Limitation of SD file access
24 views
Skip to first unread message
Asad
Feb 28, 2012, 2:31:53 PM2/28/12
to ezLCD+ Support Group
I am using an ezLCD+101 with firmware v2.2c released in early 2009.
Are there any new firmware updates for this available or planned?
When using the SDFlist.exe file to list the files stored on the SD
card from within my PC application, only around 85-90 file names are
returned. My application requires datalogging which uses numerous
dated files. The SD card can have hundreds of such record files at a
time. Is there a way to increase the number of returned files through
SDFlist.exe file so that all my record files are listed in the
returned results?
Also, are x64 favr drivers available to make the LCD usable with x64
operating systems over USB?
Any help would be appreciated.
Are there any new firmware updates for this available or planned?
When using the SDFlist.exe file to list the files stored on the SD
card from within my PC application, only around 85-90 file names are
returned. My application requires datalogging which uses numerous
dated files. The SD card can have hundreds of such record files at a
time. Is there a way to increase the number of returned files through
SDFlist.exe file so that all my record files are listed in the
returned results?
Also, are x64 favr drivers available to make the LCD usable with x64
operating systems over USB?
Any help would be appreciated.
Reply all
Reply to author
Forward
0 new messages