: PCI interrupt for device 0000:00:0d.0 disabled
-[17179572.344000] RAMDISK driver initialized: 16 RAM disks of 65536K
size 1024 blocksize
-[17179572.344000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
-[17179572.344000] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
-[17179572.344000] mice: PS/2 mouse device common for all mice
-[17179572.344000] EISA: Probing bus 0 at eisa.0
-[17179572.344000] EISA: Detected 0 cards.
-[17179572.344000] NET: Registered protocol family 2
-[17179572.368000] input: AT Translated Set 2 keyboard as /class/input/input0
-[17179572.388000] IP route cache hash table entries: 65536 (order: 6,
262144 bytes)
-[17179572.388000] TCP established hash table entries: 262144 (order:
8, 1048576 bytes)
-[17179572.388000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
-[17179572.388000] TCP: Hash tables configured (established 262144 bind 65536)
-[17179572.388000] TCP reno registered
-[17179572.388000] TCP bic registered
-[17179572.388000] NET: Registered protocol family 1
-[17179572.388000] NET: Registered protocol family 8
-[17179572.388000] NET: Registered protocol family 20
-[17179572.392000] Using IPI Shortcut mode
-[17179572.392000] ACPI wakeup devices:
-[17179572.392000] PCI0 PCI1 USB0 USB1 USB2 SU20 SLAN
-[17179572.392000] ACPI: (supports S0 S1 S4 S5)
-[17179572.392000] Freeing unused kernel memory: 288k freed
-[17179572.440000] vga16fb: initializing
-[17179572.440000] vga16fb: mapped to 0xc00a0000
-[17179572.536000] Console: switching to colour frame buffer device 80x25
-[17179572.536000] fb0: VGA16 VGA frame buffer device
-[17179573.640000] Capability LSM initialized
-[17179574.088000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
-[17179574.088000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
-[17179574.088000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
-[17179574.088000] VP_IDE: chipset revision 6
-[17179574.088000] VP_IDE: not 100% native mode: will probe irqs later
-[17179574.088000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller
on pci0000:00:11.1
-[17179574.088000] ide0: BM-DMA at 0xa800-0xa807, BIOS settings:
hda:DMA, hdb:DMA
-[17179574.088000] ide1: BM-DMA at 0xa808-0xa80f, BIOS settings:
hdc:DMA, hdd:DMA
-[17179574.088000] Probing IDE interface ide0...
-[17179574.504000] hda: MAXTOR 6L040J2, ATA DISK drive
-[17179574.784000] hdb: SAMSUNG SP0802N, ATA DISK drive
-[17179574.840000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
-[17179574.844000] Probing IDE interface ide1...
-[17179575.712000] hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
-[17179576.496000] hdd: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive
-[17179576.556000] ide1 at 0x170-0x177,0x376 on irq 15
-[17179576.568000] hda: max request size: 128KiB
-[17179576.584000] hda: 78177792 sectors (40027 MB) w/1819KiB Cache,
CHS=65535/16/63, UDMA(33)
-[17179576.584000] hda: cache flushes supported
-[17179576.584000] hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
-[17179576.632000] hdb: max request size: 1024KiB
-[17179576.632000] hdb: 156368016 sectors (80060 MB) w/2048KiB Cache,
CHS=16383/255/63, UDMA(33)
-[17179576.632000] hdb: cache flushes supported
-[17179576.632000] hdb: hdb1 hdb2 < hdb5 hdb6 >
-[17179576.676000] hdc: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
-[17179576.676000] Uniform CD-ROM driver Revision: 3.20
-[17179576.728000] hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
-[17179577.416000] usbcore: registered new driver usbfs
-[17179577.416000] usbcore: registered new driver hub
-[17179577.416000] USB Universal Host Controller Interface driver v2.3
-[17179577.416000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21
(level, low) -> IRQ 177
-[17179577.416000] PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 1
-[17179577.416000] uhci_hcd 0000:00:10.0: UHCI Host Controller
-[17179577.416000] uhci_hcd 0000:00:10.0: new USB bus registered,
assigned bus number 1
-[17179577.416000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000b800
-[17179577.416000] hub 1-0:1.0: USB hub found
-[17179577.416000] hub 1-0:1.0: 2 ports detected
-[17179577.520000] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21
(level, low) -> IRQ 177
-[17179577.520000] PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 1
-[17179577.520000] uhci_hcd 0000:00:10.1: UHCI Host Controller
-[17179577.520000] uhci_hcd 0000:00:10.1: new USB bus registered,
assigned bus number 2
-[17179577.520000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000b400
-[17179577.520000] hub 2-0:1.0: USB hub found
-[17179577.520000] hub 2-0:1.0: 2 ports detected
-[17179577.624000] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21
(level, low) -> IRQ 177
-[17179577.624000] PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 1
-[17179577.624000] uhci_hcd 0000:00:10.2: UHCI Host Controller
-[17179577.624000] uhci_hcd 0000:00:10.2: new USB bus registered,
assigned bus number 3
-[17179577.624000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000b000
-[17179577.624000] hub 3-0:1.0: USB hub found
-[17179577.624000] hub 3-0:1.0: 2 ports detected
-[17179577.728000] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21
(level, low) -> IRQ 177
-[17179577.728000] PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 1
-[17179577.728000] ehci_hcd 0000:00:10.3: EHCI Host Controller
-[17179577.728000] ehci_hcd 0000:00:10.3: new USB bus registered,
assigned bus number 4
-[17179577.728000] ehci_hcd 0000:00:10.3: irq 177, io mem 0xbe000000
-[17179577.728000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00,
driver 10 Dec 2004
-[17179577.728000] hub 4-0:1.0: USB hub found
-[17179577.728000] hub 4-0:1.0: 6 ports detected
-[17179577.760000] usb 1-1: new full speed USB device using uhci_hcd
and address 2
-[17179578.020000] Attempting manual resume
-[17179578.076000] EXT3-fs: mounted filesystem with ordered data mode.
-[17179578.088000] kjournald starting. Commit interval 5 seconds
-[17179578.704000] usb 4-1: new high speed USB device using ehci_hcd
and address 2
-[17179579.376000] usb 2-2: new full speed USB device using uhci_hcd
and address 2
-[17179579.496000] usb 2-2: device descriptor read/64, error -71
-[17179579.720000] usb 2-2: device descriptor read/64, error -71
-[17179579.936000] usb 2-2: new full speed USB device using uhci_hcd
and address 3
-[17179580.056000] usb 2-2: device descriptor read/64, error -71
-[17179580.280000] usb 2-2: device descriptor read/64, error -71
-[17179580.496000] usb 2-2: new full speed USB device using uhci_hcd
and address 4
-[17179580.904000] usb 2-2: device not accepting address 4, error -71
-[17179581.016000] usb 2-2: new full speed USB device using uhci_hcd
and address 5
-[17179581.424000] usb 2-2: device not accepting address 5, error -71
-[17179585.188000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
-[17179585.200000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
-[17179585.356000] Linux agpgart interface v0.101 (c) Dave Jones
-[17179585.392000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
-[17179585.400000] agpgart: AGP aperture is 64M @ 0xf8000000
-[17179585.416000] irda_init()
-[17179585.416000] NET: Registered protocol family 23
-[17179585.472000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written
by Donald Becker
-[17179585.472000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23
(level, low) -> IRQ 185
-[17179585.472000] PCI: Via IRQ fixup for 0000:00:12.0, from 0 to 9
-[17179585.476000] eth0: VIA Rhine II at 0x1a400, 00:0e:a6:8a:a6:36, IRQ 185.
-[17179585.476000] eth0: MII PHY found at address 1, status 0x786d
advertising 01e1 Link 45e1.
-[17179585.792000] gameport: EMU10K1 is pci0000:00:13.1/gameport0, io
0x9800, speed 1217kHz
-[17179585.828000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18
(level, low) -> IRQ 193
-[17179585.948000] Real Time Clock Driver v1.12
-[17179586.324000] input: PC Speaker as /class/input/input1
-[17179586.440000] drivers/usb/class/usblp.c: usblp0: USB
Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
-[17179586.440000] usbcore: registered new driver usblp
-[17179586.440000] drivers/usb/class/usblp.c: v0.13: USB Printer
Device Class driver
-[17179586.592000] Floppy drive(s): fd0 is 1.44M
-[17179586.604000] parport: PnPBIOS parport detected.
-[17179586.604000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
-[17179586.608000] FDC 0 is a post-1991 82077
-[17179586.832000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
-[17179587.044000] input: ImExPS/2 Logitech Wheel Mouse as /class/input/input2
-[17179587.068000] ts: Compaq touchscreen protocol output
-[17179587.432000] lp0: using parport0 (interrupt-driven).
-[17179587.480000] fuse init (API version 7.3)
-[17179587.528000] fglrx: module license 'Proprietary. (C) 2002 - ATI
Technologies, Starnberg, GERMANY' taints kernel.
-[17179587.532000] [fglrx] Maximum main memory to use for locked dma
buffers: 929 MBytes.
