[hylafax-users] Hylafax error: 530 login incorrect

[ja raju]

Hi! I'm getting this "HylaFAX Error: 530 Login incorrect"  when i try to send fax using WinPrintHylafax or any other Hylafax client.(so far i tested it with WinPrintHylaFax and HylaFront)

I'm using Mandrake10.1 with hylafax 4.2.0 for the fax server and on the WinXP clients i'm using WinPrintHylafax 1.2.0. 
 
I configured the same login credentials at the HFAX1 port as i have in the fax server. 

Did anyone else have this problem before? how was it solved? 
 
Thanks.

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[Michael Stowe]

This appears to be a fairly common problem, and is almost always a result
of misinterpreting how the hosts.hfaxd is going to be interpreted by
hylafax.

For comparison, and possible enlightenment, here's my hosts.hfaxd:
localhost
127.0.0.1
10.168.0.[0-9]+

Note that WinPrintHylaFAX still requires a login name, even though a
password isn't necessary from localhost or from the 10.168.0.x network in
the above example.

> Hi! I'm getting this "HylaFAX Error: 530 Login incorrect" when i try
> to send fax using WinPrintHylafax or any other Hylafax client.(so far
> i tested it with WinPrintHylaFax and HylaFront)
>
> I'm using Mandrake10.1 with hylafax 4.2.0 for the fax server and on the
> WinXP clients i'm using WinPrintHylafax 1.2.0.
>
> I configured the same login credentials at the HFAX1 port as i have in
> the fax server.
>
> Did anyone else have this problem before? how was it solved?
>
> Thanks.

____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-us...@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sa...@ifax.com.*

[ja raju]

Hi Michael, thanks for your reply.

Since i'm not too familiar how to configure hosts.hfaxd, can anyone help see if mine is correct?

Here's my hosts.hfaxd:
localhost
127.0.0.1
10.7

My fax server is using 10.7.2.14/255.255.0.0 and the clients are using 10.7.101x/255.255.0.0. They are all in the same subnet.

Is my hosts.hfaxd correct?

Thanks.

[Michael Stowe]

The third line below should work:

localhost
127.0.0.1
10.7.101.[0-9]+
10.7.[0-9]+

I'm not sure about the fourth one, it's either that or 10.7.[0-9]+.[0-9]+

> Hi Michael, thanks for your reply.
>
> Since i'm not too familiar how to configure hosts.hfaxd, can anyone help
> see if mine is correct?
>
> Here's my hosts.hfaxd:
> localhost
> 127.0.0.1
> 10.7
>
> My fax server is using 10.7.2.14/255.255.0.0 and the clients are using

> 10.7.101.x/255.255.0.0. They are all in the same subnet.

[ja raju]

Hi Michael,

I tried your suggestion but it still doesn't work. I still keep getting Error 530 login incorrect whenever i try to send a fax. Can you explain to me why you added the [0-9]+ in the IP address? Does anyone else have any experience setting up hylafax in a Class B environment?

>> i tested it with WinPrintHyl aFax and HylaFront)
>>
>> I'm using Mandrake10.1 with hylafax 42.0 for the fax server and on the

>> WinXP clients i'm using WinPrintHylafax 1.2.0.
>>
>> I configured the same login credentials at the HFAX1 port as i have in
>> the fax server.
>>
>> Did anyone else have this problem before? how was it solved?
>>
>> Thanks.
>
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-us...@hylafax.org <
> /dev/null
> *To learn about commercial HylaFAX(tm) support, mail sa...@ifax.com.*
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com


____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-us...@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sa...@ifax.com.*

[Max Mothwurf]

Am Montag, 6. Februar 2006 01:37 schrieb ja raju:
> Here's my hosts.hfaxd:
> localhost
> 127.0.0.1
> 10.7

Should this not look like
10.7.0.0./16
??

Mx

[ja raju]

Hi Max,

I tried that too, still no luck. It's still giving me error 530. Anything else i could try?

Thanks.

---

Relax. Yahoo! Mail virus scanning helps detect nasty viruses!

