[hylafax-users] Hylafax, Iaxmodem & Callerid
Bastian Marmetschke
Hi,
we are running Hylafax 6.X with Iaxmodem. Is there any way to specify the outgoing callerid/cidnumber on the fax for each user?
Thanks
Bastian
Bastian Marmetschke
Hi Lee,
thanks again ! I just updated - I noticed that hylafax+ supports ldap without pam. I used to connect hfax with PAM Support to our Active Directory Server. After the update - it doesnt seem to work anymore. What do I need to setup, to connect it again ?
Thanks
Bastian
-----Ursprüngliche Nachricht-----
An:Bastian Marmetschke <bastian.m...@nethinks.com>;
Von:Lee Howard <fax...@howardsilvan.com>
Gesendet:Mi 31.08.2011 07:50
Betreff:Re: AW: [hylafax-users] Hylafax, Iaxmodem & Callerid
Bastian Marmetschke wrote:
>
> I will try to "downgrade" to hylafax+ then.
>
HylaFAX+ 5.5.0 will in reality be an upgrade to any hylafax.org release
you're using.
> But a dumb question, where do I have to set the ModemSetOriginCmd ?
>
In the modem config files.
> What about the config of iaxmodem ? Do I need to change the ttyIAX
> devices also ?
>
No. Just add it to the modem config file. But I recommend that you
re-run faxaddmodem and then review the config file afterwards... then
making sure that ModemSetOriginCmd is as you wish.
Thanks,
Lee.
Lee Howard
>
> thanks again ! I just updated - I noticed that hylafax+ supports ldap
> without pam. I used to connect hfax with PAM Support to our Active
> Directory Server. After the update - it doesnt seem to work anymore.
> What do I need to setup, to connect it again ?
>
I believe that the PAM functions between HylaFAX+ and hylafax.org
releases are identical (or at least close-enough to consider them
identical). The extra LDAP functionality in HylaFAX+ shouldn't be
interfering. So just retrace your previous PAM configuration as your
upgrade approach may have undone your previous PAM configuration work.
Thanks,
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-us...@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sa...@ifax.com.*
Bastian Marmetschke
Hi,
okay - the hylafax 5.5.0 was compiled without PAM support. I Just fixed that out - it works fine now.
Is it possible to set the " ModemSetOriginCmd " by user ? Means User X is having CallerID: "12345" ? I mean, how does it work to set the " ModemSetOriginCmd " anyway ? Do I need to have a client that supports that attribut ? WHFC as client wouldnt work, would it ?
Thanks again,
Bastian
-----Ursprüngliche Nachricht-----
An:Bastian Marmetschke <bastian.m...@nethinks.com>;
CC:Hylafax Mailling List <hylafa...@hylafax.org>;
Von:Lee Howard <fax...@howardsilvan.com>
Gesendet:Mi 31.08.2011 09:44
Betreff:Re: [hylafax-users] AW: Hylafax, Iaxmodem & Callerid
Lee Howard
>
> Is it possible to set the " ModemSetOriginCmd " by user ? Means User X
> is having CallerID: "12345" ?
>
You can do this with JobControl.
> I mean, how does it work to set the " ModemSetOriginCmd " anyway ?
>
The client submits the data in the job and then the server passes the
data to the modem.
> Do I need to have a client that supports that attribut ?
>
Not if you use JobControl. But it sure would be a lot easier if the
client could.
> WHFC as client wouldnt work, would it ?
>
I don't think WHFC supports these features. So if you're using WHFC
you'll need to use JobControl or something.
Bastian Marmetschke
Hi,
me again. I just setup the hylafax+ 5.5.0 and uncommented ModemSetOriginCmd: AT+VSID="%s","%d".
If I try to use sendfax like "sendfax -n -u 06912345 -d 0302222111 /etc/hosts"
I see that the "faxnumber" attribut is set to 06912345 (/var/spool/hylafax/doneq) - but on the received fax - there is no callerid.
Like I said, i am using IAXmodem - do I need to configure something else also ?
My hylafax modem config looks like:
CountryCode: 49
AreaCode: 69
FAXNumber: +49.69.54321.12
LongDistancePrefix: 0049
InternationalPrefix: 011
DialStringRules: etc/dialrules
ServerTracing: 0xFFF
SessionTracing: 0xFFF
RecvFileMode: 0600
LogFileMode: 0600
DeviceMode: 0600
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "Company Name"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 200
ModemType: Class1
ModemResetCmds: "ATH1\nAT+VCID=1" # enables CallID display
ModemReadyCmds: ATH0
ModemSetOriginCmd: AT+VSID="%s","%d"
Class1AdaptRecvCmd: AT+FAR=1
Class1TMConnectDelay: 400 # counteract quick CONNECT response
Class1RMQueryCmd: "!24,48,72,96" # enable this to disable V.17
CallIDPattern: "NMBR="
CallIDPattern: "NAME="
CallIDPattern: "ANID="
CallIDPattern: "NDID="
Thanks
Von:Lee Howard <fax...@howardsilvan.com>
Lee Howard
>
> me again. I just setup the hylafax+ 5.5.0 and
> uncommented ModemSetOriginCmd: AT+VSID="%s","%d".
>
>
>
> If I try to use sendfax like "sendfax -n -u 06912345 -d 0302222111
> /etc/hosts"
>
>
>
> I see that the "faxnumber" attribut is set to 06912345
> (/var/spool/hylafax/doneq) - but on the received fax - there is no
> callerid.
>
>
>
> Like I said, i am using IAXmodem - do I need to configure something
> else also ?
>
Caller-ID is there, then does Caller-ID service exist on the receiver?
Bastian Marmetschke
Hi,
thanks for your reply. I dont want to change the outgoing callerid on asterisk - I would like to change the actually "cidnumber" on the fax-paper.
Thanks
Bastian
-----Ursprüngliche Nachricht-----
An:Bastian Marmetschke <bastian.m...@nethinks.com>;
Gesendet:Mo 19.09.2011 08:36