-[17179587.532000] [fglrx] module loaded - fglrx 8.29.6 [Sep 19 2006] on minor 0
-[17179587.580000] Adding 1028120k swap on /dev/hda7. Priority:-1
extents:1 across:1028120k
-[17179587.688000] EXT3 FS on hda3, internal journal
-[17179587.892000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
-[17179587.892000] md: bitmap version 4.39
-[17179587.896000] NET: Registered protocol family 17
-[17179588.456000] device-mapper: 4.4.0-ioctl (2005-01-12)
initialised: dm-d...@redhat.com
-[17179589.808000] cdrom: open failed.
-[17179590.580000] kjournald starting. Commit interval 5 seconds
-[17179590.580000] EXT3 FS on hda1, internal journal
-[17179590.580000] EXT3-fs: mounted filesystem with ordered data mode.
-[17179590.584000] kjournald starting. Commit interval 5 seconds
-[17179590.584000] EXT3 FS on hdb1, internal journal
-[17179590.584000] EXT3-fs: mounted filesystem with ordered data mode.
-[17179590.592000] kjournald starting. Commit interval 5 seconds
-[17179590.592000] EXT3 FS on hda5, internal journal
-[17179590.592000] EXT3-fs: mounted filesystem with ordered data mode.
-[17179599.284000] ACPI: Power Button (FF) [PWRF]
-[17179599.284000] ACPI: Power Button (CM) [PWRB]
-[17179599.400000] ibm_acpi: ec object not found
-[17179599.436000] pcc_acpi: loading...
-[17179604.128000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16
(level, low) -> IRQ 169
-[17179604.676000] ppdev: user-space parallel port driver
-[17179606.668000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
-[17179606.668000] apm: overridden by ACPI.
-[17179606.752000] [fglrx] AGP detected, AgpState = 0x1f000a0b
(hardware caps of chipset)
-[17179606.752000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
-[17179606.752000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
-[17179606.752000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
-[17179606.752000] [fglrx] AGP enabled, AgpCommand = 0x1f000302 (selected caps)
-[17179606.768000] [fglrx] total GART = 67108864
-[17179606.768000] [fglrx] free GART = 51113984
-[17179606.768000] [fglrx] max single GART = 51113984
-[17179606.768000] [fglrx] total LFB = 126873600
-[17179606.768000] [fglrx] free LFB = 116387840
-[17179606.768000] [fglrx] max single LFB = 116387840
-[17179606.768000] [fglrx] total Inv = 134217728
-[17179606.768000] [fglrx] free Inv = 134217728
-[17179606.768000] [fglrx] max single Inv = 134217728
-[17179606.768000] [fglrx] total TIM = 0
-[17179613.756000] NET: Registered protocol family 10
-[17179613.756000] lo: Disabled Privacy Extensions
-[17179613.756000] IPv6 over IPv4 tunneling driver
-[17179624.132000] eth0: no IPv6 routers present
-[17179630.484000] ISO 9660 Extensions: Microsoft Joliet Level 3
-[17179630.696000] ISOFS: changing to secondary root
-[17179679.316000] Bluetooth: Core ver 2.8
-[17179679.316000] NET: Registered protocol family 31
-[17179679.316000] Bluetooth: HCI device and connection manager initialized
-[17179679.316000] Bluetooth: HCI socket layer initialized
-[17179679.392000] Bluetooth: L2CAP ver 2.8
-[17179679.392000] Bluetooth: L2CAP socket layer initialized
-[17179679.540000] Bluetooth: RFCOMM socket layer initialized
-[17179679.540000] Bluetooth: RFCOMM TTY layer initialized
-[17179679.540000] Bluetooth: RFCOMM ver 1.7
+Linux version 2.6.18.1 (root@jano-desktop) (gcc version 4.0.3 (Ubuntu
4.0.3-1ubuntu5)) #1 Mon Nov 6 16:14:01 CET 2006
+BIOS-provided physical RAM map:
+ BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
+ BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
+ BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
+ BIOS-e820: 0000000000100000 - 000000003fffc000 (usable)
+ BIOS-e820: 000000003fffc000 - 000000003ffff000 (ACPI data)
+ BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
+ BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
+ BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
+ BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
+Warning only 896MB will be used.
+Use a HIGHMEM enabled kernel.
+896MB LOWMEM available.
+On node 0 totalpages: 229376
+ DMA zone: 4096 pages, LIFO batch:0
+ Normal zone: 225280 pages, LIFO batch:31
+DMI 2.3 present.
+ACPI: RSDP (v000 ASUS ) @ 0x000f5e20
+ACPI: RSDT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x3fffc000
+ACPI: FADT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x3fffc0b2
+ACPI: BOOT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x3fffc030
+ACPI: MADT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x3fffc058
+ACPI: DSDT (v001 ASUS A7V8X-X 0x00001000 MSFT 0x0100000b) @ 0x00000000
+ACPI: PM-Timer IO Port: 0xe408
+ACPI: Local APIC address 0xfee00000
+ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
+Processor #0 6:10 APIC version 16
+ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
+ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
+IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
+ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
+ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
+ACPI: IRQ0 used by override.
+ACPI: IRQ2 used by override.
+ACPI: IRQ9 used by override.
+Enabling APIC mode: Flat. Using 1 I/O APICs
+Using ACPI (MADT) for SMP configuration information
+Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
+Detected 1839.975 MHz processor.
+Built 1 zonelists. Total pages: 229376
+Kernel command line: root=/dev/hda3 ro single
+mapped APIC to ffffd000 (fee00000)
+mapped IOAPIC to ffffc000 (fec00000)
+Enabling fast FPU save and restore... done.
+Enabling unmasked SIMD FPU exception support... done.
+Initializing CPU#0
+PID hash table entries: 4096 (order: 12, 16384 bytes)
+Console: colour VGA+ 80x25
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 906300k/917504k available (1813k kernel code, 10728k
reserved, 571k data, 172k init, 0k highmem)
+Checking if this processor honours the WP bit even in supervisor mode... Ok.
+Calibrating delay using timer specific routine.. 3682.73 BogoMIPS (lpj=7365468)
+Mount-cache hash table entries: 512
+CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000
00000000 00000000 00000000 00000000
+CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
00000000 00000000 00000000
+CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
+CPU: L2 Cache: 512K (64 bytes/line)
+CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420
00000000 00000000 00000000
+Intel machine check architecture supported.
+Intel machine check reporting enabled on CPU#0.
+Compat vDSO mapped to ffffe000.
+CPU: AMD Athlon(TM) XP 3000+ stepping 00
+Checking 'hlt' instruction... OK.
+ACPI: Core revision 20060707
+ENABLING IO-APIC IRQs
+..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
+NET: Registered protocol family 16
+ACPI: bus type pci registered
+PCI: PCI BIOS revision 2.10 entry at 0xf1960, last bus=1
+PCI: Using configuration type 1
+Setting up standard PCI resources
+ACPI: Interpreter enabled
+ACPI: Using IOAPIC for interrupt routing
+ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
+ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
+ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12)
+ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
+ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12)
+ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
+ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
+ACPI: PCI Root Bridge [PCI0] (0000:00)
+PCI: Probing PCI hardware (bus 00)
+ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
+PCI quirk: region e400-e47f claimed by vt8235 PM
+PCI quirk: region e800-e80f claimed by vt8235 SMB
+Boot video device is 0000:01:00.0
+ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
+ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
+PCI: Using ACPI for IRQ routing
+PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
+PCI: Bridge: 0000:00:01.0
+ IO window: d000-dfff
+ MEM window: bf000000-bfffffff
+ PREFETCH window: c0000000-f7ffffff
+PCI: Setting latency timer of device 0000:00:01.0 to 64
+NET: Registered protocol family 2
+IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
+TCP established hash table entries: 131072 (order: 7, 524288 bytes)
+TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
+TCP: Hash tables configured (established 131072 bind 65536)
+TCP reno registered
+Simple Boot Flag at 0x3a set to 0x1
+VFS: Disk quotas dquot_6.5.1
+Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
+Initializing Cryptographic API
+io scheduler noop registered
+io scheduler anticipatory registered (default)
+io scheduler deadline registered
+io scheduler cfq registered
+ACPI: Power Button (FF) [PWRF]
+ACPI: Power Button (CM) [PWRB]
+Floppy drive(s): fd0 is 1.44M
+FDC 0 is a post-1991 82077
+via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
+ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 16
+eth0: VIA Rhine II at 0xbd800000, 00:0e:a6:8a:a6:36, IRQ 16.
+eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
+Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
+ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
+Probing IDE interface ide0...
+hda: MAXTOR 6L040J2, ATA DISK drive
+hdb: SAMSUNG SP0802N, ATA DISK drive
+Probing IDE interface ide1...
+hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
+hdd: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive
+ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
+ide1 at 0x170-0x177,0x376 on irq 15
+hda: max request size: 128KiB
+hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63
+hda: cache flushes supported
+ hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
+hdb: max request size: 512KiB
+hdb: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63
+hdb: cache flushes supported
+ hdb: hdb1 hdb2 < hdb5 hdb6 >
+serio: i8042 AUX port at 0x60,0x64 irq 12
+serio: i8042 KBD port at 0x60,0x64 irq 1
+mice: PS/2 mouse device common for all mice
+IPv4 over IPv4 tunneling driver
+TCP bic registered
+Using IPI Shortcut mode
+ACPI: (supports S0 S1 S4 S5)
+Time: tsc clocksource has been installed.