[Max Mothwurf]

Am Mittwoch, 8. Februar 2006 07:40 schrieb ja raju:

> I tried that too, still no luck. It's still giving me error 530. Anything
> else i could try?

Try again without the final period - was a typo from my side. Sorry

> Should this not look like
> 10.7.0.0./16

10.7.0.0/16

[Aidan Van Dyk]

I don't think HylaFAX has ever supported CIDR style clients in
hosts.hfaxd.

Have you looked closely at the host.hfaxd man page?

Each newline-terminated entry is a set of colon (:) separated
fields, all but the first of which are optional. Trail- ing
null fields and their separators may be omitted. The most
general form is:

client:uid:passwd:adminwd

client is a regular expression to be matched against a string
``user@host'' that is formed from the user string passed to hfaxd
with the USER command and the official host name or the DARPA
Internet address, specified in ``dot notation''. If client
does not contain an ``@'' then, for backwards compatibility, it
is treated as a host for which any user may have access; i.e. it
is automatically converted to the regular expression
``^.*@client$''.

* Max Mothwurf <hylaf...@gmx.net> [060208 05:55]:

> Am Mittwoch, 8. Februar 2006 07:40 schrieb ja raju:
>
> > I tried that too, still no luck. It's still giving me error 530. Anything
> > else i could try?
>
> Try again without the final period - was a typo from my side. Sorry
>
> > Should this not look like
> > 10.7.0.0./16
>
> 10.7.0.0/16

--
Aidan Van Dyk ai...@ifax.com
Senior Software Developer +1 215 438-4638 x8103
iFAX Solutions, Inc. http://www.ifax.com/

[ja raju]

Yes i know. I typed it in as 10.7.0.0/16 :)

I even tried to change my fax server IP to 10.7.101.X to match with the clients IP range but still it wont work. I'm still getting error 530.

Could it be anything other than hosts.hfaxd thats causing the error?

Thanks.


Max Mothwurf <hylaf...@gmx.net> wrote:

Am Mittwoch, 8. Februar 2006 07:40 schrieb ja raju:

> I tried that too, still no luck. It's still giving me error 530. Anything
> else i could try?

Try again without the final period - was a typo from my side. Sorry

> Should this not look like
> 10.7.0.0./16

10.7.0.0/16

____________________ HylaFAX(tm) Users Mailing List _______________________

To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2cgi

On UNIX: mail -s unsubscribe hylafax-us...@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sa...@ifax.com.*

[Michael Stowe]

It's possible, but since you continue to use the wrong syntax, it's a
pretty safe bet that hosts.hfaxd is the source of the error.

10.7.0.0/16 should NOT work

10.7.[0-9]+.[0-9]+ is the correct syntax; see man hosts.hfaxd for more
details.

> Yes i know. I typed it in as 10.7.0.0/16 :)
>
> I even tried to change my fax server IP to 10.7.101.X to match with the
> clients IP range but still it wont work. I'm still getting error 530.
>
> Could it be anything other than hosts.hfaxd thats causing the error?
>
> Thanks.
>
>
> Max Mothwurf <hylaf...@gmx.net> wrote: Am Mittwoch, 8. Februar 2006
> 07:40 schrieb ja raju:
>
>> I tried that too, still no luck. It's still giving me error 530.
>> Anything
>> else i could try?
>
> Try again without the final period - was a typo from my side. Sorry
>
>> Should this not look like
>> 10.7.0.0./16
>
> 10.7.0.0/16
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> To subscribe/unsubscribe, click

> http://lists.hylafax.org/cgi-bin/lsg2.cgi

> On UNIX: mail -s unsubscribe hylafax-us...@hylafax.org <
> /dev/null
> *To learn about commercial HylaFAX(tm) support, mail sa...@ifax.com.*
>
>
>
>

> ---------------------------------

> Relax. Yahoo! Mail virus scanning helps detect nasty viruses!