+input: AT Translated Set 2 keyboard as /class/input/input0
+kjournald starting. Commit interval 5 seconds
+EXT3-fs: mounted filesystem with ordered data mode.
+VFS: Mounted root (ext3 filesystem) readonly.
+Freeing unused kernel memory: 172k freed
+input: ImExPS/2 Logitech Wheel Mouse as /class/input/input1
+NET: Registered protocol family 1
+hdc: ATAPI 52X DVD-ROM drive, 256kB Cache
+Uniform CD-ROM driver Revision: 3.20
+eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
+Linux agpgart interface v0.101 (c) Dave Jones
+agpgart: Detected VIA KT400/KT400A/KT600 chipset
+agpgart: AGP aperture is 64M @ 0xf8000000
+usbcore: registered new driver usbfs
+usbcore: registered new driver hub
+ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 17
+PCI: VIA IRQ fixup for 0000:00:10.3, from 0 to 1
+ehci_hcd 0000:00:10.3: EHCI Host Controller
+ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
+ehci_hcd 0000:00:10.3: irq 17, io mem 0xbe000000
+ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
+usb usb1: configuration #1 chosen from 1 choice
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 6 ports detected
+Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
+serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
+hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache
+ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 18
+ACPI: PCI interrupt for device 0000:00:0d.0 disabled
+usb 1-1: new high speed USB device using ehci_hcd and address 2
+usb 1-1: configuration #1 chosen from 1 choice
+ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 19
+VP_IDE: IDE controller at PCI slot 0000:00:11.1
+ACPI: Unable to derive IRQ for device 0000:00:11.1
+ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
+PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 15
+VP_IDE: chipset revision 6
+VP_IDE: not 100% native mode: will probe irqs later
+VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
+VP_IDE: port 0x01f0 already claimed by ide0
+VP_IDE: port 0x0170 already claimed by ide1
+VP_IDE: neither IDE port enabled (BIOS)
+NET: Registered protocol family 17
+drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if
0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
+usbcore: registered new driver usblp
+drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
+parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
+parport0: irq 7 detected
+lp0: using parport0 (polling).
+fuse init (API version 7.7)
+Adding 1028120k swap on /dev/hda7. Priority:-1 extents:1 across:1028120k
+EXT3 FS on hda3, internal journal
+md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
+md: bitmap version 4.39
+device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-d...@redhat.com
+device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+device-mapper: table: 253:3: linear: dm-linear: Device lookup failed
+device-mapper: ioctl: error adding target to table
+kjournald starting. Commit interval 5 seconds
+EXT3 FS on hda1, internal journal
+EXT3-fs: mounted filesystem with ordered data mode.
+kjournald starting. Commit interval 5 seconds
+EXT3 FS on hda5, internal journal
+EXT3-fs: mounted filesystem with ordered data mode.
I hope it will be helpful.
Best regards,
Jano
--
Mail jano at stepien com pl
Jabber jano at jabber aster pl
GG 1894343
Web stepien.com.pl
Jiri Slaby
Yup, but you use timestamps on the one of kernels, nevermind -- it's sed job.
> --- 2.6.15 2006-11-08 18:06:16.000000000 +0100
> +++ 2.6.18.1 2006-11-08 22:07:53.000000000 +0100
> @@ -1,317 +1,254 @@
> -[17179569.184000] Linux version 2.6.15-27-386 (buildd@terranova) (gcc
> version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sat Sep 16 01:51:59
> UTC 2006
> -[17179569.184000] BIOS-provided physical RAM map:
> -[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> -[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000
> (reserved)
> -[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000
[...]
> +EXT3-fs: mounted filesystem with ordered data mode.
> +kjournald starting. Commit interval 5 seconds
> +EXT3 FS on hda5, internal journal
> +EXT3-fs: mounted filesystem with ordered data mode.
>
> I hope it will be helpful.
Ok, we have this:
@@ -1,6 +1,5 @@
-Linux version 2.6.15-27-386 (buildd@terranova) (gcc
-ersion 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sat Sep 16 01:51:59
-TC 2006
+Linux version 2.6.18.1 (root@jano-desktop) (gcc version 4.0.3 (Ubuntu
+.0.3-1ubuntu5)) #1 Mon Nov 6 16:14:01 CET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
@@ -11,26 +10,19 @@
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
-127MB HIGHMEM available.
+Warning only 896MB will be used.
+Use a HIGHMEM enabled kernel.
This has nothing to do with your problem, but I recommend you to enable HIGHMEM.
896MB LOWMEM available.
-On node 0 totalpages: 262140
+On node 0 totalpages: 229376
DMA zone: 4096 pages, LIFO batch:0
- DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
- HighMem zone: 32764 pages, LIFO batch:7
DMI 2.3 present.
-ACPI: RSDP (v000 ASUS
- ) @ 0x000f5e20
-ACPI: RSDT (v001 ASUS A7V8X-X 0x42302e31 MSFT
-x31313031) @ 0x3fffc000
-ACPI: FADT (v001 ASUS A7V8X-X 0x42302e31 MSFT
-x31313031) @ 0x3fffc0b2
-ACPI: BOOT (v001 ASUS A7V8X-X 0x42302e31 MSFT
-x31313031) @ 0x3fffc030
-ACPI: MADT (v001 ASUS A7V8X-X 0x42302e31 MSFT
-x31313031) @ 0x3fffc058
-ACPI: DSDT (v001 ASUS A7V8X-X 0x00001000 MSFT
-x0100000b) @ 0x00000000
+ACPI: RSDP (v000 ASUS ) @ 0x000f5e20
+ACPI: RSDT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x3fffc000
+ACPI: FADT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x3fffc0b2
+ACPI: BOOT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x3fffc030
+ACPI: MADT (v001 ASUS A7V8X-X 0x42302e31 MSFT 0x31313031) @ 0x3fffc058
+ACPI: DSDT (v001 ASUS A7V8X-X 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
@@ -45,67 +37,54 @@
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
-Allocating PCI resources starting at 50000000 (gap:
-0000000:bec00000)
-Built 1 zonelists
-Kernel command line: root=/dev/hda3 ro quiet splash
+Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
+Detected 1839.975 MHz processor.
+Built 1 zonelists. Total pages: 229376
+Kernel command line: root=/dev/hda3 ro single
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
+Enabling fast FPU save and restore... done.
+Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
-PID hash table entries: 4096 (order: 12, 65536 bytes)
-Detected 1840.206 MHz processor.
-Using pmtmr for high-res timesource
+PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
-Dentry cache hash table entries: 131072 (order: 7,
-24288 bytes)
-Inode-cache hash table entries: 65536 (order: 6,
-62144 bytes)
-Memory: 1028872k/1048560k available (1976k kernel
-ode, 18936k reserved, 606k data, 288k init, 131056k highmem)
-Checking if this processor honours the WP bit even
-n supervisor mode... Ok.
-Calibrating delay using timer specific routine..
-683.37 BogoMIPS (lpj=7366740)
-Security Framework v1.0.0 initialized
-SELinux: Disabled at boot.
+Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
+Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
+Memory: 906300k/917504k available (1813k kernel code, 10728k
+eserved, 571k data, 172k init, 0k highmem)
+Checking if this processor honours the WP bit even in supervisor mode... Ok.
+Calibrating delay using timer specific routine.. 3682.73 BogoMIPS (lpj=7365468)
Mount-cache hash table entries: 512
-CPU: After generic identify, caps: 0383fbff
-1c3fbff 00000000 00000000 00000000 00000000 00000000
-CPU: After vendor identify, caps: 0383fbff c1c3fbff
-0000000 00000000 00000000 00000000 00000000
-CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K
-64 bytes/line)
+CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000
+0000000 00000000 00000000 00000000
+CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
+0000000 00000000 00000000
+CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
-CPU: After all inits, caps: 0383fbff c1c3fbff
-0000000 00000420 00000000 00000000 00000000
-mtrr: v2.0 (20020519)
+CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420
+0000000 00000000 00000000
+Intel machine check architecture supported.
+Intel machine check reporting enabled on CPU#0.
+Compat vDSO mapped to ffffe000.
CPU: AMD Athlon(TM) XP 3000+ stepping 00
-Enabling fast FPU save and restore... done.
-Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
-checking if image is initramfs... it is
-Freeing initrd memory: 6616k freed
-ACPI: Looking for DSDT ... not found!
+ACPI: Core revision 20060707
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
NET: Registered protocol family 16
-EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf1960, last bus=1
PCI: Using configuration type 1
-ACPI: Subsystem revision 20051216
+Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
-ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9
-0 11 12) *0, disabled.
+ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12)
-ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9
-0 11 12) *0, disabled.
+ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
-ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10
-11 12 14 15)
+ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
@@ -114,267 +93,168 @@
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
-Linux Plug and Play Support v0.97 (c) Adam Belay
-pnp: PnP ACPI init
-pnp: PnP ACPI: found 14 devices
-PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
-PCI: If a device doesn't work, try "pci=routeirq".