____________________ HylaFAX(tm) Users Mailing List _______________________

To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi

[ja raju]

Hi Michael,

Sorry for the late reply.
I've changed my hosts.hfaxd as shown below:

localhost
127.0.0.1

10.7.[0-9]+.[0-9]+

I'm still getting error 530 login incorrect :(

Please help!



Michael Stowe <mst...@baddomain.com> wrote:

It's possible, but since you continue to use the wrong syntax, it's a
pretty safe bet that hosts.hfaxd is the source of the error.

10.7.0.0/16 should NOT work

10.7.[0-9]+.[0-9]+ is the correct syntax; see man hosts.hfaxd for more
details.

> Yes i know. I typed it in as 10.7.0.0/16 :)
>
> I even tried to change my fax server IP to 10.7.101.X to match with the
> clients IP range but still it wont work. I'm still getting error 530.
>
> Could it be anything other than hosts.hfaxd thats causing the error?
>

> Thanks.
>
>
> Max Mothwurf wrote: Am Mittwoch, 8. Februar 2006

> 07:40 schrieb ja raju:
>
>> I tried that too, still no luck. It's still giving me error 530

>> Anything
>> else i could try?
>
> Try again without the final period - was a typo from my side. Sorry
>
>> Should this not look like
>> 10.7.0.0./16
>
> 10.7.0.0/16
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-us...@hylafax.org <
> /dev/null
> *To learn about commercial HylaFAX(tm) support, mail sa...@ifax.com.*
>
>
>
>
> ---------------------------------
> Relax. Yahoo! Mail virus scanning helps detect nasty viruses!

_____________ _______ HylaFAX(tm) Users Mailing List _______________________

To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-us...@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sa...@ifax.com.*

---

What are the most popular cars? Find out at Yahoo! Autos

[Holger Bruenjes]

Hello

Am 2006-02-15 12:16, schrieb ja raju:
> Hi Michael,

>
> I'm still getting error 530 login incorrect :(
>
> Please help!

What are the rights from hosts.hfaxd chmod 600 must it

Holger

[ja raju]

Hi!

The rights on hosts.hfaxd was 644. I've changed it to 600 now.

It works!

But now i have another problem....
I'm getting this message when i try to send faxes:

Your job to 20937719 was not sent because:
    Unknown problem (check modem power)

The job will be retried at 13:58.

    ---- Transcript of session follows ----

Feb 24 13:50:09.95: [16382]: SESSION BEGIN 000000004 60320937719 Feb 24 13:50:09.95: [16382]: HylaFAX (tm) Version 4.2.0 Feb 24 13:50:09.95: [16382]: SEND FAX: JOB 2 DEST 20937719 COMMID 000000004 DEVICE '/dev/ttyS0'
Feb 24 13:50:09.95: [16382]: <-- [12:AT+FCLASS=1\r] Feb 24 13:50:10.19: [16382]: --> [2:OK] Feb 24 13:50:10.21: [16382]: DIAL 20937719 Feb 24 13:53:10.23: [16382]: SEND FAILED: JOB 2 DEST 20937719 ERR Unknown problem (check modem power) Feb 24 13:53:10.23: [16382]: <-- [5:ATH0\r] Feb 24 13:53:10.46: [16382]: --> [2:OK] Feb 24 13:53:10.46: [16382]: SESSION END


Unfortunately, I'm using USR Sportster modem and i'll follow up with Michele Petrazzo's email for this issue!

Thanks to everyone for helping me get past the 530 login incorrect error :)



Holger Bruenjes <holgerb...@gmx.net> wrote:

Hello

Am 2006-02-15 12:16, schrieb ja raju:
> Hi Michael,
>
> I'm still getting error 530 login incorrect :(
>
> Please help!

What are the rights from hosts.hfaxd chmod 600 must it

Holger

____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi

On UNIX: mail -s unsubscribe hylafax-users-request@hylafaxorg < /dev/null

*To learn about commercial HylaFAX(tm) support, mail sa...@ifax.com.*

---

Yahoo! Mail
Use Photomail to share photos without annoying attachments.