-f it helps, post a report
-pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
-pnp: 00:01: ioport range 0xe800-0xe81f could not be reserved
-pnp: 00:0d: ioport range 0x290-0x297 has been reserved
-pnp: 00:0d: ioport range 0x370-0x375 has been reserved
+PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: bf000000-bfffffff
PREFETCH window: c0000000-f7ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
+NET: Registered protocol family 2
+IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
+TCP established hash table entries: 131072 (order: 7, 524288 bytes)
+TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
+TCP: Hash tables configured (established 131072 bind 65536)
+TCP reno registered
Simple Boot Flag at 0x3a set to 0x1
-audit: initializing netlink socket (disabled)
-audit(1163006904.972:1): initialized
-highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
-io scheduler anticipatory registered
+io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
-isapnp: Scanning for PnP cards...
-isapnp: No Plug & Play device found
-PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
-x60,0x64 irq 1,12
-serio: i8042 AUX port at 0x60,0x64 irq 12
-serio: i8042 KBD port at 0x60,0x64 irq 1
-Serial: 8250/16550 driver $Revision: 1.90 $ 48
-orts, IRQ sharing enabled
-serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
-00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
-ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16
-level, low) -> IRQ 169
-ACPI: PCI interrupt for device 0000:00:0d.0 disabled
-RAMDISK driver initialized: 16 RAM disks of 65536K
-ize 1024 blocksize
+ACPI: Power Button (FF) [PWRF]
+ACPI: Power Button (CM) [PWRB]
+Floppy drive(s): fd0 is 1.44M
+FDC 0 is a post-1991 82077
+via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
+ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 16
+eth0: VIA Rhine II at 0xbd800000, 00:0e:a6:8a:a6:36, IRQ 16.
+eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
-ide: Assuming 33MHz system bus speed for PIO modes;
-verride with idebus=xx
-mice: PS/2 mouse device common for all mice
-EISA: Probing bus 0 at eisa.0
-EISA: Detected 0 cards.
-NET: Registered protocol family 2
-input: AT Translated Set 2 keyboard as /class/input/input0
-IP route cache hash table entries: 65536 (order: 6,
-62144 bytes)
-TCP established hash table entries: 262144 (order:
-, 1048576 bytes)
-TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
-TCP: Hash tables configured (established 262144 bind 65536)
-TCP reno registered
-TCP bic registered
-NET: Registered protocol family 1
-NET: Registered protocol family 8
-NET: Registered protocol family 20
-Using IPI Shortcut mode
-ACPI wakeup devices:
-PCI0 PCI1 USB0 USB1 USB2 SU20 SLAN
-ACPI: (supports S0 S1 S4 S5)
-Freeing unused kernel memory: 288k freed
-vga16fb: initializing
-vga16fb: mapped to 0xc00a0000
-Console: switching to colour frame buffer device 80x25
-fb0: VGA16 VGA frame buffer device
-Capability LSM initialized
-VP_IDE: IDE controller at PCI slot 0000:00:11.1
-ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
-PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
-VP_IDE: chipset revision 6
-VP_IDE: not 100% native mode: will probe irqs later
-VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller
-n pci0000:00:11.1
- ide0: BM-DMA at 0xa800-0xa807, BIOS settings:
-da:DMA, hdb:DMA
- ide1: BM-DMA at 0xa808-0xa80f, BIOS settings:
-dc:DMA, hdd:DMA
+ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: MAXTOR 6L040J2, ATA DISK drive
hdb: SAMSUNG SP0802N, ATA DISK drive
-ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive
+ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
-hda: 78177792 sectors (40027 MB) w/1819KiB Cache,
-HS=65535/16/63, UDMA(33)
+hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
-hdb: max request size: 1024KiB
-hdb: 156368016 sectors (80060 MB) w/2048KiB Cache,
-HS=16383/255/63, UDMA(33)
+hdb: max request size: 512KiB
+hdb: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63
hdb: cache flushes supported
hdb: hdb1 hdb2 < hdb5 hdb6 >
-hdc: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
-Uniform CD-ROM driver Revision: 3.20
-hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
-usbcore: registered new driver usbfs
-usbcore: registered new driver hub
-USB Universal Host Controller Interface driver v2.3
-ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21
-level, low) -> IRQ 177
-PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 1
-uhci_hcd 0000:00:10.0: UHCI Host Controller
-uhci_hcd 0000:00:10.0: new USB bus registered,
-ssigned bus number 1
-uhci_hcd 0000:00:10.0: irq 177, io base 0x0000b800
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 2 ports detected
-ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21
-level, low) -> IRQ 177
-PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 1
-uhci_hcd 0000:00:10.1: UHCI Host Controller
-uhci_hcd 0000:00:10.1: new USB bus registered,
-ssigned bus number 2
-uhci_hcd 0000:00:10.1: irq 177, io base 0x0000b400
-hub 2-0:1.0: USB hub found
-hub 2-0:1.0: 2 ports detected
-ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21
-level, low) -> IRQ 177
-PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 1
-uhci_hcd 0000:00:10.2: UHCI Host Controller
-uhci_hcd 0000:00:10.2: new USB bus registered,
-ssigned bus number 3
-uhci_hcd 0000:00:10.2: irq 177, io base 0x0000b000
-hub 3-0:1.0: USB hub found
-hub 3-0:1.0: 2 ports detected
-ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21
-level, low) -> IRQ 177
-PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 1
-ehci_hcd 0000:00:10.3: EHCI Host Controller
-ehci_hcd 0000:00:10.3: new USB bus registered,
-ssigned bus number 4
-ehci_hcd 0000:00:10.3: irq 177, io mem 0xbe000000
-ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00,
-river 10 Dec 2004
-hub 4-0:1.0: USB hub found
-hub 4-0:1.0: 6 ports detected
-usb 1-1: new full speed USB device using uhci_hcd
-nd address 2
-Attempting manual resume
-EXT3-fs: mounted filesystem with ordered data mode.
+serio: i8042 AUX port at 0x60,0x64 irq 12
+serio: i8042 KBD port at 0x60,0x64 irq 1
+mice: PS/2 mouse device common for all mice
+IPv4 over IPv4 tunneling driver
+TCP bic registered
+Using IPI Shortcut mode
+ACPI: (supports S0 S1 S4 S5)
+Time: tsc clocksource has been installed.
+input: AT Translated Set 2 keyboard as /class/input/input0
kjournald starting. Commit interval 5 seconds
-usb 4-1: new high speed USB device using ehci_hcd
-nd address 2
-usb 2-2: new full speed USB device using uhci_hcd
-nd address 2
-usb 2-2: device descriptor read/64, error -71
-usb 2-2: device descriptor read/64, error -71
-usb 2-2: new full speed USB device using uhci_hcd
-nd address 3
-usb 2-2: device descriptor read/64, error -71
-usb 2-2: device descriptor read/64, error -71
-usb 2-2: new full speed USB device using uhci_hcd
-nd address 4
-usb 2-2: device not accepting address 4, error -71
-usb 2-2: new full speed USB device using uhci_hcd
-nd address 5
-usb 2-2: device not accepting address 5, error -71
-pci_hotplug: PCI Hot Plug PCI Core version: 0.5
-shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
+EXT3-fs: mounted filesystem with ordered data mode.
+VFS: Mounted root (ext3 filesystem) readonly.
+Freeing unused kernel memory: 172k freed
+input: ImExPS/2 Logitech Wheel Mouse as /class/input/input1
+NET: Registered protocol family 1
+hdc: ATAPI 52X DVD-ROM drive, 256kB Cache
+Uniform CD-ROM driver Revision: 3.20
+eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: AGP aperture is 64M @ 0xf8000000
-irda_init()
-NET: Registered protocol family 23
-via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written
-y Donald Becker
-ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23
-level, low) -> IRQ 185
-PCI: Via IRQ fixup for 0000:00:12.0, from 0 to 9
-eth0: VIA Rhine II at 0x1a400, 00:0e:a6:8a:a6:36, IRQ 185.
-eth0: MII PHY found at address 1, status 0x786d
-dvertising 01e1 Link 45e1.
-gameport: EMU10K1 is pci0000:00:13.1/gameport0, io
-x9800, speed 1217kHz
-ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18
-level, low) -> IRQ 193
-Real Time Clock Driver v1.12
-input: PC Speaker as /class/input/input1
-drivers/usb/class/usblp.c: usblp0: USB
-idirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
Hmmm, this smells strange.
+NET: Registered protocol family 17
+drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if
+ alt 0 proto 2 vid 0x03F0 pid 0x2B17
usbcore: registered new driver usblp
-drivers/usb/class/usblp.c: v0.13: USB Printer
-evice Class driver
-Floppy drive(s): fd0 is 1.44M
-parport: PnPBIOS parport detected.
-parport0: PC-style at 0x378 (0x778), irq 7, dma 3
-PCSPP,TRISTATE,COMPAT,ECP,DMA]
-FDC 0 is a post-1991 82077
-eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
-input: ImExPS/2 Logitech Wheel Mouse as /class/input/input2
-ts: Compaq touchscreen protocol output
-lp0: using parport0 (interrupt-driven).
-fuse init (API version 7.3)
-fglrx: module license 'Proprietary. (C) 2002 - ATI
-echnologies, Starnberg, GERMANY' taints kernel.
-[fglrx] Maximum main memory to use for locked dma
-uffers: 929 MBytes.
-[fglrx] module loaded - fglrx 8.29.6 [Sep 19 2006] on minor 0
-Adding 1028120k swap on /dev/hda7. Priority:-1
-xtents:1 across:1028120k
+drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
+parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
+parport0: irq 7 detected
+lp0: using parport0 (polling).
+fuse init (API version 7.7)
+Adding 1028120k swap on /dev/hda7. Priority:-1 extents:1 across:1028120k
EXT3 FS on hda3, internal journal
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
-NET: Registered protocol family 17
-device-mapper: 4.4.0-ioctl (2005-01-12)
-nitialised: dm-d...@redhat.com
-cdrom: open failed.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
-EXT3 FS on hdb1, internal journal
-EXT3-fs: mounted filesystem with ordered data mode.
-kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
-ACPI: Power Button (FF) [PWRF]
-ACPI: Power Button (CM) [PWRB]
-ibm_acpi: ec object not found
-pcc_acpi: loading...
-ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16
-level, low) -> IRQ 169
-ppdev: user-space parallel port driver
-apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
-apm: overridden by ACPI.
-[fglrx] AGP detected, AgpState = 0x1f000a0b
-hardware caps of chipset)
-agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
-agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
-agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
-[fglrx] AGP enabled, AgpCommand = 0x1f000302 (selected caps)
-[fglrx] total GART = 67108864
-[fglrx] free GART = 51113984
-[fglrx] max single GART = 51113984
-[fglrx] total LFB = 126873600
-[fglrx] free LFB = 116387840
-[fglrx] max single LFB = 116387840
-[fglrx] total Inv = 134217728
-[fglrx] free Inv = 134217728
-[fglrx] max single Inv = 134217728
-[fglrx] total TIM = 0
-NET: Registered protocol family 10
-lo: Disabled Privacy Extensions
-IPv6 over IPv4 tunneling driver
-eth0: no IPv6 routers present
-ISO 9660 Extensions: Microsoft Joliet Level 3
-ISOFS: changing to secondary root
-Bluetooth: Core ver 2.8
-NET: Registered protocol family 31
-Bluetooth: HCI device and connection manager initialized
-Bluetooth: HCI socket layer initialized
-Bluetooth: L2CAP ver 2.8
-Bluetooth: L2CAP socket layer initialized
-Bluetooth: RFCOMM socket layer initialized
-Bluetooth: RFCOMM TTY layer initialized
-Bluetooth: RFCOMM ver 1.7
Sorry, it's not exact diff, but there were some line wraps.
Which ATA do you use (the prod or experimental)? Post a .config.
regards,
--
http://www.fi.muni.cz/~xslaby/ Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
Jano
>
> -127MB HIGHMEM available.
> +Warning only 896MB will be used.
> +Use a HIGHMEM enabled kernel.
>
> This has nothing to do with your problem, but I recommend you to enable HIGHMEM.
>
Done. Thanks.
>
> Sorry, it's not exact diff, but there were some line wraps.
>
As far as I'm not mistaken disabling timestamps would allow me to make
a precise diff, however I am afraid I would have to download and
recompile kernel sources from Ubuntu repos in order to ensure that the
compiled one is exactly similar to the binary one I'm currently using.
>
> Which ATA do you use (the prod or experimental)? Post a .config.
>
config has been attached. I hope it contains an answer to your
question, because otherwise I wouldn't know where to search for this
information.
Best regards,
Jano
--
Mail jano at stepien com pl
Jabber jano at jabber aster pl
GG 1894343
Web stepien.com.pl
Jano
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18.1
# Thu Nov 9 00:28:54 2006
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_TSC=y
# CONFIG_HPET_TIMER is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HIGHPTE is not set
CONFIG_MATH_EMULATION=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PHYSICAL_START=0x100000
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
# CONFIG_IP_MROUTE is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
# CONFIG_IP_VS_PROTO_TCP is not set
# CONFIG_IP_VS_PROTO_UDP is not set
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
#
# Bridge: Netfilter Configuration
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
CONFIG_LLC=y
# CONFIG_LLC2 is not set
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
# CONFIG_TOIM3232_DONGLE is not set
CONFIG_LITELINK_DONGLE=m
#
# Old SIR device drivers
#
CONFIG_IRPORT_SIR=m
#
# Old Serial dongle support
#
# CONFIG_DONGLE_OLD is not set
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
# CONFIG_VIA_FIR is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_WIRELESS_EXT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5530=m
# CONFIG_BLK_DEV_CS5535 is not set
CONFIG_BLK_DEV_HPT34X=m
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_PDC202XX_BURST=y
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
# CONFIG_SCSI_3W_9XXX is not set
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_DPT_I2O=m
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=m
# CONFIG_SCSI_SATA_AHCI is not set
CONFIG_SCSI_SATA_SVW=m
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_SATA_QSTOR is not set
CONFIG_SCSI_SATA_PROMISE=m
CONFIG_SCSI_SATA_VIA=m
CONFIG_SCSI_SATA_VITESSE=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_DEBUG=m
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_HAPPYMEAL=m
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
CONFIG_HP100=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not set
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_B44=m
CONFIG_FORCEDETH=m
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=y
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_VIA_RHINE_NAPI is not set
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_R8169=m
# CONFIG_R8169_VLAN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SK98LIN=m
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_IBMLS=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
# CONFIG_NET_WIRELESS_RTNETLINK is not set
#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=m
# CONFIG_ATMEL is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_DSCC4=m
# CONFIG_DSCC4_PCISYNC is not set
# CONFIG_DSCC4_PCI_RST is not set
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=m
# CONFIG_WANXL is not set
CONFIG_PC300=m
#
# Cyclades-PC300 MLPPP support is disabled.
#
#
# Refer to the file README.mlppp, provided by PC300 package.
#
CONFIG_FARSYNC=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
# CONFIG_FDDI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_SLIP is not set
CONFIG_NET_FC=y
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
CONFIG_ISDN=m
#
# Old ISDN4Linux
#
# CONFIG_ISDN_I4L is not set
#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_CAPI20=m
#
# CAPI hardware drivers
#
#
# Active AVM cards
#
# CONFIG_CAPI_AVM is not set
#
# Active Eicon DIVA Server cards
#
# CONFIG_CAPI_EICON is not set
#
# Telephony Support
#
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_TIPAR=m
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
# CONFIG_IPMI_SI is not set
CONFIG_IPMI_WATCHDOG=m
# CONFIG_IPMI_POWEROFF is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=m
CONFIG_RTC=m
# CONFIG_GEN_RTC is not set
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_MWAVE=m
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_PARPORT=m
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
CONFIG_SCx200_ACB=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
CONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=m
# CONFIG_FB_ARC is not set
CONFIG_FB_VGA16=m
CONFIG_FB_HGA=m
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
# CONFIG_FB_MATROX_G is not set
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MULTIHEAD=y
# CONFIG_FB_RADEON is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=m
CONFIG_FB_VOODOO1=m
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE is not set
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_AC97_BUS=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
# CONFIG_USB_ACECAD is not set
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
CONFIG_USB_MICROTEK=m
#
# USB Network Adapters
#
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_MON=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
# CONFIG_USB_SERIAL_GARMIN is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
CONFIG_USB_EMI26=m
CONFIG_USB_LCD=m
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-2"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
CONFIG_HFSPLUS_FS=m
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-2"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
# CONFIG_UNWIND_INFO is not set
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_586 is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_PLIST=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
Jiri Slaby
> On 8 Lis, 22:50, Jiri Slaby <jiri...@gmail.com> wrote:
>
> >
> > Which ATA do you use (the prod or experimental)? Post a .config.
> >
>
> question, because otherwise I wouldn't know where to search for this
> information.
Aah, sorry for the question, you use 2.6.18.1 and there is no such option yet.
Despite you have ide-generic built-in and other drivers have as a
module and you don't use initrd. If I was you, I'll try to disable
ide-generic and choose your ide chipset as built-in in
ATA/ATAPI/MFM/RLL support under Device drivers.
regards,
--
http://www.fi.muni.cz/~xslaby/ Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
Jiri Slaby
Jano: please, do not remove Cc people, when replying (i.e. reply to all)
Phillip Susi wrote:
> Ubuntu uses an initramfs, so unless he has rebuilt his kernel to get
> around that, he should still be using one.
He has his own kernel with explicitly initrd disabled by config option (i.e. not
even supported by the kernel):
http://lkml.org/lkml/2006/11/09/11
> OP, please check dmesg for any new errors after you attempt to mount
> something on hdb. Also what is the output of a mount command with no
> options?
There is a proc/mounts here:
http://lkml.org/lkml/2006/11/08/322
Jano
> Jano: please, do not remove Cc people, when replying (i.e. reply to all)
>
Oops, apologise, I'm getting used to a different mail client
interface. I'll try to do my best to follow the etiquette.
>
> Phillip Susi wrote:
> > Ubuntu uses an initramfs, so unless he has rebuilt his kernel to get
> > around that, he should still be using one.
>
I've compiled it into the kernel, but it doesn't work.
> > OP, please check dmesg for any new errors after you attempt to mount
> > something on hdb. Also what is the output of a mount command with no
> > options?
Mount haven't changed. And here's my dmesg acquired after the last
compilation. It's a diff from the previous version I posted, which can
be found here: http://lkml.org/lkml/2006/11/08/322
--- 2.6.18.1 2006-11-08 22:07:53.000000000 +0100
+++ 2.6.18.1b 2006-11-09 18:32:26.000000000 +0100
@@ -51,7 +51,7 @@
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 906300k/917504k available (1813k kernel code, 10728k
reserved, 571k data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
-Calibrating delay using timer specific routine.. 3682.73 BogoMIPS (lpj=7365468)
+Calibrating delay using timer specific routine.. 3682.72 BogoMIPS (lpj=7365441)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000
00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
00000000 00000000 00000000
@@ -150,31 +150,16 @@
Freeing unused kernel memory: 172k freed
input: ImExPS/2 Logitech Wheel Mouse as /class/input/input1
NET: Registered protocol family 1
-hdc: ATAPI 52X DVD-ROM drive, 256kB Cache
-Uniform CD-ROM driver Revision: 3.20
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: AGP aperture is 64M @ 0xf8000000
-usbcore: registered new driver usbfs
-usbcore: registered new driver hub
-ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 17
-PCI: VIA IRQ fixup for 0000:00:10.3, from 0 to 1
-ehci_hcd 0000:00:10.3: EHCI Host Controller
-ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
-ehci_hcd 0000:00:10.3: irq 17, io mem 0xbe000000
-ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
-usb usb1: configuration #1 chosen from 1 choice
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 6 ports detected
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
-hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache
-ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 18
+ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 17
ACPI: PCI interrupt for device 0000:00:0d.0 disabled
-usb 1-1: new high speed USB device using ehci_hcd and address 2
-usb 1-1: configuration #1 chosen from 1 choice
-ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 19
+hdc: ATAPI 52X DVD-ROM drive, 256kB Cache
+Uniform CD-ROM driver Revision: 3.20
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: Unable to derive IRQ for device 0000:00:11.1
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
@@ -185,10 +170,25 @@
VP_IDE: port 0x01f0 already claimed by ide0
VP_IDE: port 0x0170 already claimed by ide1
VP_IDE: neither IDE port enabled (BIOS)
+hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache
+usbcore: registered new driver usbfs
+usbcore: registered new driver hub
+ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 18
+PCI: VIA IRQ fixup for 0000:00:10.3, from 0 to 2
+ehci_hcd 0000:00:10.3: EHCI Host Controller
+ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
+ehci_hcd 0000:00:10.3: irq 18, io mem 0xbe000000
+ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
+usb usb1: configuration #1 chosen from 1 choice
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 6 ports detected
NET: Registered protocol family 17
+usb 1-1: new high speed USB device using ehci_hcd and address 2
+usb 1-1: configuration #1 chosen from 1 choice
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if
0 alt 0 proto 2 vid 0x03F0 pid 0x2B17
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
+ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 19
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
Below I've attach diff of my current .config in comparison to the one
posted over here: http://lkml.org/lkml/2006/11/09/11
--- config_old 2006-11-09 18:50:59.000000000 +0100
+++ /usr/src/linux-2.6.18.1/.config 2006-11-09 18:25:25.000000000 +0100
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18.1
-# Thu Nov 9 00:28:54 2006
+# Thu Nov 9 18:25:25 2006
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
@@ -187,6 +187,7 @@
CONFIG_PHYSICAL_START=0x100000
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+
#
# Power management options (ACPI, APM)
#
@@ -592,8 +593,11 @@
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -607,7 +611,7 @@
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
+CONFIG_BLK_DEV_HD_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
@@ -618,7 +622,7 @@
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
+CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
@@ -658,7 +662,7 @@
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_HD=y
#
# SCSI device support
@@ -758,6 +762,7 @@
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_DEBUG=m
+
#
# Multi-device support (RAID and LVM)
#
@@ -882,6 +887,7 @@
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
+
#
# Token Ring devices
#
I hope this will be helpful. Thank you for your feedback.
Best regards,
Jano
--
Mail jano at stepien com pl
Jabber jano at jabber aster pl
GG 1894343
Web stepien.com.pl
Jiri Slaby
>> Phillip Susi wrote:
>> > Ubuntu uses an initramfs, so unless he has rebuilt his kernel to get
>> > around that, he should still be using one.
>>
>
> I've compiled it into the kernel, but it doesn't work.
But I guess, you either haven't mkinitrd'ed it or you don't have an initrd line
in your loader config (I can't see any difference in dmesgs diff)?
regards,
--
http://www.fi.muni.cz/~xslaby/ Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
Phillip Susi
> Phillip: please, so not top-post
Please stop discouraging top posting. There is no reason to have to
scroll down through a screen or two of quoted message that you just
read the original of, before getting to the new subject matter.
> Jano: please, do not remove Cc people, when replying (i.e. reply to all)
>
<snip>
> There is a proc/mounts here:
> http://lkml.org/lkml/2006/11/08/322
>
I didn't ask for /proc/mounts, I asked for the output of the mount
command with no arguments, which prints the contents of /etc/mtab. I
was thinking that /etc/mtab might show the partitions as mounted even
though they are not, which could be why mount is complaining.
Jano
> Jano wrote:
> > I've compiled it into the kernel, but it doesn't work.
>
> But I guess, you either haven't mkinitrd'ed it or you don't have an initrd line
> in your loader config (I can't see any difference in dmesgs diff)?
>
It is quite possible. All I've done was:
# make all
# make modules_install
# make install
And update of /boot/grub/menu.lst. Additionally I've tried to do it using:
# make-kpkg --initrd kernel_image kernel_headers
And installing the deb package. Please correct me if I've made any mistakes.
2006/11/9, Phillip Susi <ps...@cfl.rr.com>:
> I didn't ask for /proc/mounts, I asked for the output of the mount
> command with no arguments, which prints the contents of /etc/mtab. I
> was thinking that /etc/mtab might show the partitions as mounted even
> though they are not, which could be why mount is complaining.
>
Here you are, this is output of 'mount' while in recovery mode using
kernel 2.6.18.1
$ mount
/dev/hda3 on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw)
/sys on /sys type sysfs (rw)
varrun on /var/run type tmpfs (rw)
varlock on /var/lock type tmpfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
devshm on /dev/shm type tmpfs (rw)
/dev/hda1 on /boot type ext3 (rw)
/dev/hda5 on /usr type ext3 (rw)
As you can see, no trace of /dev/hdb1.
Best regards,
Jano
--
Mail jano at stepien com pl
Jabber jano at jabber aster pl
GG 1894343
Web stepien.com.pl
Jiri Slaby
> Jiri Slaby wrote:
>> Phillip: please, so not top-post
>
> Please stop discouraging top posting. There is no reason to have to
> scroll down through a screen or two of quoted message that you just
> read the original of, before getting to the new subject matter.
Nope.
http://www.zipworld.com.au/~akpm/linux/patches/stuff/top-posting.txt
> <snip>
>> There is a proc/mounts here:
>> http://lkml.org/lkml/2006/11/08/322
>>
>
> I didn't ask for /proc/mounts, I asked for the output of the mount
> command with no arguments, which prints the contents of /etc/mtab. I
> was thinking that /etc/mtab might show the partitions as mounted even
> though they are not, which could be why mount is complaining.
Mount(8) calls mount(2) no matter what is in the /etc/mtab.
regards,
--
http://www.fi.muni.cz/~xslaby/ Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
Jiri Slaby
> 2006/11/9, Jiri Slaby <jiri...@gmail.com>:
>> Jano wrote:
>> > I've compiled it into the kernel, but it doesn't work.
>>
>> But I guess, you either haven't mkinitrd'ed it or you don't have an
>> initrd line
>> in your loader config (I can't see any difference in dmesgs diff)?
>>
>
> It is quite possible. All I've done was:
>
> # make all
> # make modules_install
> # make install
>
> And update of /boot/grub/menu.lst. Additionally I've tried to do it using:
>
> # make-kpkg --initrd kernel_image kernel_headers
>
> And installing the deb package. Please correct me if I've made any
> mistakes.
Hmm, both should be sufficient, however initrd seems to be not loaded. What does
your grub config says and could you zcat [initrd] | cpio -t (or whatever it is
packed by)?
> 2006/11/9, Phillip Susi <ps...@cfl.rr.com>:
>> I didn't ask for /proc/mounts, I asked for the output of the mount
>> command with no arguments, which prints the contents of /etc/mtab. I
>> was thinking that /etc/mtab might show the partitions as mounted even
>> though they are not, which could be why mount is complaining.
>>
>
> Here you are, this is output of 'mount' while in recovery mode using
> kernel 2.6.18.1
If you have your /etc/mtab file on ro mounted partition while in recovery mode,
it's not being updated by mount...
> $ mount
> /dev/hda3 on / type ext3 (rw,errors=remount-ro)
> proc on /proc type proc (rw)
> /sys on /sys type sysfs (rw)
> varrun on /var/run type tmpfs (rw)
> varlock on /var/lock type tmpfs (rw)
> udev on /dev type tmpfs (rw)
> devpts on /dev/pts type devpts (rw,gid=5,mode=620)
> devshm on /dev/shm type tmpfs (rw)
> /dev/hda1 on /boot type ext3 (rw)
> /dev/hda5 on /usr type ext3 (rw)
>
> As you can see, no trace of /dev/hdb1.
Is the real reason EBUSY (as it should be) -- could you strace your mount command?
I'm clueless now, sorry.
regards,
--
http://www.fi.muni.cz/~xslaby/ Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
Jano
> Phillip Susi wrote:
> >
> > Please stop discouraging top posting. There is no reason to have to
> > scroll down through a screen or two of quoted message that you just
> > read the original of, before getting to the new subject matter.
>
> Nope.
> http://www.zipworld.com.au/~akpm/linux/patches/stuff/top-posting.txt
>
I'm sorry to interrupt, but could you continue this discussion
elsewhere? We've begun to bottom-post in this topic, and let's
continue it this way. Fair enough?
>
> Mount(8) calls mount(2) no matter what is in the /etc/mtab.
>
So what should I actually post? 'cat /etc/mtab'? If so, here it is:
# cat /etc/mtab
/dev/hda3 / ext3 rw,errors=remount-ro 0 0
proc /proc proc rw 0 0
/sys /sys sysfs rw 0 0
varrun /var/run tmpfs rw 0 0
varlock /var/lock tmpfs rw 0 0
udev /dev tmpfs rw 0 0
devpts /dev/pts devpts rw,gid=5,mode=620 0 0
devshm /dev/shm tmpfs rw 0 0
/dev/hda1 /boot ext3 rw 0 0
/dev/hda5 /usr ext3 rw 0 0
Best regards,
Jano
--
Mail jano at stepien com pl
Jabber jano at jabber aster pl
GG 1894343
Jano
>
> Hmm, both should be sufficient, however initrd seems to be not loaded. What does
> your grub config says and could you zcat [initrd] | cpio -t (or whatever it is
> packed by)?
>
$ zcat /boot/initrd.img-2.6.18.1 | cpio -t
.
bin
bin/cat
bin/chroot
bin/dd
bin/false
bin/fstype
bin/gunzip
bin/gzip
bin/insmod
bin/ipconfig
bin/kinit
bin/ln
bin/minips
bin/mkdir
bin/mkfifo
bin/mount
bin/nfsmount
bin/nuke
bin/pivot_root
bin/run-init
bin/sh.shared
bin/sleep
bin/true
bin/umount
bin/uname
bin/zcat
bin/sh
bin/busybox
conf
conf/conf.d
conf/conf.d/resume
conf/arch.conf
conf/initramfs.conf
conf/modules
etc
etc/modprobe.d
etc/modprobe.d/aliases
etc/modprobe.d/alsa-base
etc/modprobe.d/apm
etc/modprobe.d/arch
etc/modprobe.d/arch/i386
etc/modprobe.d/arch-aliases
etc/modprobe.d/blacklist
etc/modprobe.d/blacklist-framebuffer
etc/modprobe.d/blacklist-modem
etc/modprobe.d/blacklist-oss
etc/modprobe.d/blacklist-scanner
etc/modprobe.d/blacklist-watchdog
etc/modprobe.d/bluez
etc/modprobe.d/ibm_acpi.modprobe
etc/modprobe.d/ipw3945
etc/modprobe.d/isapnp
etc/modprobe.d/nvidia-kernel-nkc
etc/modprobe.d/options
etc/modprobe.d/toshiba_acpi.modprobe
etc/evms.conf
etc/udev
etc/udev/udev.conf
etc/udev/rules.d
etc/udev/rules.d/00-init.rules
etc/udev/rules.d/20-names.rules
etc/udev/rules.d/65-persistent-disk.rules
etc/udev/rules.d/90-modprobe.rules
lib
lib/modules
lib/modules/2.6.18.1
lib/modules/2.6.18.1/kernel
lib/modules/2.6.18.1/kernel/drivers
lib/modules/2.6.18.1/kernel/drivers/md
lib/modules/2.6.18.1/kernel/drivers/md/md-mod.ko
lib/modules/2.6.18.1/kernel/drivers/md/raid0.ko
lib/modules/2.6.18.1/kernel/drivers/md/raid1.ko
lib/modules/2.6.18.1/kernel/drivers/md/dm-mod.ko
lib/modules/2.6.18.1/kernel/drivers/md/linear.ko
lib/modules/2.6.18.1/kernel/drivers/usb
lib/modules/2.6.18.1/kernel/drivers/usb/core
lib/modules/2.6.18.1/kernel/drivers/usb/core/usbcore.ko
lib/modules/2.6.18.1/kernel/drivers/usb/host
lib/modules/2.6.18.1/kernel/drivers/usb/host/ehci-hcd.ko
lib/modules/2.6.18.1/kernel/drivers/usb/input
lib/modules/2.6.18.1/kernel/drivers/usb/input/usbhid.ko
lib/modules/2.6.18.1/kernel/drivers/usb/storage
lib/modules/2.6.18.1/kernel/drivers/usb/storage/usb-storage.ko
lib/modules/2.6.18.1/kernel/drivers/scsi
lib/modules/2.6.18.1/kernel/drivers/scsi/scsi_mod.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/3w-xxxx.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/aacraid
lib/modules/2.6.18.1/kernel/drivers/scsi/aacraid/aacraid.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/scsi_transport_spi.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/aic7xxx
lib/modules/2.6.18.1/kernel/drivers/scsi/aic7xxx/aic79xx.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/aic7xxx/aic7xxx.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/atp870u.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/BusLogic.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/ch.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/dmx3191d.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/dpt_i2o.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/eata.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/fdomain.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/gdth.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/initio.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/ips.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/nsp32.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/osst.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/qla1280.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/libata.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/sata_promise.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/sata_svw.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/sata_via.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/sata_vsc.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/sd_mod.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/sym53c8xx_2
lib/modules/2.6.18.1/kernel/drivers/scsi/sym53c8xx_2/sym53c8xx.ko
lib/modules/2.6.18.1/kernel/drivers/scsi/tmscsim.ko
lib/modules/2.6.18.1/kernel/drivers/net
lib/modules/2.6.18.1/kernel/drivers/net/3c59x.ko
lib/modules/2.6.18.1/kernel/drivers/net/8139too.ko
lib/modules/2.6.18.1/kernel/drivers/net/8390.ko
lib/modules/2.6.18.1/kernel/drivers/net/b44.ko
lib/modules/2.6.18.1/kernel/drivers/net/dl2k.ko
lib/modules/2.6.18.1/kernel/drivers/net/e1000
lib/modules/2.6.18.1/kernel/drivers/net/e1000/e1000.ko
lib/modules/2.6.18.1/kernel/drivers/net/e100.ko
lib/modules/2.6.18.1/kernel/drivers/net/epic100.ko
lib/modules/2.6.18.1/kernel/drivers/net/fealnx.ko
lib/modules/2.6.18.1/kernel/drivers/net/forcedeth.ko
lib/modules/2.6.18.1/kernel/drivers/net/hp100.ko
lib/modules/2.6.18.1/kernel/drivers/net/natsemi.ko
lib/modules/2.6.18.1/kernel/drivers/net/ne2k-pci.ko
lib/modules/2.6.18.1/kernel/drivers/net/ns83820.ko
lib/modules/2.6.18.1/kernel/drivers/net/pcnet32.ko
lib/modules/2.6.18.1/kernel/drivers/net/r8169.ko
lib/modules/2.6.18.1/kernel/drivers/net/sis900.ko
lib/modules/2.6.18.1/kernel/drivers/net/slhc.ko
lib/modules/2.6.18.1/kernel/drivers/net/starfire.ko
lib/modules/2.6.18.1/kernel/drivers/net/sundance.ko
lib/modules/2.6.18.1/kernel/drivers/net/sunhme.ko
lib/modules/2.6.18.1/kernel/drivers/net/tg3.ko
lib/modules/2.6.18.1/kernel/drivers/net/tlan.ko
lib/modules/2.6.18.1/kernel/drivers/cdrom
lib/modules/2.6.18.1/kernel/drivers/cdrom/cdrom.ko
lib/modules/2.6.18.1/kernel/drivers/ide
lib/modules/2.6.18.1/kernel/drivers/ide/ide-cd.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci
lib/modules/2.6.18.1/kernel/drivers/ide/pci/aec62xx.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/alim15x3.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/amd74xx.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/atiixp.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/cmd64x.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/cs5530.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/cy82c693.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/generic.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/hpt34x.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/hpt366.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/ns87415.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/pdc202xx_new.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/pdc202xx_old.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/piix.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/rz1000.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/sc1200.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/serverworks.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/siimage.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/sis5513.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/slc90e66.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/triflex.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/trm290.ko
lib/modules/2.6.18.1/kernel/drivers/ide/pci/via82cxxx.ko
lib/modules/2.6.18.1/kernel/drivers/block
lib/modules/2.6.18.1/kernel/drivers/block/cpqarray.ko
lib/modules/2.6.18.1/kernel/drivers/video
lib/modules/2.6.18.1/kernel/drivers/video/cfbfillrect.ko
lib/modules/2.6.18.1/kernel/drivers/video/cfbimgblt.ko
lib/modules/2.6.18.1/kernel/drivers/video/vgastate.ko
lib/modules/2.6.18.1/kernel/drivers/video/cfbcopyarea.ko
lib/modules/2.6.18.1/kernel/drivers/video/fb.ko
lib/modules/2.6.18.1/kernel/drivers/video/vga16fb.ko
lib/modules/2.6.18.1/kernel/net
lib/modules/2.6.18.1/kernel/net/sunrpc
lib/modules/2.6.18.1/kernel/net/sunrpc/sunrpc.ko
lib/modules/2.6.18.1/kernel/net/packet
lib/modules/2.6.18.1/kernel/net/packet/af_packet.ko
lib/modules/2.6.18.1/kernel/net/unix
lib/modules/2.6.18.1/kernel/net/unix/unix.ko
lib/modules/2.6.18.1/kernel/fs
lib/modules/2.6.18.1/kernel/fs/lockd
lib/modules/2.6.18.1/kernel/fs/lockd/lockd.ko
lib/modules/2.6.18.1/kernel/fs/nfs
lib/modules/2.6.18.1/kernel/fs/nfs/nfs.ko
lib/klibc-t2jM36h7OcxUNTDzncfER2p7kd4.so
lib/libc.so.6
lib/ld-linux.so.2
lib/libevms-2.5.so.0
lib/libpthread.so.0
lib/libdl.so.2
lib/evms
lib/evms/2.5.4
lib/evms/2.5.4/bbr-1.1.14.so
lib/evms/2.5.4/bbr_seg-1.1.12.so
lib/evms/2.5.4/bsd-1.0.8.so
lib/evms/2.5.4/disk-1.2.12.so
lib/evms/2.5.4/dos-1.1.15.so
lib/evms/2.5.4/drivelink-3.0.6.so
lib/evms/2.5.4/gpt-1.1.11.so
lib/evms/2.5.4/lvm2-1.0.4.so
lib/evms/2.5.4/mac-1.0.8.so
lib/evms/2.5.4/md-1.1.19.so
lib/evms/2.5.4/multipath-1.0.4.so
lib/libuuid.so.1
lib/libselinux.so.1
lib/libsepol.so.1
lib/udev
lib/udev/dvb_device_name
lib/udev/usb_device_name
lib/udev/ata_id
lib/udev/edd_id
lib/udev/usb_id
lib/udev/vol_id
lib/udev/dasd_id
lib/udev/scsi_id
lib/udev/path_id
lib/udev/pnp_modules
lib/udev/ide_media
lib/udev/vio_type
lib/libdevmapper.so.1.02
lib/libreadline.so.5
lib/libncurses.so.5
modules
sbin
sbin/modprobe
sbin/depmod
sbin/rmmod
sbin/evms_activate
sbin/udevd
sbin/udevplug
sbin/usplash
sbin/usplash_write
sbin/mdadm
sbin/mdrun
sbin/vgchange
scripts
scripts/casper-premount
scripts/casper-premount/udev
scripts/functions
scripts/init-bottom
scripts/init-bottom/udev
scripts/init-premount
scripts/init-premount/thermal
scripts/init-premount/udev
scripts/init-top
scripts/init-top/framebuffer
scripts/init-top/usplash
scripts/local
scripts/local-bottom
scripts/local-premount
scripts/local-premount/suspend
scripts/local-top
scripts/local-top/evms
scripts/local-top/lvm
scripts/local-top/md
scripts/local-top/udev
scripts/nfs
scripts/nfs-bottom
scripts/nfs-premount
scripts/nfs-top
scripts/nfs-top/udev
init
usr
usr/lib
usr/lib/usplash
usr/lib/usplash/usplash-artwork.so
>
> Is the real reason EBUSY (as it should be) -- could you strace your mount command?
>
"EBUSY", "strace"? Excuse me? Could you paraphrase it somehow (sorry
if it's a newbie-like question)? If you mean that /home is busy, then
no, it is not.
# lsof | grep home
doesn't output a single line.
>
> I'm clueless now, sorry.
>
Do not lose your faith - it can be done ;).
Best regards,
Jano
--
Mail jano at stepien com pl
Jabber jano at jabber aster pl
GG 1894343
Jiri Slaby
>> mount command?
>>
>
> "EBUSY", "strace"? Excuse me? Could you paraphrase it somehow
See an example below.
> (sorry if it's a newbie-like question)?
In such cases google is very helpful ;).
> If you mean that /home is busy, then
> no, it is not.
>
> # lsof | grep home
>
> doesn't output a single line.
No, I meant strace(1):
strace mount /dev/hdbX /home
regards,
--
http://www.fi.muni.cz/~xslaby/ Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
Jiri Slaby
[...]
> @@ -607,7 +611,7 @@
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_IDE_SATA is not set
> -# CONFIG_BLK_DEV_HD_IDE is not set
> +CONFIG_BLK_DEV_HD_IDE=y
This was not definitely a good choice. Disable it.
│ Symbol: BLK_DEV_HD_IDE [=n] │
│ Prompt: Use old disk-only driver on primary interface │
│ Defined at drivers/ide/Kconfig:118 │
│ Depends on: IDE && BLK_DEV_IDE && (X86 || SH_MPC1211) │
│ Location: │
│ -> Device Drivers │
│ -> ATA/ATAPI/MFM/RLL support │
│ -> ATA/ATAPI/MFM/RLL support (IDE [=y]) │
│ -> Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support (BLK_D │
> CONFIG_BLK_DEV_IDEDISK=y
> # CONFIG_IDEDISK_MULTI_MODE is not set
> CONFIG_BLK_DEV_IDECD=m
> @@ -618,7 +622,7 @@
> #
> # IDE chipset support/bugfixes
> #
> -CONFIG_IDE_GENERIC=y
> +CONFIG_IDE_GENERIC=m
> # CONFIG_BLK_DEV_CMD640 is not set
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> @@ -658,7 +662,7 @@
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_IDEDMA_AUTO=y
> -# CONFIG_BLK_DEV_HD is not set
> +CONFIG_BLK_DEV_HD=y
And try to turn "VIA82CXXX chipset support" to <*>, i.e. built-in (somebody
holds regions of ide0 and ide1, let's try via driver to probe first).
regards,
--
http://www.fi.muni.cz/~xslaby/ Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
Oliver Brakmann
they keep the CC line, the To: line just gets turned into the
newsgroups: line, so I almost never see all recipients :-/ ]
Hi,
On Wed, 2006-11-08 22:09, Jano wrote...
> +Adding 1028120k swap on /dev/hda7. Priority:-1 extents:1 across:1028120k
> +EXT3 FS on hda3, internal journal
This is S20checkroot.sh running...
> +md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> +md: bitmap version 4.39
This is S25mdadm-raid.
> +device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-d...@redhat.com
> +device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
> +device-mapper: ioctl: error adding target to table
At this point, it looks like something already grabbed hold of /dev/hdb.
Both evms and lvm get started here, right after S25mdadm-raid.
This is just a hunch, but you might try disabling either of the two.
Also, it might help if you'd post the output of 'fdisk -l /dev/hdb' to
see what's on it. The output of 'pvs' might help, too.
I have no clue why this error only shows up with the vanilla kernel and
not with the Ubuntu one, though :-/
Bye,
Oliver
--
It's practically impossible to look at a /\ #198843 @ http://counter.li.org
penguin and feel angry. -- Joe Moore \/
NP: Apoptygma Berzerk - Until the end of the world
Jiri Slaby
>>
>
>
>>
>> No, I meant strace(1):
>> strace mount /dev/hdbX /home
>>
>
> # strace mount /home > file2
yeah. Either redirect stderr by 2> file1 (this will contain mount errors too) or
use strace -o file1
[snip]
>> And try to turn "VIA82CXXX chipset support" to <*>, i.e. built-in
>> (somebody
>> holds regions of ide0 and ide1, let's try via driver to probe first).
>>
>
> Also done. Haven't changed anything.
>
> Hope that strace output will be helpful. As far as I'll be able to
> save the results. Any suggestions?
When you boot with init=/bin/bash not to allow system to start scripts, does it
work? (add init=/bin/bash kernel parameter)
Jody Belka
> > +device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-d...@redhat.com
> > +device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
> > +device-mapper: ioctl: error adding target to table
>
> At this point, it looks like something already grabbed hold of /dev/hdb.
> Both evms and lvm get started here, right after S25mdadm-raid.
>
> This is just a hunch, but you might try disabling either of the two.
> Also, it might help if you'd post the output of 'fdisk -l /dev/hdb' to
> see what's on it. The output of 'pvs' might help, too.
>
> I have no clue why this error only shows up with the vanilla kernel and
> not with the Ubuntu one, though :-/
That i think i can help out with. The last time i took a look at the patches
ubuntu applies, one of them was the bd-claim patch. This removes the
functionality preventing multiple "owners" of a block device, thereby allowing
the use of both traditional partitions and device-mapper on the same disk,
something specifically not permitted in the vanilla kernel.
J
--
Jody Belka
knew (at) pimb (dot) org